The proposed smooth bend structure was implemented with a 150-degree bend to reduce the asymmetrical part of the differential bend and thus prevent mode conversion loss and common-mode noise. The smooth bend structure maintained the differential signal integrity. In addition, we proposed several hybrid compensation methods to enhance common-mode noise suppression and concluded that a smooth bend using the “L-C-L” compensation method offered the best performance. The frequency-domain analysis, from direct current (DC) to 6 GHz, was suppressed below 17.3 dB for the differential to common-mode conversion loss (Scd21) and maintained a differential insertion loss (Sdd21) above 2.18 dB. Furthermore, the 150-degree bend, using the “L-C-L” compensation method, reduced common-mode noise by 48.9% compared with a 150-degree bend structure in the time-domain analysis. The significant advantage of the proposed structure is that it can be easily fabricated using the printed circuit board (PCB) manufacturing process, reducing costs. The measurement results of the proposed design showed good consistency with the simulations. The proposed hybrid compensation structure successfully reduced the undesirable effects caused by asymmetry; as a result, mode conversion suppression was improved, and common-mode noise was reduced.

An ultra-wideband common-mode (CM) filter for a gigahertz (GHz) data rate signal is proposed in this paper. The proposed filter was designed only on the printed circuit board (PCB) ground plane; no additional components wererequired. We took advantage of producing second-order transmission zero by an asymmetrical magnified coupled DGS to extend the suppression bandwidth. Full-wave simulations and equivalent circuit models of the DGS resonator were established to predict the suppression performance. The measured differential-mode insertion loss (S_dd21) from direct current (DC) to 12.35 GHz was obtained within the −3 dB definitionin the frequency domain. The CM noise was suppressed by more than10 dB in the frequency range from 2.9 GHz to 16.2 GHz. The fractional bandwidth (FBW) reached 139.3%. The proposed filter blocked 62.3% of the CM noise magnitude in the time domain measurement. In addition, the eye diagram measurement proved that good transmission quality was maintained. The proposed filter can be widely implemented to reduce electromagnetic interference (EMI) in radio frequency (RF) andWi-Fi (wireless fidelitystandard) 5 and 6E wireless communication applications.

A compact prototype of dual band monopole antenna has been fabricated on PCB with small overall size of 36.6 mm×47 mm. By the trial of simulation to tune the dimensions of PCB, an optimum design of antenna can be obtained. Dual resonances excited in 2.4 and 5 GHz bands. For return loss more than 9.6 dB, the achieved bandwidths are 2.41 to 2.77 GHz in 2.4 GHz band and 5.11 to 5.83 GHz in 5 GHz band. The return loss ( ) can keep larger than 9.6dB within the bands of 2.4 and 5 GHz.