Recently, the demand for portable electronics and embedded systems has increased. These devices need low-power circuit designs because they depend on batteries as an energy resource. Moreover, multi-valued logic (MVL) circuits provide notable improvements over binary circuits in terms of interconnect complexity, chip area, propagation delay, and energy consumption. Therefore, this paper proposes new ternary circuits aiming to lower the power delay product (PDP) to save battery consumption. The proposed designs include new ternary gates [standard ternary inverter (STI) and ternary NAND (TNAND)] and combinational circuits [ternary decoder (TDecoder), ternary half-adder (THA), and ternary multiplier (TMUL)] using carbon nano-tube field-effect transistors (CNFETs). This paper employs the best trade-off between reducing the number of used transistors, utilizing energy-efficient transistor arrangement such as transmission gate, and applying the dual supply voltages (V dd and V dd /2). The five proposed designs are compared with the latest 15 ternary circuits using the HSPICE simulator for different supply voltages, different temperatures, and different frequencies; 180 simulations are performed to prove the efficiency of the proposed designs. The results show the advantage of the proposed designs in reduction over 43% in terms of transistors' count for the ternary decoder and over 88%, 99%, 98%, 86%, and 78% in energy consumption (PDP) for the STI, TNAND, TDecoder, THA, and TMUL, respectively.
The need to deploy wireless sensor networks (WSNs) for real world applications, such as mobile multimedia for healthcare organizations, is increasing spectacularly. However, the energy problem remains one of the core barriers preventing an increase in investment in this technology. In this paper we propose a new technique to resolve the problems due to limited energy sources. Using a quaternary transceiver (in the architecture on a sensor node), instead of a binary one, which will use the amplitude/phase, modulator/demodulator units to increase the number of bits transmitted per symbol. The system will reduce the consumption of energy in the transmission phase due to the increased bits transmitted per symbol. Moreover, a neural network static random access memory (NN-SRAM) implementation in a clustering-based system for energy-constrained wireless sensor networks is proposed. The scheme reduces the total amount of energy consumption in storage and transmissions during the data dissemination process. Through simulation results based on Matlab and Spice software tools, it is shown that the neural network static random access memory implementation in a clustering based system reduces the energy consumption of the entire system by about to 76.99%.
The embedded systems, IoT (Internet of Things) devices, and portable electronic devices spread very quickly recently. Most of them depend on batteries to operate. The target of this work is to decrease energy consumption by (1) using Multiple-valued logic (MVL) that shows notable enhancements regarding energy consumption over binary circuits and (2) using carbon nanotube field-effect transistors (CNFET) that show better performance than CMOS. This work proposes ternary combinational circuits using 32 nm CNFET: Ternary Half Adder (THA) with 36 transistors and Ternary Multiplier (TMUL) with 23 transistors. To reduce energy consumption by utilizing the unary operator of the ternary system and employing two voltage supplies ( $V_{dd}$ and $V_{dd}$ /2). The result of extensive HSPICE simulations regarding PVT (Process, Voltage, and Temperatures) variations and Noise Immunity Curve (NIC) show the improvements of the proposed designs up to 25% in transistors count and up to 98% in energy consumption reductions. Further, increasing the robustness of process variations and the noise tolerance compared to recent similar designs.
Renewable energy solutions are becoming increasingly popular. Photovoltaic (solar) systems are but one example. Maximizing power output from a solar system is desirable to increase efficiency. In order to maximize power output from solar panels, one needs to keep the panels aligned with the sun. As such, a means of tracking the sun is required. This is definitely a more cost effective solution than purchasing additional solar panels. It has been estimated that the yield from solar panels can be increased by 30 to 60 percent by utilizing a tracking system instead of a stationary array. In this paper, a prototype for a microcontroller-based multi-function solar tracking system is described, which will keep the solar panels aligned with the sun in order to maximize efficiency. The maximum power point tracking (MPPT) data can be transmitted in real time to other solar systems in need of this data.
This paper presents a Smart Medicine Dispenser (SMD) prototype. The main purpose of this system is to help the patients, primarily seniors, take their medications on time in an easy way without the possibility of missing pills, also reduce the risk of over or under dosing accidentally. Not taking medications correctly can have serious consequences such as delayed recovery, illness and even death. The smart medicine dispenser (SMD) could solve such problems by informing and alerting the patients to take the appropriate dose at the right time. Also, it provides direct communication between the patients and the caregivers as it will immediately notify the caregiver in case the patient missed his/her pill. In addition, SMD provides the user with a touch interface available as an application on their smartphone which will allow them to remotely manage and control pill schedules and usage data.
In large apartment complexes, fraternities, or even for an owner having many keys for each and every apartment, car, or gate he owns, maintaining entry to authorized personnel only is a problem. Besides the costs involved in fabrication, duplication, and distribution of keys, there are security problems in case of lost keys. In this paper an innovative lock system prototype using today's technologies will be presented. The novelty of this prototype relies on the fact that using new technologies along with old ones will result in a smart and more efficient. We propose a smart digital door lock system for any lock system. A digital door lock system is any equipment that uses the digital information such as a secret code instead of the legacy key system. In our proposed system, a Central Control module is embedded in the door itself, this is required to prevent additional complications and more robust mechanism for the door as a whole. Technically, this system embeds itself in the Local Area Network of the house. This adds extra security layers and prevents access to the system only through the network. Furthermore, the biggest advantage of the proposed system over existing ones is that it can be easily installed with minimal requirement of infrastructures and planning.