In this work, a confined-doped fiber with the core/inner-cladding diameter of 40/250 μm and a relative doping ratio of 0.75 is fabricated through a modified chemical vapor deposition method combined with the chelate gas deposition technique, and subsequently applied in a tandem-pumped fiber amplifier for high-power operation and transverse mode instability (TMI) mitigation. Notably, the impacts of the seed laser power and mode purity are preliminarily investigated through comparative experiments. It is found that the TMI threshold could be significantly affected by the seed laser mode purity. The possible mechanism behind this phenomenon is proposed and revealed through comprehensive comparative experiments and theoretical analysis. Finally, a maximum output power of 7.49 kW is obtained with the beam quality factor of approximately 1.83, which is the highest output power ever reported in a forward tandem-pumped confined-doped fiber amplifier. This work could provide a good reference and practical solution to improve the TMI threshold and realize high-power high-brightness fiber lasers.
Transverse mode instability (TMI) has been recognized as onse of the primary limiting factors for the average power scaling of high-brightness fiber lasers. In this work, a static model of the TMI effect based on stimulated thermal Rayleigh scattering (STRS) is established while considering the four-wave mixing (FWM) effect. The focus of the model is to theoretically investigate the TMI phenomenon and threshold power dominated by FWM. The gain saturation effect and fiber laser system parameters, such as seed power, pumping direction, and core numerical aperture, which have not been considered in the previous perturbation theory model, are also investigated. This work will enrich the perturbation theory model and extend its application scope in TMI mitigation strategies, providing guidance for understanding and suppressing TMI.
26 September 2025 in High Power Laser Science and Engineering
In this study, we present a low-numerical-aperture (NA) confined-doped fiber architecture that synergistically mitigates transverse mode instability (TMI) through combined optical waveguide engineering and spatially tailored gain distribution. The individual and combined benefits of low-NA fiber design and the confined-doped fiber design strategy on TMI mitigation are numerically investigated. Building upon these theoretical analyses, a self-developed fiber, featuring a core/cladding diameter of approximately 26/400 μm, a core NA of approximately 0.045 and a core doping ratio of approximately 75%, is fabricated. Further experimental validation in a master oscillator power amplifier demonstrates 6.74 kW output power with near-single-mode ( M ${}^2\sim$ 1.49) beam quality, validating the design’s efficacy. This study establishes a novel fiber design paradigm that concurrently addresses TMI mitigation, beam quality maintenance and power scalability, offering a viable pathway toward robust high-power fiber laser sources with near-diffraction-limited beam quality.
To mitigate the limitations of stimulated Raman scattering (SRS) associated with low dopant concentrations in low numerical-aperture (NA) fibers, this study proposes a central refractive index (RI) dip design for low-NA fibers to further increase the effective mode area (MFA). Through simulations of mode-field characteristics, bending-induced distortion, and bending loss, optimal dip parameters were determined. The simulations demonstrate improved transverse mode instability (TMI) and SRS thresholds in a forward tandem-pumped amplifier using this central dip fiber (CDF). Guided by these findings, a low-NA fiber with an ultra-low central dip was fabricated. Experimentally, under forward tandem pumping and optimized coiling, the amplifier achieved a 5.6 kW output with M 2 < 1.4, demonstrating significant enhancement in both SRS and TMI thresholds by using the CDF.
Transverse mode instability (TMI) significantly limits the power scaling of ytterbium-doped fiber lasers. In this Letter, what we believe to be a novel TMI mitigation strategy is proposed and demonstrated in a bidirectional output fiber laser. On the basis of the continuous wave (CW) pump, integrating a quasi-continuous wave (QCW) pump can effectively improve the TMI threshold of the system. In the experiment, a QCW pump with a repetition rate of 1 kHz and a duty cycle of 10% was injected into a CW-pumped fiber laser oscillator, which successfully broke the power limit and alleviated the beam quality degradation. Moreover, when applying a pump modulation depth of approximately 68%, the TMI threshold was notably increased from 624 W in the free-running condition to 1093 W at end B, which is a 469 W (75%) improvement. At this time, the beam quality factor M2 at end B is approximately 1.48, and the stimulated Raman scattering suppression ratio is about 28 dB. Compared to conventional TMI mitigation methods, this approach provides active control in the time domain of fiber lasers, without compromising the optical structures, thereby effectively mitigating TMI and offering broad application prospects.