Enterosorbents are widely-used materials for human body detoxification, which function by immobilizing and eliminating endogenous and exogenous toxins. Here, activated carbons, obtained from the lignocellulosic raw vegetal materials of indigenous provenance, have been studied. Walnut shell and wood from local species of nuts and apple-trees were carbonized, and further activated at high temperatures with water vapors in a rotary kiln. A second activation was carried out, in a fluidized bed reactor, but for shorter times. The textural properties of the samples were determined from the adsorption isotherms of nitrogen at 77 K, allowing the obtaining of highly mesoporous materials, while the adsorption capacity permitted an essential rise of six to seven times in the maximal adsorption values of the metabolites, which was determined by the reactivation process. A kinetic study of vitamin B12 and creatinine immobilization was performed, the optimal immobilization time for the apple-tree wood reactivated carbons being 2 times longer than for those originating from walnut shells. An additional investigation was also performed in specific conditions that simulate the real environment of immobilization: the temperature of a febrile human body (at the temperature T = 38 °C) and the characteristic acidity of the urinary tract and stomach (at the pH of 5.68 and 2.53, respectively). The activated carbonic adsorbents studied here, together with the results of the immobilization studies, show that these procedures can conduct a good incorporation of some endogenous metabolic products, such as vitamin B12 and creatinine, therefore presenting a good opportunity for their use as forthcoming commercial enterosorbents.
In this study, activated carbons derived from walnut shells (CA-N) and apple wood (CA-M) were used as adsorbents to remove cobalt(II) and strontium(II) ions from aqueous solutions. The novel materials were obtained using nitric acid (CA-Mox) and nitric acid/urea mixture (CA-Mox-u, CA-Nox-u) as oxidizing agents. The physical–chemical characteristics of activated carbons were determined from nitrogen sorption isotherms, SEM-EDX, FTIR, pH metric titrations, the Boehm titration method and elemental analysis. The results of batch experiments indicate that maximum adsorption can be achieved in broad pH ranges: 4–8 for Co(II) and 4–10 for Sr(II). The maximum adsorption capacities of Co(II) and Sr(II) on oxidized activated carbons at pH = 4 are: CA-Mox, 0.085 and 0.076 mmol/g; CA-Mox-u, 0.056 and 0.041 mmol/g; and CA-Nox-u, 0.041 and 0.034 mmol/g, respectively. The mathematical models (pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models, and Langmuir, Freundlich, Dubinin–Radushkevich, and Temkin–Pyzhev isotherm models) were used to explain the adsorption kinetics, to study the adsorption mechanism and predict maximum adsorption capacity of the adsorbents. The adsorption mechanisms of toxic metal ions on activated carbons were proposed.
Silica-Enoxil nanobiocomposites with 13 %w of Enoxil were prepared either by mechanical mixing of corresponding powders or by sorptive modification of fumed silica powder with aqueous Enoxil solution under fluidized bed conditions. The interaction of fumed silica with Enoxil and the properties of silica-Enoxil composites have been investigated using IR spectroscopy, thermogravimetric analysis, and quantum chemistry methods, as well as by means of water absorption, Enoxil desorption, and 2,2-diphenyl-1-picrylhydrazyl (DPPH) test. It has been shown that the main biomolecules of Enoxil composition interact with silica involving their hydroxyl groups and surface silanol groups. The water absorption of silica-Enoxil nanocomposites was found to be less than that for the individual components. The Enoxil biomolecules are readily and completely desorbed from silica surface into water, and the antioxidant activity of desorbed Enoxil is practically the same as that for the just dissolved one.
4 September 2018 in Journal of Thermal Analysis and Calorimetry
This paper presents the results of scientific research on the structural parameters and the adsorption capacity of activated carbon obtained from apricot kernels (AC-A) in a fluidized layer. The obtained results highlight the fact that the described procedure allows obtaining a mesoporous carbon adsorbent with increased adsorption capacities (SBET = 1424 m2/g) and with quality indices corresponding to the requirements of the carbon enterosorbents imposed by the European Pharmacopoeia Monograph. Adsorption kinetics studies of the bacteria Bacillus subtilis and Bacillus cereus have shown that the time to establish the adsorption equilibrium is 75–90 min. The adsorption of the mentioned bacteria on the carbon enterosorbent AC-A was studied depending on the temperature (26 and 36 °C) and pH of the solution (1.97–4.05). Scanning Electron Microscopy (SEM) showed that the immobilization of bacteria takes place on the outer surface of the carbon adsorbent due to the fact that the geometric dimensions of the bacteria are often larger than the macro diameter of the activated carbon pores. FTIR investigations also indicated the presence of bacteria on the surface of the activated carbon.
Microwave-activated carbons from walnut shells (ACMW) were impregnated with Ag and Se nanoparticles and with the Enoxil biologically active preparation, and the microbiological properties of the obtained composites were studied. To increase the functionality of the adsorbent, the activated carbon was oxidized with ozone, resulting in ACMWO containing aliphatic and aromatic carboxylic groups. There was a considerable decrease in the specific surface of the activated carbon after the oxidation process. Nitrogen adsorption was used to determine the structural parameters of the activated carbons. A simultaneous thermal analysis was used to study the thermal behavior of intact and oxidized activated carbons. Infrared spectroscopy was applied to analyze the surface chemistry of the adsorbents. The microbiological activity of the activated carbons was studied using Escherichia coli bacteria and Candida albicans fungi. The kinetic study of the microbiological activity allowed the estimation of the bactericidal/fungicidal action time of the activated carbons.