In recent years, many agriculture-related problems have been evaluated with the integration of artificial intelligence techniques and remote sensing systems. Specifically, in fruit detection problems, several recent works were developed using Deep Learning (DL) methods applied in images acquired in different acquisition levels. However, the increasing use of anti-hail plastic net cover in commercial orchards highlights the importance of terrestrial remote sensing systems. Apples are one of the most highly-challenging fruits to be detected in images, mainly because of the target occlusion problem occurrence. Additionally, the introduction of high-density apple tree orchards makes the identification of single fruits a real challenge. To support farmers to detect apple fruits efficiently, this paper presents an approach based on the Adaptive Training Sample Selection (ATSS) deep learning method applied to close-range and low-cost terrestrial RGB images. The correct identification supports apple production forecasting and gives local producers a better idea of forthcoming management practices. The main advantage of the ATSS method is that only the center point of the objects is labeled, which is much more practicable and realistic than bounding-box annotations in heavily dense fruit orchards. Additionally, we evaluated other object detection methods such as RetinaNet, Libra Regions with Convolutional Neural Network (R-CNN), Cascade R-CNN, Faster R-CNN, Feature Selective Anchor-Free (FSAF), and High-Resolution Network (HRNet). The study area is a highly-dense apple orchard consisting of Fuji Suprema apple fruits (Malus domestica Borkh) located in a smallholder farm in the state of Santa Catarina (southern Brazil). A total of 398 terrestrial images were taken nearly perpendicularly in front of the trees by a professional camera, assuring both a good vertical coverage of the apple trees in terms of heights and overlapping between picture frames. After, the high-resolution RGB images were divided into several patches for helping the detection of small and/or occluded apples. A total of 3119, 840, and 2010 patches were used for training, validation, and testing, respectively. Moreover, the proposed method’s generalization capability was assessed by applying simulated image corruptions to the test set images with different severity levels, including noise, blurs, weather, and digital processing. Experiments were also conducted by varying the bounding box size (80, 100, 120, 140, 160, and 180 pixels) in the image original for the proposed approach. Our results showed that the ATSS-based method slightly outperformed all other deep learning methods, between 2.4% and 0.3%. Also, we verified that the best result was obtained with a bounding box size of 160 × 160 pixels. The proposed method was robust regarding most of the corruption, except for snow, frost, and fog weather conditions. Finally, a benchmark of the reported dataset is also generated and publicly available.

As key-components of the urban-drainage system, storm-drains and manholes are essential to the hydrological modeling of urban basins. Accurately mapping of these objects can help to improve the storm-drain systems for the prevention and mitigation of urban floods. Novel Deep Learning (DL) methods have been proposed to aid the mapping of these urban features. The main aim of this paper is to evaluate the state-of-the-art object detection method RetinaNet to identify storm-drain and manhole in urban areas in street-level RGB images. The experimental assessment was performed using 297 mobile mapping images captured in 2019 in the streets in six regions in Campo Grande city, located in Mato Grosso do Sul state, Brazil. Two configurations of training, validation, and test images were considered. ResNet-50 and ResNet-101 were adopted in the experimental assessment as the two distinct feature extractor networks (i.e., backbones) for the RetinaNet method. The results were compared with the Faster R-CNN method. The results showed a higher detection accuracy when using RetinaNet with ResNet-50. In conclusion, the assessed DL method is adequate to detect storm-drain and manhole from mobile mapping RGB images, outperforming the Faster R-CNN method. The labeled dataset used in this study is available for future research.

