Recently, the demand for portable electronics and embedded systems has increased. These devices need low-power circuit designs because they depend on batteries as an energy resource. Moreover, multi-valued logic (MVL) circuits provide notable improvements over binary circuits in terms of interconnect complexity, chip area, propagation delay, and energy consumption. Therefore, this paper proposes new ternary circuits aiming to lower the power delay product (PDP) to save battery consumption. The proposed designs include new ternary gates [standard ternary inverter (STI) and ternary NAND (TNAND)] and combinational circuits [ternary decoder (TDecoder), ternary half-adder (THA), and ternary multiplier (TMUL)] using carbon nano-tube field-effect transistors (CNFETs). This paper employs the best trade-off between reducing the number of used transistors, utilizing energy-efficient transistor arrangement such as transmission gate, and applying the dual supply voltages (V dd and V dd /2). The five proposed designs are compared with the latest 15 ternary circuits using the HSPICE simulator for different supply voltages, different temperatures, and different frequencies; 180 simulations are performed to prove the efficiency of the proposed designs. The results show the advantage of the proposed designs in reduction over 43% in terms of transistors' count for the ternary decoder and over 88%, 99%, 98%, 86%, and 78% in energy consumption (PDP) for the STI, TNAND, TDecoder, THA, and TMUL, respectively.
The embedded systems, IoT (Internet of Things) devices, and portable electronic devices spread very quickly recently. Most of them depend on batteries to operate. The target of this work is to decrease energy consumption by (1) using Multiple-valued logic (MVL) that shows notable enhancements regarding energy consumption over binary circuits and (2) using carbon nanotube field-effect transistors (CNFET) that show better performance than CMOS. This work proposes ternary combinational circuits using 32 nm CNFET: Ternary Half Adder (THA) with 36 transistors and Ternary Multiplier (TMUL) with 23 transistors. To reduce energy consumption by utilizing the unary operator of the ternary system and employing two voltage supplies ( $V_{dd}$ and $V_{dd}$ /2). The result of extensive HSPICE simulations regarding PVT (Process, Voltage, and Temperatures) variations and Noise Immunity Curve (NIC) show the improvements of the proposed designs up to 25% in transistors count and up to 98% in energy consumption reductions. Further, increasing the robustness of process variations and the noise tolerance compared to recent similar designs.
Multiple-Valued Logic systems present significant improvements in terms of energy consumption over binary logic systems. This paper proposes new ternary combinational digital circuits that reduce energy consumption in low-power nano-scale embedded systems and Internet of Thing (IoT) devices to save their battery consumption. The 32 nm CNTFET-based ternary half adder (THA) and multiplier (TMUL) circuits use novel ternary unary operator circuits and implement two power supplies Vdd and Vdd/2 without using any ternary decoders, basic logic gates, or encoders to minimize the number of used transistors and improve the energy efficiency. Extensive simulations (over 160) of the proposed designs in terms of PVT (Process, Voltage, Temperature) variations, noise effect, and scalability studies, along with several benchmark designs using HSPICE simulator, prove the significance of the proposed circuits to decrease the power-delay product (PDP), improve the robustness to process variations, and the noise tolerance. The obtained results show the superiority of the designs in a reduction between 32% and 74% in transistors count and between 18% and 99% in PDP compared to the most recent works.
The design of the Ternary Full Adders (TFA) employing Carbon Nanotube Field-Effect Transistors (CNFET) has been widely presented in the literature. To obtain the optimal design of these ternary adders, we propose two new different designs, TFA1 with 59 CNFETs and TFA2 with 55 CNFETs, that use unary operator gates with two voltage supplies ( and ) to reduce the transistor count and energy consumption. In addition, this paper proposes two 4-trit Ripple Carry Adders (RCA) based on the two proposed TFA1 and TFA2; we use the HSPICE simulator and 32 nm CNFET to simulate the proposed circuits under different voltages, temperatures, and output loads. The simulation results show the improvements of the designs in a reduction of over 41% in energy consumption (PDP), and over 64% in Energy Delay Product (EDP) compared to the best recent works in the literature.
BCIs and AI converge for enhanced brain-machine interaction. AI optimizes signal processing and control algorithms, fueling applications like movement restoration and mind-driven communication. This comprehensive review underscores AI's vital role in BCIs, tackling translation hurdles and fostering innovation. It explores AI-boosted BCIs for motor control, sensory feedback, and research. Transformative outcomes encompass disability empowerment, performance enhancement, and deeper brain insights. Challenges include quicker training and improved sensor accuracy. This partnership heralds a dynamic future, revolutionizing human-device interaction and advancing neurotech. As AI and neurotechnology advance, BCIs promise impactful transformations, enriching lives, and capabilities.