5 March 2025 in IEEE Photonics Journal
The power scaling of tandem pumped ytterbium-doped fiber lasers (YDFLs) is mainly limited by the nonlinear effect such as the stimulated Raman scattering (SRS). Applying a kind of YDF featuring a large mode field area (LMA) and few guided modes is one of the effective methods to improve the SRS threshold while achieving mode control. With the benefits of small V values, few guided modes and LMA, low-numerical aperture (NA) fibers have potential for effective mode control and high SRS threshold. In this contribution, a low-NA YDF with a core/ inner cladding diameter of 40/250 μm and core NA∼0.051 is fabricated for high power tandem pumped fiber laser. Compared with the conventional YDF, the low-NA fiber amplifier reaches a maximum output power of 7.1 kW with beam quality M2∼2.3 using a forward tandem pumping scheme, providing significant advantages of improving beam quality and transverse mode instability (TMI) threshold. This work indicates the great potential of low-NA fibers applied in tandem-pumped fiber lasers for high-power laser systems requiring further power scaling and excellent beam quality, such as precision industrial machining.
7 November 2025 in Optics Express
To mitigate the limitations of stimulated Raman scattering (SRS) associated with low dopant concentrations in low numerical-aperture (NA) fibers, this study proposes a central refractive index (RI) dip design for low-NA fibers to further increase the effective mode area (MFA). Through simulations of mode-field characteristics, bending-induced distortion, and bending loss, optimal dip parameters were determined. The simulations demonstrate improved transverse mode instability (TMI) and SRS thresholds in a forward tandem-pumped amplifier using this central dip fiber (CDF). Guided by these findings, a low-NA fiber with an ultra-low central dip was fabricated. Experimentally, under forward tandem pumping and optimized coiling, the amplifier achieved a 5.6 kW output with M 2 < 1.4, demonstrating significant enhancement in both SRS and TMI thresholds by using the CDF.
29 July 2026 in High Power Laser Science and Engineering
Fiber bending is a common and practical method to suppress transverse mode instability (TMI) in high-power fiber lasers. Tight bending and loose bending are respectively applicable to fiber lasers with different mode characteristics for TMI suppression. This study analyzes the applicability of the two approaches in conventional and low-numerical aperture (NA) fibers, finding that compared to conventional large-core fibers that predominantly use loose bending to improve TMI threshold, low-NA fibers have the potential to utilize both methods for TMI suppression, although their effectiveness differs significantly. Simulation results reveal that large-core low-NA fibers exhibit a more pronounced effect on TMI suppression by tight bending and there exists an optimal bending range for the maximum TMI threshold. Guided by these findings, a low-NA Yb-doped fiber with core/cladding diameters of 35/250 μm was fabricated and experiments were subsequently conducted. By optimizing bending, an 8-kW single-mode output tandem-pumping fiber amplifier is obtained.