Due to ecological environmental fragility and soil erosion in Guangxi, studies of landscape patterns and associated ecological risks are needed to guide sustainable land development and ecologically sensitive land management. This study assesses dynamic spatial and temporal change patterns in land use and ecological risks based on 30 m land-use data, analyzes spatial correlations with ecological risks, and explores natural and socio-economic factor impacts on ecological risks. The results reveal: (1) A rapid and sizeable construction land increase in Guangxi from 2000 to 2018 associated mainly with loss of woodland and grassland. (2) Guangxi had the highest number of arable land patches from 2000 to 2018, and the distribution tended to be fragmented; moreover, the construction land gradually expanded outward from concentrated areas to form larger aggregates with increasing internal stability each year. (3) Guangxi ecological risk levels were low, low–medium, and medium, with significantly different spatial distributions observed for areas possessing different ecological risk levels. Regional ecological risk gradually decreased from the middle Guangxi regions to the surrounding areas and was positively correlated with spatial distribution. (4) Socio-economic factor impacts on ecological risk exceeded natural factor impacts. These results provide guidance toward achieving ecologically sensitive regional land-use management and ecological risk reduction and control, it can also provide a reference for ecological risk research in other similar regions in the world.

When employing remote sensing images, it is challenging to classify vegetation species and ground objects due to the abundance of wetland vegetation species and the high fragmentation of ground objects. Remote sensing images are classified primarily according to their spatial resolution, which significantly impacts the classification accuracy of vegetation species and ground objects. However, there are still some areas for improvement in the study of the effects of spatial resolution and resampling on the classification results. The study area in this paper was the core zone of the Huixian Karst National Wetland Park in Guilin, Guangxi, China. The aerial images (Am) with different spatial resolutions were obtained by utilizing the UAV platform, and resampled images (An) with different spatial resolutions were obtained by utilizing the pixel aggregation method. In order to evaluate the impact of spatial resolutions and resampling on the classification accuracy, the Am and the An were utilized for the classification of vegetation species and ground objects based on the geographic object-based image analysis (GEOBIA) method in addition to various machine learning classifiers. The results showed that: (1) In multi-scale images, both the optimal scale parameter (SP) and the processing time decreased as the spatial resolution diminished in the multi-resolution segmentation process. At the same spatial resolution, the SP of the An was greater than that of the Am. (2) In the case of the Am and the An, the appropriate feature variables were different, and the spectral and texture features in the An were more significant than those in the Am. (3) The classification results of various classifiers in the case of the Am and the An exhibited similar trends for spatial resolutions ranging from 1.2 to 5.9 cm, where the overall classification accuracy increased and then decreased in accordance with the decrease in spatial resolution. Moreover, the classification accuracy of the Am was higher than that of the An. (4) When vegetation species and ground objects were classified at different spatial scales, the classification accuracy differed between the Am and the An.

The ecological security pattern is an important way to coordinate the contradiction between regional economic development and ecological protection and is conducive to promoting regional sustainable development. This study examines Guangxi, a karst region in China. The ecosystem service function and ecological environment sensitivity were both selected to evaluate the ecological conservation importance, and based on the results of the ecological conservation importance evaluation, suitable patches were selected as ecological sources. Meanwhile, resistance factors were selected from both natural factors and human activities to construct a comprehensive resistance surface, circuit theory was used to identify ecological corridors, ecological pinch points, and ecological barrier points, and ecological protection suggestions were then proposed. The results show that there are 50 patches of ecological sources in Guangxi, with a total area of 60,556.99 km²; 115 ecological corridors, with the longest corridor reaching 194.97 km; 301 ecological pinch points, whose spatial distribution is fragmented; and 286 ecological barrier points, most of which are concentrated in the central part of Guangxi. The results of this study provide a reference for the construction of ecological security patterns and ecological conservation in developing countries and karst areas.

Individual structural parameters of trees, such as forest stand tree height and biomass, serve as the foundation for monitoring of dynamic changes in forest resources. Individual tree structural parameters are closely related to individual tree crown segmentation. Although three-dimensional (3D) data have been successfully used to determine individual tree crown segmentation, this phenomenon is influenced by various factors, such as the (i) source of 3D data, (ii) the segmentation algorithm, and (iii) the tree species. To further quantify the effect of various factors on individual tree crown segmentation, light detection and ranging (LiDAR) data and image-derived points were obtained by unmanned aerial vehicles (UAVs). Three different segmentation algorithms (PointNet++, Li2012, and layer-stacking segmentation (LSS)) were used to segment individual tree crowns for four different tree species. The results show that for two 3D data, the crown segmentation accuracy of LiDAR data was generally better than that obtained using image-derived 3D data, with a maximum difference of 0.13 in F values. For the three segmentation algorithms, the individual tree crown segmentation accuracy of the PointNet++ algorithm was the best, with an F value of 0.91, whereas the result of the LSS algorithm yields the worst result, with an F value of 0.86. Among the four tested tree species, the individual tree crown segmentation of Liriodendron chinense was the best, followed by Magnolia grandiflora and Osmanthus fragrans, whereas the individual tree crown segmentation of Ficus microcarpa was the worst. Similar crown segmentation of individual Liriodendron chinense and Magnolia grandiflora trees was observed based on LiDAR data and image-derived 3D data. The crown segmentation of individual Osmanthus fragrans and Ficus microcarpa trees was superior according to LiDAR data to that determined according to image-derived 3D data. These results demonstrate that the source of 3D data, the segmentation algorithm, and the tree species all have an impact on the crown segmentation of individual trees. The effect of the tree species is the greatest, followed by the segmentation algorithm, and the effect of the 3D data source. Consequently, in future research on individual tree crown segmentation, 3D data acquisition methods should be selected based on the tree species, and deep learning segmentation algorithms should be adopted to improve the crown segmentation of individual trees.

