In this paper the operation of an amperometric biosensor producing a chemically amplified signal is modelled numerically. The chemical amplification is achieved by using synergistic substrates. The model is based on non-stationary reaction-diffusion equations. The model involves three layers (compartments): a layer of enzyme solution entrapped on the electrode surface, a dialysis membrane covering the enzyme layer and an outer diffusion layer which is modelled by the Nernst approach. The equation system is solved numerically by using the finite difference technique. The biosensor response and sensitivity are investigated by altering the model parameters influencing the enzyme kinetics as well as the mass transport by diffusion. The biosensor action was analyzed with a special emphasis to the effect of the chemical amplification. The simulation results qualitatively explain and confirm the experimentally observed effect of the synergistic substrates conversion on the biosensor response.
In this paper, an amperometric glucose biosensor is modeled numerically. The model is based on non-stationary reaction-diffusion type equations. The model consists of four layers. An enzyme layer lies directly on a working electrode surface. The enzyme layer is attached to an electrode by a polyvinyl alcohol (PVA) coated terylene membrane. This membrane is modeled as a PVA layer and a terylene layer, which have different diffusivities. The fourth layer of the model is the diffusion layer, which is modeled using the Nernst approach. The system of partial differential equations is solved numerically using the finite difference technique. The operation of the biosensor was analyzed computationally with special emphasis on the biosensor response sensitivity to oxygen when the experiment was carried out in aerobic conditions. Particularly, numerical experiments show that the overall biosensor response sensitivity to oxygen is insignificant. The simulation results qualitatively explain and confirm the experimentally observed biosensor behavior.
Šiame straipsnyje yra tiriamas amperometrinis biojutiklis, kuriame biojutiklio atsakas yra stiprinamas chemiškai – sinerginiais substratais. Tokiuose biojutikliuose, be substrato, kurio koncentracija matuojama, naudojamas ir pagalbinis substratas, reikalingas substratų sinergetikai. Biojutiklis yra modeliuojamas naudojant nestacionarias netiesines reakcijos-difuzijos lygtis. Modeliuojami keturi biojutiklio sluoksniai: fermento sluoksnis, kuriame vyksta visos biocheminės reakcijos ir difuzija, dializėsmembrana ir difuzijos sluoksnis, kuriuose vyksta tik difuzija ir reakcijos, kuriose nedalyvauja fermentas, o ketvirtasis sluoksnis yra tirpalo dalis, kurioje palaikoma vienoda medžiagų koncentracija. Lygčių sistema sprendžiama skaitiškai, naudojant baigtinių skirtumų metodą. Tiriama biojutiklio atsako bei jautrio priklausomybė nuo substratų koncentracijų ir nuo difuzijos sluoksnio storio.Modelling Amperometric Biosensors with Synergistic Substrate AmplificationDainius Šimelevičius, Romas Baronas SummaryComputational modelling of a biosensor in which chemical amplification by synergistic substrates takes place was investigated in this study. In the biosensors of this type, in addition to the substrate (analyte), another auxiliary substrate is used. It is necessary to achieve the substrates synergy. The operation of the biosensor is modelled using non-stationary reactiondiffusion equations. The model involves four regions: the enzyme layer where the enzymatic reactions as well as the mass transport by diffusion take place, the dialysis membrane and the diffusion limiting region where the mass transport by diffusion and non-enzymatic reactions take place, and the convective region in which the analyte concentration is maintained constant. The equation system is solved numerically using the finite difference technique. The biosensor response dependency on substrate concentrations and the diffusion layer thickness, as well as the biosensor sensitivity dependence on the same parameters have been studied."line-height: 18px;">