Urban forests contribute to maintaining livability and increase the resilience of cities in the face of population growth and climate change. Information about the geographical distribution of individual trees is essential for the proper management of these systems. RGB high-resolution aerial images have emerged as a cheap and efficient source of data, although detecting and mapping single trees in an urban environment is a challenging task. Thus, we propose the evaluation of novel methods for single tree crown detection, as most of these methods have not been investigated in remote sensing applications. A total of 21 methods were investigated, including anchor-based (one and two-stage) and anchor-free state-of-the-art deep-learning methods. We used two orthoimages divided into 220 non-overlapping patches of 512 × 512 pixels with a ground sample distance (GSD) of 10 cm. The orthoimages were manually annotated, and 3382 single tree crowns were identified as the ground-truth. Our findings show that the anchor-free detectors achieved the best average performance with an $\mathrm{A}{\mathrm{P}}_{50}$ of 0.686. We observed that the two-stage anchor-based and anchor-free methods showed better performance for this task, emphasizing the FSAF, Double Heads, CARAFE, ATSS, and FoveaBox models. RetinaNet, which is currently commonly applied in remote sensing, did not show satisfactory performance, and Faster R-CNN had lower results than the best methods but with no statistically significant difference. Our findings contribute to a better understanding of the performance of novel deep-learning methods in remote sensing applications and could be used as an indicator of the most suitable methods in such applications.

Fire in Brazilian Pantanal represents a serious threat to biodiversity. The Brazilian National Institute of Spatial Research (INPE) has a program named Queimadas, which estimated from January 2020 to October 2020, a burned area in Pantanal of approximately 40,606 km${}^2$. This program also provides daily data of active fire (fires spots) from a methodology that uses MODIS (Aqua and Terra) sensor data as reference satellites, which presents limitations mainly when dealing with small active fires. Remote sensing researches on active fire dynamics have contributed to wildfire comprehension, despite generally applying low spatial resolution data. Convolutional Neural Networks (CNN) associated with high- and medium-resolution remote sensing data may provide a complementary strategy to small active fire detection. We propose an approach based on object detection methods to map active fire in the Pantanal. In this approach, a post-processing strategy is adopted based on Non-Max Suppression (NMS) to reduce the number of highly overlapped detections. Extensive experiments were conducted, generating 150 models, as five-folds were considered. We generate a public dataset with 775-RGB image patches from the Wide Field Imager (WFI) sensor onboard the China Brazil Earth Resources Satellite (CBERS) 4A. The patches resulted from 49 images acquired from May to August 2020 and present a spatial and temporal resolutions of 55 m and five days, respectively. The proposed approach uses a point (active fire) to generate squared bounding boxes. Our findings indicate that accurate results were achieved, even considering recent images from 2021, showing the generalization capability of our models to complement other researches and wildfire databases such as the current program Queimadas in detecting active fire in this complex environment. The approach may be extended and evaluated in other environmental conditions worldwide where active fire detection is still a required information in fire fighting and rescue initiatives.

Mapping utility poles using side-view images acquired with car-mounted cameras is a time-consuming task, mainly in larger areas due to the need for street-by-street surveying. Aerial images cover larger areas and can be feasible alternatives although the detection and mapping of the utility poles in urban environments using top-view images is challenging. Thus, we propose the use of Adaptive Training Sample Selection (ATSS) for detecting utility poles in urban areas since it is a novel method and has not yet investigated in remote sensing applications. Here, we compared ATSS with Faster Region-based Convolutional Neural Networks (Faster R-CNN) and Focal Loss for Dense Object Detection (RetinaNet ), currently used in remote sensing applications, to assess the performance of the proposed methodology. We used 99,473 patches of 256 × 256 pixels with ground sample distance (GSD) of 10 cm. The patches were divided into training, validation and test datasets in approximate proportions of 60%, 20% and 20%, respectively. As the utility pole labels are point coordinates and the object detection methods require a bounding box, we assessed the influence of the bounding box size on the ATSS method by varying the dimensions from $30\times 30$ to $70\times 70$ pixels. For the proposal task, our findings show that ATSS is, on average, 5% more accurate than Faster R-CNN and RetinaNet. For a bounding box size of $40\times 40$, we achieved Average Precision with intersection over union of 50% ($A{P}_{50}$) of 0.913 for ATSS, 0.875 for Faster R-CNN and 0.874 for RetinaNet. Regarding the influence of the bounding box size on ATSS, our results indicate that the $A{P}_{50}$ is about 6.5% higher for $60\times 60$ compared to $30\times 30$. For $A{P}_{75}$, this margin reaches 23.1% in favor of the $60\times 60$ bounding box size. In terms of computational costs, all the methods tested remain at the same level, with an average processing time around of 0.048 s per patch. Our findings show that ATSS outperforms other methodologies and is suitable for developing operation tools that can automatically detect and map utility poles.