Defect detection of track fasteners is a prerequisite for safe and reliable railroad operation. The traditional manual visual inspection method has been unable to meet the growing demand for railroad network inspection in China. To achieve the need for accurate, fast, and intelligent detection of rail fasteners, this paper proposes a rail fastener defect detection model based on improved YOLOv5s. Firstly, the convolutional block attention module (CBAM) is added to the Neck network of the YOLOv5s model to enhance the extraction of essential features by the model and suppress the information of minor features. Secondly, a weighted bidirectional feature pyramid network (BiFPN) is introduced to realize the multi-scale feature fusion of the model. Finally, the K-means++ algorithm is used to re-cluster the dataset to obtain the anchor box suitable for the fastener dataset and improve the positioning ability of the model. The experimental results show that the improved model achieves an average mean precision (mAP) of 97.4%, a detection speed of 27.3 FPS, and a model memory occupancy of 15.5 M. Compared with the existing target detection model, the improved model has the advantages of high detection accuracy, fast detection speed, and small model memory occupation, which can provide technical support for edge deployment of rail fastener defect detection.

Searching for the contact points between wheels and rails is important because these points represent the points of exerted contact forces. In order to obtain an accurate contact point and an in-depth description of the wheel/rail contact behaviours on a curved track or in a turnout, a method with improved accuracy in three dimensions is proposed to determine the contact points and the contact patches between the wheel and the rail when considering the effect of the yaw angle and the roll angle on the motion of the wheel set. The proposed method, with no need of the curve fitting of the wheel and rail profiles, can accurately, directly, and comprehensively determine the contact interface distances between the wheel and the rail. The range iteration algorithm is used to improve the computation efficiency and reduce the calculation required. The present computation method is applied for the analysis of the contact of rails of CHINA (CHN) 75 kg/m and wheel sets of wearing type tread of China's freight cars. In addition, it can be proved that the results of the proposed method are consistent with that of Kalker's program CONTACT, and the maximum deviation from the wheel/rail contact patch area of this two methods is approximately 5%. The proposed method, can also be used to investigate static wheel/rail contact. Some wheel/rail contact points and contact patch distributions are discussed and assessed, wheel and rail non-worn and worn profiles included.

The fracture phenomenon of fastener clips occurs frequently in the sections with serious rail corrugation of high-speed railway, which brings huge potential safety hazards to track service and driving safety. In order to prevent the vibration fatigue fracture of fastener clips in high-speed railway, a dynamic vibration absorber (DVA) for clips is proposed in this paper to suppress the primary sensitive frequency of the corresponding resonant of clips. Firstly, based on the optimal design theory of DVA, a parameters design method of ring-shaped DVA suitable for clips is proposed. Secondly, the vibration characteristics of the high-speed railway fastener system are investigated, and the main reason for the fastener clips fracture is analyzed by simulation analysis combined with filed test. Then, focusing on the primary resonant frequency of clips, the vibration reduction effect of the ring-shaped DVA is analyzed. The results show that the ring-shaped DVA can change the natural frequency of the clip system, reduce the vibration response in the range of the original resonant frequency, and avoid the resonance phenomenon. Finally, the influences of mass ratio, frequency ratio, and damping ratio on the vibration reduction effect are analyzed, and the effectiveness of the parameters design method of ring-shaped DVA proposed in this paper is further proved. The research results can provide methodological support for the anti-breakage design of high-speed railway fastener clips.