Nabil Mahmoud

Prof. Nabil Mahmoud


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
IGIbrahim Gad-el-Hak
Ibrahim Gad-el-Hak
AHAhmed E. Hussin
Ahmed E. Hussin
AHAshraf Hamed
Ashraf Hamed
NMNabil Mahmoud
Nabil Mahmoud
The present paper provides a numerical study that leads to the proper selection of a working fluid for use in low-temperature organic Rankine cycle (ORC) applications. This selection is not only based on the provision of best efficiency but also to comply with global warming potential (GWP) regulations. For that purpose, different pure organic working fluids, including R245fa, R236fa, R123, R600a, R134a, and R1234yf as well as zeotropic mixture R245fa/R600a, are selected. The investigation is conducted on a single stage radial inflow turbo-expander, which was originally used in the Sundstrand Power Systems T-100 Multipurpose Small Power Unit. The commercial package ANSYS-CFX (version 16.0) was used to perform the numerical study using 3D Reynolds-Averaged Navier–Stokes (RANS) simulations. Peng–Robinson equation of state is adopted in the finite-volume solver ANSYS-CFX to determine the real-gas properties. The obtained results show that, while the use of R134a and R1234yf provides the best efficiency of all the working fluids under investigation, the latter is best selected for its comparatively low global warming effects.

16 March 2020 in International Journal of Fluid Power
Verified
Journal Article
Closed access
PDF file
EEEssam Elsaed
Essam Elsaed
MAMohamed Abdelaziz
Mohamed Abdelaziz
NMNabil Mahmoud
Nabil Mahmoud
A unique method of improving energy efficiency in fluid power systems is called digital flow control. In this paper, binary coding control is utilized. Although this scheme is characterized by a small package size and low energy consumption, it is influenced by higher pressure peaks and larger transient uncertainty than are other coding schemes, e.g., Fibonacci coding and pulse number modulation, consequently resulting in poor tracking accuracy. This issue can be solved by introducing a delay in the signal opening/ closing of the previous or subsequent valve, thus providing sufficient time for state alteration and valve processes. In a metering-in velocity control circuit, a feedforward neural network controller was used to create artificial delays according to the pressure difference over the digital flow control unit (DFCU) valves. The delayed signal samples fed to the controller were acquired through the genetic algorithm method, and the analysis was performed with MATLAB software.

1 January 2020 in Journal of Al-Azhar University Engineering Sector
Verified
Journal Article
Open access
PDF file
MSMostafa Abdellah Sayed
Mostafa Abdellah Sayed
AHA. M. T. A. Eldein Hussin
A. M. T. A. Eldein Hussin
WAW. Aboelsoud
W. Aboelsoud
NMNabil Mahmoud
Nabil Mahmoud
For the purpose of enhancing the heat transfer performance of cross-flow heat exchangers,extended surfaces are attached on the gas side, thus increasing the surface area and lowering theconvection heat transfer resistance. Experiments have been carried out to evaluate theperformance of four modules of cross flow heat exchangers. All heat exchanger modules have tenequally-spaced copper tubes in vertical alignment.A sheet of copper woven wire mesh wascorrugated in the form of rectangular-shape. Then, it was press-fitted to the tube to form a wiremesh heat exchanger. One module has bare copper tubes. The other three wire mesh heatexchanger modules were manufactured with 2, 3, and 4 mm wire mesh layer-to-layer spacings forcomparison purposes. Copper tubes containing hot distilled water flow of the heat exchangermodules, were subjected to external air flow forced convection heat transfer into an air ducthaving a 20 cm x 20 cm cross sectional inside area. The pressure drop in the air stream and thetemperature of the hot water inlet and outlet were recorded. The significance of this experimentalwork is the use of a low cost and commercially available woven wire mesh sheet as extended heattransfer surface. A comparison was made between the results of this study and results of otherenhanced cross-flow heat exchangers, obtained from open literature. Results showed anenhancement of the Nusselt number for all the wire mesh finned modules as compared to that ofthe bare module. Volumetric heat transfer coefficient results showed, an average increase of113.9%, 91.5%, and 81.4% in the 3, 4, and 2 mm wire mesh heat exchangers, respectively, ascompared to the bare heat exchanger module. من أجل تحسین أداء المبادل الحراری (سائل-ھواء)، یتم استخدام الأسطح الممتدة و التى عادة ما توضع ناحیة سریان الغاز وذلک لزیادة مساحة السطح لا نتقال الحرارة وبالتالی یتم تقلیل مقاومة انتقال الحرارة على السطح الخارجی. تم عمل التجاربلتقییم أداء عدد أربعة نماذج من المبادلات الحراریة. کل المبادلات الحراریة مصنعة و تتکون من عشرة مواسیر نحاسیة وعلىمسافات متساویة من بعضھا و موضوعة فى ترتیب رأسى. تم إستخدام شبک سلک نحاسى منعرج على شکل تعرجات مستطیلة لزیادة مساحة إنتقال الحرارةو تم توصیلھ مع مواسیر المیاه الساخنة عن طریق الشحط. أحد نماذج المبادلات الحراریة الأربعة یتکون من مواسیر المیاهالساخنة فقط بدون إستخدام شبک السلک النحاسى أما الثلاثة نماذج الأخرى فتم ترکیب شبک سلک نحاسى على المواسیر بشکلتعرجات مستطیلة و بمسافات مختلفة...