This study investigates the effects of deionized water, seawater, and solutions with various concentrations (5% and 10% by mass) of HCl and NaOH on the physical and mechanical properties of glass fiber reinforced polymers (GFRPs) through aging tests at 20 °C, 50 °C, and 80 °C. The tensile properties of GFRP were assessed by tensile testing at room temperature, and the strain during the tensile process was observed using digital image correlation. Additionally, the degradation mechanism was analyzed using scanning electron microscopy, and long-term tensile properties were predicted based on the Arrhenius model. The results indicated that the tensile strength of the GFRP decreased by 22%, 71%, and 87% after 56 d of exposure to 5% NaOH solutions at 20 °C, 50 °C, and 80 °C, respectively. The alkaline solutions had a more severe effect on the GFRP than deionized water, seawater, and acidic solutions. The experimental values and Arrhenius model predictions were found to be in good agreement with each other.
Assessing the current condition of protective organic coatings on steel structures is an important but challenging task, particularly when it comes to complex structures located in harsh environments. Near-infrared (NIR) spectroscopy is a rapid, low-cost, and nondestructive analytical technique with applications ranging from agriculture, food, and remote sensing to pharmaceuticals. In this study, an objective and reliable NIR-based technique is proposed for the accurate distinction between different coating conditions during their degradation process. In addition, a state-of-the-art deep learning method using a one-dimensional convolutional neural network (1-D CNN) is explored to automatically extract features from the spectrum. The characteristics of the spectrum show a downward trend over the entire wavenumber period, and two major absorption peaks were observed around 5250 and 4400 cm−1. The experimental results indicate that the proposed deep network structure can powerfully extract the complex characteristics inside the spectrum, and the classification accuracy of the training and testing data was 99.84% and 95.23%, respectively, which suggests that NIR spectroscopy coupled with a deep learning algorithm could be used for the rapid and accurate inspection of steel coatings.