Most research on forest tree species classification based on optical image data uses information such as spectral reflectance, vegetation index, texture, and phenology data. However, owing to the limited spectral resolution of multispectral images and the high cost of hyperspectral data, there is room for improvement in the classification of tree species in large areas based on optical images. The combined application of multispectral images and other auxiliary data can provide a new method for improving tree species classification accuracy. Hence, Sentinel-2 images were used to extract spectral reflectance, spectral index, texture, and phenological information. Data for topography, precipitation, air temperature, ultraviolet aerosol index, NO₂ concentration, and other variables were included as auxiliary data. Models for forest tree species classification were constructed through feature combination and feature optimization using the random forest (RF), gradient tree boost (GTB), support vector machine (SVM), and classification and regression tree (CART) algorithms. The classification results of 16 feature combinations with the 4 classification methods were compared, and the contributions of different features to the classification models of forest tree species were evaluated. Finally, the optimal classification model was selected to identify the spatial distribution of forest tree species in the study area. The model based on feature optimization gave the best results among the 16 feature combination models. The overall accuracy and kappa coefficient were increased by 18% and 0.21, respectively, compared with the spectral classification model, and by 17% and 0.20, respectively, compared with the spectral and spectral index classification model. By analyzing the feature optimization model, it was found that terrain, ultraviolet aerosol index, and phenological information ranked as the top three features in terms of importance. Although the importance of spectral reflectance and spectral index features was lower, the number of feature variables accounted for a large proportion of the total. The importance of commonly used texture features was limited, and these features were not present in the feature optimization model. The RF algorithm had the highest classification accuracy, with an overall accuracy of 82.69% and a kappa coefficient of 0.80, among the four classification algorithms. The results of GTB were close to those of RF, and the difference in overall classification accuracy was only 0.14%. However, the results of the SVM and CART algorithms were relatively weaker, with overall classification accuracies of about 70%. It can be concluded that the combined application of Sentinel-2 images and auxiliary data can improve forest tree species classification accuracy. The model based on feature optimization achieved the highest classification accuracy among the 16 feature combination models. The spectral reflectance and spectral index data extracted from optical images are useful for tree species classification, but the effect of texture features was very limited. Auxiliary data, such as topographic features, ultraviolet aerosol index, phenological features, NO₂ concentration features, topographic diversity features, precipitation features, temperature features, and multi-scale topographic location index data, can effectively improve forest tree species classification accuracy. The RF algorithm had the highest accuracy, and it can be used for tree species classification space distribution identification. The combined application of Sentinel-2 images and auxiliary data can improve classification accuracy, but the highest accuracy of the model was only 82.69%, which leaves room for improvement. Thus, more effective auxiliary data and the vertical structural parameters extracted from satellite LiDAR can be combined with multispectral images to improve forest tree species classification accuracy in future research.

Analysis and prediction of urban ecological risk are crucial means for resolving the dichotomy between ecological preservation and economic development, thereby enhancing regional ecological security and fostering sustainable development. This study uses Nanning, a Chinese landscape garden city, as an example. Based on spatial granularity and extent perspectives, using 30 m land use data, the optimal scale for an ecological risk assessment (ERA) and prediction is confirmed. This study also explores the patterns of spatial and temporal changes in ecological risk in Nanning on the optimal scale. At the same time, the Patch-generating Land Use Simulation model is used to predict Nanning’s ecological risk in 2036 under two scenarios and to propose ecological conservation recommendations in light of the study results. The study results show that: a spatial granularity of 120 m and a spatial extent of 7 km are the best scales for ERA and prediction in Nanning. Although the spatial distribution of ecological risk levels is obviously different, the overall ecological risk is relatively low, and under the scenario of ecological protection in 2036, the area of high ecological risk in Nanning is small. The results can provide theoretical support for ERA and the prediction of landscape cities and ecological civilization construction.