HONG ZHIHAO

Mr. HONG ZHIHAO


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2022 in Coatings
Verified
Journal Article
Open access
PDF file
HZHONG ZHIHAO
HONG ZHIHAO
LWLong Wang
Long Wang
WZWei Zhang
Wei Zhang
JYJian Yang
Jian Yang
YFYongjin Feng
Yongjin Feng
XWXiaoyu Wang
Xiaoyu Wang
The hydrogen permeation behavior of novel AlCrFeTiNb, AlCrMoNbZr and AlCrFeMoTi high-entropy alloy (HEA) coatings were investigated. The hydrogen permeability of HEA coatings prepared by magnetron sputtering technology were tested using gas-driven deuterium permeation and electrochemical hydrogen permeation methods. The gas-driven permeation results show that the deuterium permeation resistance of the AlCrFeTiNb coating is the worst because of the unstable structure at a high temperature. Scanning electron microscope (SEM) and X-ray Diffraction (XRD) analysis proved a loose surface morphology of the AlCrFeTiNb coating and demonstrated the formation of iron-based oxides after deuterium permeation experiments. A high content of iron in HEA coating is disadvantageous for improving the hydrogen permeability. Differently, electrochemical hydrogen permeation reveals that the AlCrMoNbZr coating could resist hydrogen permeation better in a corrosive environment (0.2 mol/L KOH solution). The AlCrFeMoTi coating was peeled off after an electrochemical hydrogen permeation test due to the poor corrosion resistance. The hydrogen behavior of HEA coatings was discussed in detail. Our study provides a promising thought on hydrogen permeation of HEA coatings.

10 July 2022 in Coatings
Verified
Journal Article
Open access
PDF file
HZHONG ZHIHAO
HONG ZHIHAO
LWLong Wang
Long Wang
YFYongjin Feng
Yongjin Feng
BGBaoping Gong
Baoping Gong
JYJijun Yang
Jijun Yang
XWXiaoyu Wang
Xiaoyu Wang
Pre-depositing a Pd film is crucial for accurately acquiring the hydrogen permeability of metal materials, as it permits the production of ultra-pure hydrogen. However, the microstructure of Pd film and its effect on the hydrogen isotope permeation behavior of substrate materials have been neglected. In this study, Pd films were deposited on China Low-activation Ferritic (CLF−1) steel by magnetron sputtering. The effect of sputtering pressure on the microstructure and deuterium permeation behavior of Pd films at temperatures of 550−650 °C is presented. SEM results demonstrated that the films had a columnar crystal structure with a thickness of 0.6 ± 0.2 μm. The gas-driven permeation results revealed that the deuterium ion current intensity of the coated CLF−1 sample was at least three times lower than that of uncoated CLF−1 steel, which was influenced by the combined effect of oxygen and surface cracks. Oxygen could not be excluded from the films at a sputtering pressure of 10−3 Pa order of magnitude. It was also found that the films cracked during deuterium permeation experiments, which affected the deuterium permeation behavior. Films with large surface coverage and small grain sizes exhibited better cracking resistance. Our study provides promising insights into the hydrogen permeability of Pd films.

25 October 2024 in Materials
Verified
Journal Article
Open access
PDF file
YLYinghong Li
Yinghong Li
LNLihong Nie
Lihong Nie
FMFantao Meng
Fantao Meng
HHHaixiang Hu
Haixiang Hu
SZSifan Zong
Sifan Zong
Hu JingHu Jing
Hu Jing
Depositing a tritium permeation barrier on the surface of materials is a key method for reducing tritium permeability. During actual operational processes, the surface of the tritium permeation barrier may experience mechanical damage, such as spalling and scratches. The hydrogen permeability resistance of the coating will degrade due to such forms of mechanical damage. It is a significant engineering challenge to evaluate the impact of these damages on the coating’s tritium resistance. In this experiment, the mechanical damage to the FeAl/Al2O3 tritium permeation barrier on 316L stainless steel was simulated through scratching, debonding, and thermal shock. Subsequently, a hydrogen isotope gas drive permeation (GDP) test was conducted. The influence of the degree of mechanical damage on the coating’s tritium permeation behavior was assessed and discussed. The results indicate that, under the same damage mechanism, the coating’s tritium permeability resistance is positively correlated with the integrity of the coating. Additionally, the impact of scratches on the coating surface is more severe than that of other damage mechanisms.

12 September 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
YLYinghong Li
Yinghong Li
LNLihong Nie
Lihong Nie
FMFantao Meng
Fantao Meng
HHHaixiang Hu
Haixiang Hu
SZSifan Zong
Sifan Zong
Hu JingHu Jing
Hu Jing
A tritium resistant coating on the surface of materials is one of the main methods to reduce tritium permeability. In actual operating processes, mechanical damage such as spalling and scratches will occur on the surface of tritium resistant coatings. These mechanical damages will affect the hydrogen permeability resistance of the coatings. It is an important engineering problem that evaluate the effect of these damage on the tritium resistance of the coating. In this experiment, the mechanical damage of FeAl/Al2O3 tritium resistant coating on 316L stainless steel was simulated by scratching, debonding and thermal shock, and the gas hydrogen isotope permeation (GDP) test was carried out. The influence of mechanical damage degree on the tritium permeation behaviour of the coating was evaluated and discussed.