The adsorption and corrosion inhibition properties of two imidazole derivatives namely, 2-(4-chlorophenyl)-1,4,5-triphenyl-1H-imidazole (IM-Cl) and 1,4,5-triphenyl-2-(p-tolyl)-1H-imidazole (IM-CH3) for mild steel in 0.5 M H2SO4 solution are studiedby electrochemical and computational calculations. The results obtained from the electrochemical methods show that IM-Cl and IM-CH3imparted high resistance and behave as mixed type inhibitors. Inhibition efficiency (IE %) increases with the increase of inhibitors concentration to attain 96 % and 91% at 10-3 M of IM-Cl and IM-CH3 respectively. EISdatais analyzed to model the inhibition process through appropriate equivalent circuit model. Thermodynamic and kinetic parameters controlling the adsorption process are calculated and discussed. DFT calculations are carried out at the B3LYP levels of theory with 6-31G (d,p) basis stein gas and aqueous phase for neutral and protonated forms. Quantum chemical calculations section of the study provides enough calculation and discussion on the relationship between corrosion inhibition and global reactivity descriptors.

In this work, a tetrafunctional epoxy resin entitled 2,3,4,5-tetraglycidyloxy pentanal (TGP) was tested and investigated as a potential corrosion inhibitor for mild steel (MS) in 0.5 M H₂SO₄ solution. The corrosion inhibition process for mild steel was employed alongside various techniques, such as potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), temperature effect (TE), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and theoretical approaches (DFT, MC, RDF and MD). Further, the corrosion efficacies obtained at the optimum concentration (10⁻³ M of the TGP) were 85.5% (EIS) and 88.6% (PDP), respectively. The PDP results indicated that the TGP tetrafunctional epoxy resin acted the same as an anodic inhibitor type in 0.5 M H₂SO₄ solution. SEM and EDS analyses found that the protective layer formed on the MS electrode surface in the presence of TGP could prevent the attack of the sulfur ions. The DFT calculation provided more information regarding the reactivity, geometric properties and the active centers of the corrosion inhibitory efficiency of the tested epoxy resin. RDF, MC and MD simulations showed that the investigated inhibitory resin have a maximum inhibition efficiency in 0.5 M H₂SO₄ solution.

Anticorrosive protection efficiency of novel tetrafunctional epoxy prepolymer, namely 2,3,4,5-tetraglycidyloxy pentanal (TGP), for mild steel in 1 M HCl medium was assessed through potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS), scanning electron microscope (SEM), energy dispersive X-ray spectroscopy (EDS), contact angle (CA), adsorption isotherm model, temperature effect and thermodynamic parameters. The synthesized TGP was characterized and confirmed by Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR). The inhibitory efficiencies found at lower concentration of the prepolymer TGP were85% (PDP) and 87.17% (EIS). PDP measurement illustrated that the TGP behaved as a mixed-type inhibitor in the realized solution. SEM and EDS analysis showeda significant decrease in the corrosion of the MS surface in the presence of the inhibitory prepolymer compared with the blank (1 M HCl). Langmuir adsorption isotherm is the most acceptable modelto describe the TGP epoxy prepolymer on the MS area.