High-entropy Al_xCoCrFe_2.7MoNi (x = 0, 0.5, 1.0, 1.5, 2.0) alloy coatings were prepared on pure iron by laser cladding. The effects of Al content on the microstructure, hardness, wear resistance and corrosion resistance of the coatings were studied. The results showed that the crystal phases of the Al_xCoCrFe_2.7MoNi coatings changed from Mo-rich BCC1 + FCC to (Al, Ni)-rich BCC2 + Mo-rich BCC1 when x increased from 0 to 0.5, and the phase changed to an (Al, Ni)-rich BCC2 + (Mo, Cr)-rich σ phase as x increased further. The hardness of the coatings increased as the Al content increased. The Al_2.0CoCrFe_2.7MoNi coating exhibit best wear resistance. Addition of Al increased the corrosion potential in a 3.5 wt.% NaCl solution, and the coating with x = 1.0 exhibited the highest corrosion resistance.

A WC-particle-reinforced nickel-based alloy surfacing layer was fabricated on 42CrMo ultra-high-strength steel. The microstructure and the mechanical and impact-damage behaviors of the surfacing layers at the evaluated temperatures were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX) and the Vickers hardness tester. Results showed that these WC particles gradually changed from elongated and crisscross needle-like phases to blocks with the increase in impact temperature. Numerous carbide phases (e.g., (Cr,Ni,Fe)₂₃C₆) and γ-Ni phases were formed in the substrate matrix. The surfacing layer showed a typical brittle fracture, and the impact energy decreased with the increase in temperature. Moreover, the surfacing layer showed a clear quasi-cleavage fracture morphology without dimples after a 600 °C impact test but exhibited a mixture of dimple fractures and cleavage fractures after the 200 °C and 400 °C impact tests. The Vickers fracture toughness test showed that the average hardness of the surfacing layer after a 600 °C impact test was 383 HV_1.0, which is about 0.8 times that after the 200 °C impact test. In addition, the WC particles in the surfacing layer after the 600 °C impact test showed the highest fracture toughness, but the corresponding Ni40A binder phase possessed the lowest fracture toughness.

As materials science continues to advance, the correlation between microstructure and macroscopic properties has garnered growing interest for optimizing and predicting material performance under various operating conditions. The phase-field method has emerged as a crucial tool for investigating the interplay between microstructural characteristics and internal material properties. In this study, we propose a phase-field approach to couple two-phase growth with stress–strain elastic energy at the mesoscale, enabling the simulation of local stress effects on the solidified structure during the plasma cladding of WC particles and nickel-based alloys. This model offers a more precise prediction of microstructural evolution influenced by stress. Initially, the phase field of WC-Ni binary alloys was modeled, followed by simulations of actual local stress conditions and their impacts on WC particles and nickel-based alloys with ProCAST and finite element analysis software. The results indicate that increased stress reduces grain boundary migration, decelerates WC particle dissolution and diffusion, and diminishes the formation of reaction layers and Ostwald ripening. Furthermore, experimental validation corroborated that the model’s predictions were consistent with the observed microstructural evolution of WC particles and nickel-based alloy composites.