Ibrahim Gad-el-Hak

Mr. Ibrahim Gad-el-Hak

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
AHAhmed E. Hussin
Ahmed E. Hussin
AHAshraf Hamed
Ashraf Hamed
NMNabil Mahmoud
Nabil Mahmoud
The present paper provides a numerical study that leads to the proper selection of a working fluid for use in low-temperature organic Rankine cycle (ORC) applications. This selection is not only based on the provision of best efficiency but also to comply with global warming potential (GWP) regulations. For that purpose, different pure organic working fluids, including R245fa, R236fa, R123, R600a, R134a, and R1234yf as well as zeotropic mixture R245fa/R600a, are selected. The investigation is conducted on a single stage radial inflow turbo-expander, which was originally used in the Sundstrand Power Systems T-100 Multipurpose Small Power Unit. The commercial package ANSYS-CFX (version 16.0) was used to perform the numerical study using 3D Reynolds-Averaged Navier–Stokes (RANS) simulations. Peng–Robinson equation of state is adopted in the finite-volume solver ANSYS-CFX to determine the real-gas properties. The obtained results show that, while the use of R134a and R1234yf provides the best efficiency of all the working fluids under investigation, the latter is best selected for its comparatively low global warming effects.

30 June 2022 in Scientific Reports
Verified
Journal Article
Open access
PDF file
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
NMNjuki Mureithi
Njuki Mureithi
Shark gill slits enable sharks to eject the water after the oxygen has been removed in ram ventilation. The reduced effect of jet flow from the gill slits gives sharks smooth maneuverability. A biomimetic “shark nozzle” is proposed to improve mixing between the jet flow and surrounding fluid. Jet flow systems are an essential component of many industrial applications. The key characteristic of jet flow is the mixing process that occurs between two fluid streams to allow heat and/or mass transfer between them. Many industrial and propulsion devices that use jet flows need rapid mixing for effective and environmentally friendly operation. Fuel-injection systems, chemical reactors, and heating and air conditioning systems are examples of devices where a mixing process takes place. Recently, jet flow plays an important role in design and operation of specialized nuclear pressurized water reactors (PWRs). The loss-of-coolant accident (LOCA) holes and slots machined in the core periphery baffle plates are designed to mitigate the effects of a severe LOCA event. However, in normal operation, the holes are a source of a jet flow that can induced vibrations in the fuel assemblies near the baffle before being mixed with the surrounding fluid. This may cause wear and fretting in fuel rods with their supports. The ultimate solution to prevent the fuel assembly vibrations from LOCA hole jetting in a reactor is enhancing mixing of a jet flow with ambient flow in order to rapidly reduce jet momentum. This work proposes a new shark-inspired nozzle design that exploits the observed high efficiency capacity of shark gill slits. Tests are conducted to evaluate the performance of the new design. The obtained results show that the shark-inspired biomimetic nozzle has a greater effect on the rod bundle vibration, and the critical velocity at which the unstable vibration occurs in the rod bundle is delayed by 20% using the biomimetic nozzle. In addition to delaying instability, a vibration amplitude reduction of 85% was obtained by using the proposed shark-inspired nozzle instead of the circular nozzle.

8 February 2023 in Journal of Sound and Vibration
Verified
Journal Article
Closed access
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
NMNjuki Mureithi
Njuki Mureithi
KKKostas Karazis
Kostas Karazis
GWGary Williams
Gary Williams

29 November 2022 in Nuclear Engineering and Design
Verified
Journal Article
Closed access
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
NMNjuki Mureithi
Njuki Mureithi
KKKostas Karazis
Kostas Karazis
GWGary Williams
Gary Williams

12 July 2023 in Journal of Fluids and Structures
Verified
Journal Article
Closed access
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
NMNjuki Mureithi
Njuki Mureithi
KKKostas Karazis
Kostas Karazis

22 March 2019 in Biomimetics
Verified
Journal Article
Open access
PDF file
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
Inspired by bird feather structures that enable the resistance of powerful aerodynamic forces in addition to their lower weight to provide stable flight, a biomimetic composite turbine blade was proposed for a low-temperature organic Rankine cycle (ORC) turboexpander that is capable of producing lower weight expanders than that of stainless steel expanders, in addition to reduce its manufacturing cost, and hence it may contribute in spreading ORC across nonconventional power systems. For that purpose, the fluid–structure interaction (FSI) was numerically investigated for a composite turbine blade with bird-inspired fiber orientations. The aerodynamic forces were evaluated by computational fluid dynamics (CFD) using the commercial package ANSYS-CFX (version 16.0) and then these aerodynamic forces were transferred to the solid model of the proposed blade. The structural integrity of the bird-mimetic composite blade was investigated by performing finite element analysis (FEA) of composite materials with different fiber orientations using ANSYS Composite PrepPost (ACP). Furthermore, the obtained mechanical performance of the composite turbine blades was compared with that of the stainless steel turbine blades. The obtained results indicated that fiber orientation has a greater effect on the deformation of the rotor blades and the minimum value can be achieved by the same barb angle inspired from the flight feather. In addition to a significant effect in the weight reduction of 80% was obtained by using composite rotor blades instead of stainless steel rotor blades.