Fatigue is one of the most occurring distresses in asphalt pavements. Asphalt binder plays a critical role in fatigue behavior of asphalt mixes. Modelling and predicting fatigue behavior of binders will result in more fatigue resistant mixes. In this research, possibility of using Date Seed Ash alongside two commonly used additives (namely, a siliceous and a limestone) as bitumen modifier were investigated. Then, the influence of these additives on fatigue behavior of asphalt binders and mixes was investigated. Linear Amplitude Sweep (LAS) test was carried out and Viscoelastic Continuum Damage (VECD) parameter was determined. In addition, Indirect Tensile Fatigue Test (ITFT) was performed on mixes containing these additives. Correlation equations were developed to link fatigue behavior of binders to those of mixes. The results showed acceptable agreement between binders and mixes fatigue testing results. In addition, with predicted models it was able to obtain the asphalt binders contribution to mixes fatigue resistance. However, in the case of ash modified samples, no good correlation was observed between fatigue behavior of binders and that of mixes.
1 June 2016 in Construction and Building Materials
In recent years, production of warm mix asphalt (WMA) mixtures with the help of chemical additives has been developed due to obvious advantages, such as reduction of pollution emissions, construction temperature and the possibility of carrying asphalt in long distances. Various additives can have positive or negative effects on the performance characteristics of WMA mixtures made from different types of aggregates. Although, effects of different types of aggregates have been more investigated on the performance of hot mix asphalt (HMA), the effects on WMA have been less studied. Therefore, in this study, three types of aggregates including: limestone (Li), siliceous (Si) and slag (Sl) from the metal production factories together with Sasobit and Zeolite additives were provided to be used for the WMA mixtures. After constructing the asphalt samples and determining the optimum binder, Marshall Stability, indirect tensile strength tests and resilient modulus test and the durability parameter determination were performed. Test results indicated that WMA-Sasobit mixtures have the greatest impact on reducing consumed percentage of binder in slag and siliceous aggregates compared to limestone aggregates. For both additives, WMA mixtures containing limestone aggregates showed higher resilient modulus and siliceous aggregates showed lower resilient modulus. Moreover, the results of indirect tensile strength of specimens containing limestone aggregates showed the highest value and siliceous aggregates showed the lowest one. TSR in the limestone and slag aggregates was improved using both additives, but Zeolite additives reduce TSR in the siliceous aggregates
13 April 2017 in Geotechnical and Geological Engineering