Fiber optic sensors have become a mainstream sensing technology within a large array of applications due to their inherent benefits. They are now used significantly in structural health monitoring, and are an essential solution for monitoring harsh environments. Since their first development over 30 years ago, they have also found promise in security applications. This paper reviews all of the optical fiber-based techniques used in physical intrusion detection systems. It details the different approaches used for sensing, interrogation, and networking, by research groups, attempting to secure both commercial and residential premises from physical security breaches. The advantages and the disadvantages of the systems are discussed, and each of the different perimeter protection methods is outlined, namely, in-ground, perimeter fence, and window and door protection. This paper reviews the progress in optical fiber-based intrusion detection techniques from the past through to the current state-of-the-art systems and identifies areas, which may provide opportunities for improvement, as well as proposing future directions in this field.

With the sharp increase in global energy demand, industrial and residential buildings are responsible for around 40% of the energy consumed with most of this energy portion being generated by non-renewable sources, which significantly contribute to global warming and environmental hazards. The net-zero energy building (NZEB) concept attempts to solve the global warming issue, whereby a building will produce, on-site, its required energy demand throughout the year from renewable energy sources. This can be achieved by integrating photovoltaic (PV) building materials, called building-integrated photovoltaic (BIPV) modules, throughout the building skin, which simultaneously act as construction materials and energy generators. Currently, architects and builders are inclined to design a building using BIPV modules due to the limited colors available, namely, black or blue, which result in a monotonous building appearance. Therefore, there is an increasing demand/need to develop modern, aesthetically pleasing BIPV green energy products for the use of architects and the construction industry. This review article presents the current stage and future goal of advanced building integrated photovoltaic systems, focusing on the aesthetically appealing BIPV systems, and their applications towards overcoming global challenges and stepping forward to achieve a sustainable green energy building environment. Additionally, we present the summary and outlook for the future development of aesthetically appealing building integrated photovoltaic systems.

This paper reviews fiber Bragg grating sensing technology with respect to its use in mainstream industrial process applications. A review of the various types of sensors that have been developed for industries such as power generation, water treatment and services, mining, and the oil and gas sector has been performed. A market overview is reported as well as a discussion of some of the factors limiting their penetration into these markets. Furthermore, the author’s make recommendations for future work that would potentially provide significant opportunity for the advancement of fiber Bragg grating sensor networks in these mainstream industries.

The building integrated photovoltaic (BIPV) system is one of the contributors which has enormous potential to reach the goal of net-zero energy buildings (NZEB) that significantly reduce the use of fossil fuels that contribute to global warming. However, the limitations of the visual and aesthetic appearance of current BIPV systems make this aspiration unlikely. This study investigates the limitations of the single-color-based PV modules that are dull in appearance and have low photo-conversion efficiency (PCE). In order to solve this issue, we designed, developed, and characterized micro-patterned-based multicolored photovoltaic (MPCPV) modules which are applicable to net-zero building and development. Our newly developed MPCPV module exhibits an aesthetically attractive and flexible building color suitable for industrial application. Furthermore, the MPCPV module possesses an efficiency of 9.6%, which is 4.1% higher than a single-color PV module (5.5%) but closer to conventional thin-film PV modules. In addition, the other output parameters, such as short-circuit current (I_sc), open-circuit voltage (V_oc), maximum power (P_max), and fill factor (FF), indicate that our developed colored PV module is suitable for modern infrastructures that will enable energy generation on-site without compromising the aesthetic appearance. Finally, this research will have a substantial influence on the NZEB and will play an important part in the development of a sustainable environment.

Distributed acoustic emission sensors are used in structural health monitoring (SHM) for the detection of impacts and/or strain, in real time. Secondary damage may result from the initial impact or strain. This damage may include surface pitting, erosion, or cracking. This type of damage may not be detectable by the SHM system, specifically in passive fiber optic based sensing systems. The integration of non-destructive evaluation (NDE) by robots into SHM enables the detection and monitoring of a wider variety of damage. Communicating via acoustic transmissions represents a wireless communications method for use by NDE inspection robots to communicate with an integrated SHM system that does not require any additional hardware, as piezoelectric transducers are commonly used in the NDE of materials. In this paper, we demonstrate the detection of both acoustic emissions and transmissions with a fiber Bragg grating (FBG) sensor. The acoustic communications channel comprises of a piezoelectric transmitter, an aluminum panel as the transmission medium, and a FBG receiver. Phase Shift Keying was used to encode the acoustic transmissions. Results for the frequency and transient response of the channel are presented.