Xi Wang

Dr. Xi Wang


Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Materials Research Express
Verified
Journal Article
Open access
PDF file
WYWeiguang Yang
Weiguang Yang
XWXi Wang
Xi Wang
HZHai Zhou
Hai Zhou
TZTi Zhou
Ti Zhou
The lower surface hardness limits the further application of 316 L stainless steel. In this study, selective laser melting (SLM)/laser metal deposition (LMD) composite additive manufacturing technology was used to prepare five kinds of 316L-nano-TiC cermet strengthening layers on the surface of 316L stainless steel, and to study the effect of nano-TiC particle content on the microstructure and the influence of microhardness. Use Laser microscope, scanning electron microscope (SEM), X-ray diffractometer (XRD) to analyze the structure, element distribution and phase composition of the strengthening layer. The hardness of the strengthened layer was analyzed using a Vickers micro-hardness tester. The study found that the composite SLM/LMD formed samples changed continuously from LMD forming to SLM forming, showing good metallurgical bonding. Diffusion of TiC particles was observed in the SLM strengthening layer, and TiC phase was detected in the strengthening layer. Compared with the 316L matrix, the microhardness of the strengthened layer is significantly improved. When 50 wt% TiC is added, the average hardness of the strengthened layer is 1.9 times that of the 316L matrix, and the highest is 408.9 HV. The results of this study show that the strengthening layer manufactured by composite additive materials can effectively improve the hardness of the 316L stainless steel matrix. As the content of nano-TiC in the preset powder increases, the microhardness of the strengthening layer first increases and then decreases, and the hardness of the 50wt% TiC strengthening layer is the highest. There are distributed nano-TiC particles in the structure of the strengthening layer, and the distribution of nano-TiC particles in the 50wt% TiC strengthening layer is more uniform than other samples. This research provides a new reference for the strengthening of 316L stainless steel through SLM/LMD composite additive manufacturing technology and the addition of nano-TiC particles.

1 June 2010 in Chinese Physics Letters
Verified
Journal Article
Closed access
PDF file
JRJili Rong
Jili Rong
XWXi Wang
Xi Wang
MCMao-Sheng Cao
Mao-Sheng Cao
Dawei WangDawei Wang
Dawei Wang
WZWei Zhou
Wei Zhou
TXTianfu Xu
Tianfu Xu
Dynamic tensile properties of glass-fiber polymer composites embedded with ZnO nanowhiskers are investigated by a split Hopkinson tensile bar. The stress-strain curves, ultimate strength, failure strain and elastic modulus are obtained and the failure mechanism of the composites is investigated by the macroscopic and microscopic observation of fractured specimens. The strain rate effect on the mechanical behavior is discussed and a constitutive model is derived by simulating the experimental data. The experimental results show that the materials have an obvious non-linear constitutive relation and strain rate strengthening effect. The composites with ZnO nanowhiskers under dynamic loading have various failure modes and better mechanical properties.

23 January 2024 in Journal of Materials Research and Technology
Verified
Journal Article
Open access
XWXi Wang
Xi Wang
HTHaodong Tian
Haodong Tian
YYYuzhen Yu
Yuzhen Yu
SLShuangyu Liu
Shuangyu Liu
HLHe Liu
He Liu
HGHanpeng Gao
Hanpeng Gao

2 November 2023 in Materials
Verified
Journal Article
Open access
PDF file
HLHe Liu
He Liu
YYYuzhen Yu
Yuzhen Yu
XWXi Wang
Xi Wang
HGHanpeng Gao
Hanpeng Gao
JZJinku Zhao
Jinku Zhao
HWHao Wang
Hao Wang
Laser cladding was used to prepare CoCrNi-xTiC-xTiB2 (x = 0, 5, 15 wt.%) composite coatings on 316L stainless steel. Then, ceramic mass fraction effects on the microstructure and properties were investigated. Results show viable metallurgical bonding between the coating and the substrate, with no apparent pores or cracks. The addition of ceramics transformed the coating phase from a single-phase face-centered cubic (FCC) to a multi-phase FCC+TiC+TiB2. TiC and TiB2 increased the hardness of the CoCrNi-xTiC-xTiB2 coating from 209.71 HV to 494.77 HV by grain refinement and diffusion strengthening. The substrate wear loss was 0.0088 g, whereas the CoCrNi-xTiC-xTiB2 (x = 15%) coating wear loss was only 0.0012 g. Moreover, the overall wear mechanism of the coating was changed: the substrate wear mechanism was used for abrasive wear, adhesive wear and fatigue wear, and the coating with the addition of 15 wt.% nano-TiC and 15 wt.% micro-TiB2 was the wear mechanism for pitting fatigue wear.

26 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
YYYuzhen Yu
Yuzhen Yu
WDWeikang Ding Weikang Ding
Weikang Ding Weikang Ding
XWXi Wang
Xi Wang
DMDonglu Mo
Donglu Mo
FCFan Chen
Fan Chen
65 Mn is a high-quality carbon structural steel that exhibits excellent mechanical properties and machinability. It finds broad applications in machinery manufacturing, agricultural tools, and mining equipment, and is commonly used for producing mechanical parts, springs, and cutting tools. Fe901 is an iron-based alloy that exhibits excellent hardness, structural stability, and wear resistance. It is widely used in surface engineering applications, especially laser cladding, due to its ability to form dense and crack-free metallurgical coatings. To enhance the surface hardness and wear resistance of 65 Mn steel, this study employs a laser melting process to deposit a multi-layer Fe901 alloy coating. The phase composition, microstructure, microhardness, and wear resistance of the coatings are investigated using X-ray diffraction (XRD), optical microscopy, scanning electron microscopy (SEM), Vickers hardness testing, and friction-wear testing. The results show that the coatings are dense and uniform, without visible defects. The main phases in the coating include solid solution, carbides, and α-phase. The microstructure comprises dendritic, columnar, and equiaxed crystals. The microhardness of the cladding layer increases significantly, with the multilayer coating reaching 3.59 times the hardness of the 65 Mn substrate. The coatings exhibit stable and relatively low friction coefficients ranging from 0.38 to 0.58. Under identical testing conditions, the wear resistance of the coating surpasses that of the substrate, and the multilayer coating shows better wear performance than the single-layer one.

1 March 2023 in Materials Research Express
Verified
Journal Article
Open access
HLHe Liu
He Liu
XWXi Wang
Xi Wang
YYYuzhen Yu
Yuzhen Yu
WYWeiguang Yang
Weiguang Yang
HGHanpeng Gao
Hanpeng Gao
Four metal-ceramic composite coatings were prepared by laser cladding (LC) using Hastelloy C-276, nano-TiC and micro-TiB2 as raw materials to improve the surface properties and extend the service life of 316L stainless steel. The microstructure and mechanical properties were analyzed by metallographic microscopy, scanning electron microscopy (SEM), x-ray diffraction (XRD), Vickers hardness experiments, and friction and wear testing. The TiC and TiB2 phases were detected in the coating, exhibiting homogenous distribution as their content increased. As a result, the strengthening effect of the coating was enhanced, improving microhardness relative to that of the 316L substrate. The wear test revealed that the Hastelloy coating exhibited poor wear resistance, but the addition of TiC and TiB2 particles improved the wear resistance by reducing the wear rate. The lowest average coefficient and wear rate were attained at 50% and 70% ceramic contents, respectively. However, abundant hard particles on the surface easily fell off during the wear, which further impeded the surface degradation and increased the friction coefficient.