The progress of the textile industry has led to a severe increase in the discharge of colored effluents, polluted with dyes and metal ions (non-biodegradable, carcinogenic to humans and environmental hazards). The implementation of effective methodologies and materials for the treatment of wastewater has become an urgent requirement. The present work describes the application of two samples of mineral materials—Ghidirim diatomite and modified diatomite—as adsorbents for the removal of dyes—Acid Blue 350, Methylene Blue, Basic Red 2—and of metal ions—copper, zinc, and lead—from aqueous solutions. In order to determine the optimal working conditions by which to ensure maximum removal efficiency, the influence of the nature and amount of the sorbent, the initial concentration of pollutant, and the temperature were studied. Working under normal conditions (room temperature, solution pH) efficiencies greater than 80% were obtained for the removal of dyes and metal ions. The adsorption fitted well with the pseudo-second order kinetic model, and the maximum adsorption capacities were determined from the Langmuir isotherm model. The adsorption of investigated pollutants is an endothermic and spontaneous process. The results indicate that Ghidirim diatomite and modified diatomite have potential applications in water purification management, providing high removal efficiency of both dyes and metal ions.
In this study, activated carbons derived from walnut shells (CA-N) and apple wood (CA-M) were used as adsorbents to remove cobalt(II) and strontium(II) ions from aqueous solutions. The novel materials were obtained using nitric acid (CA-Mox) and nitric acid/urea mixture (CA-Mox-u, CA-Nox-u) as oxidizing agents. The physical–chemical characteristics of activated carbons were determined from nitrogen sorption isotherms, SEM-EDX, FTIR, pH metric titrations, the Boehm titration method and elemental analysis. The results of batch experiments indicate that maximum adsorption can be achieved in broad pH ranges: 4–8 for Co(II) and 4–10 for Sr(II). The maximum adsorption capacities of Co(II) and Sr(II) on oxidized activated carbons at pH = 4 are: CA-Mox, 0.085 and 0.076 mmol/g; CA-Mox-u, 0.056 and 0.041 mmol/g; and CA-Nox-u, 0.041 and 0.034 mmol/g, respectively. The mathematical models (pseudo-first-order, pseudo-second-order and intraparticle diffusion kinetic models, and Langmuir, Freundlich, Dubinin–Radushkevich, and Temkin–Pyzhev isotherm models) were used to explain the adsorption kinetics, to study the adsorption mechanism and predict maximum adsorption capacity of the adsorbents. The adsorption mechanisms of toxic metal ions on activated carbons were proposed.