Ti Zhou

Ti Zhou

Auto-generated profile, based on publicly available information

Ti Zhou

Weihai Institute of Bionics, Jilin University, No. 5988 Renmin Street, Changchun 130025, People’s Republic of China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Materials Research Express
Verified
Journal Article
Open access
PDF file
WYWeiguang Yang
Weiguang Yang
XWXi Wang
Xi Wang
HZHai Zhou
Hai Zhou
TZTi Zhou
Ti Zhou
The lower surface hardness limits the further application of 316 L stainless steel. In this study, selective laser melting (SLM)/laser metal deposition (LMD) composite additive manufacturing technology was used to prepare five kinds of 316L-nano-TiC cermet strengthening layers on the surface of 316L stainless steel, and to study the effect of nano-TiC particle content on the microstructure and the influence of microhardness. Use Laser microscope, scanning electron microscope (SEM), X-ray diffractometer (XRD) to analyze the structure, element distribution and phase composition of the strengthening layer. The hardness of the strengthened layer was analyzed using a Vickers micro-hardness tester. The study found that the composite SLM/LMD formed samples changed continuously from LMD forming to SLM forming, showing good metallurgical bonding. Diffusion of TiC particles was observed in the SLM strengthening layer, and TiC phase was detected in the strengthening layer. Compared with the 316L matrix, the microhardness of the strengthened layer is significantly improved. When 50 wt% TiC is added, the average hardness of the strengthened layer is 1.9 times that of the 316L matrix, and the highest is 408.9 HV. The results of this study show that the strengthening layer manufactured by composite additive materials can effectively improve the hardness of the 316L stainless steel matrix. As the content of nano-TiC in the preset powder increases, the microhardness of the strengthening layer first increases and then decreases, and the hardness of the 50wt% TiC strengthening layer is the highest. There are distributed nano-TiC particles in the structure of the strengthening layer, and the distribution of nano-TiC particles in the 50wt% TiC strengthening layer is more uniform than other samples. This research provides a new reference for the strengthening of 316L stainless steel through SLM/LMD composite additive manufacturing technology and the addition of nano-TiC particles.

1 August 2022 in Materials Research Express
Verified
Journal Article
Open access
XWXi Wang
Xi Wang
WYWeiguang Yang
Weiguang Yang
TZTi Zhou
Ti Zhou
HZHai Zhou
Hai Zhou
HLHe Liu
He Liu
Alloy steel components can be subjected to serious damage from a variety of conditions during the industrial production procedures, such as wear and fracture failure. Therefore, the preparation of gradient-reinforced layers on the surface of the alloy steel was considered an effective technique to improve the performance. Along these lines, a 40Cr alloy steel, which was commonly used in industry, was systematically investigated in this work. The nano TiC ceramic material was selected in the hard phase. In this work, continuous-wave laser was used to fabricate gradient reinforced layers, which provided a technical reference for the development of protective reinforcement layers for alloy steels with excellent mechanical properties. A dense structure was formed inside the nano TiC gradient reinforced layer, which has a lower friction coefficient (0.25) and wear loss weight (23 mg). The height of the surface material loss under a heavy load wear environment (187 μm) was lower than that of a bare 40Cr alloy steel sample (1116 μm). The impact energy of the nano TiC gradient reinforced layer (75.27 J cm−2) was higher than that of a bare 40Cr alloy steel sample (15.25 J cm−2). Both the wear behavior and impact toughness strengthening mechanism of the nano TiC gradient reinforced layer were revealed.