Takumi Sato

Mr. Takumi Sato

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 March 2021 in Soft Matter
Verified
Journal Article
Closed access
PDF file
TSTakumi Sato
Takumi Sato
YKYusei Kobayashi
Yusei Kobayashi
TMTakenobu Michioka
Takenobu Michioka
NANoriyoshi Arai
Noriyoshi Arai
In this study, a coarse-grained molecular simulation was performed to investigate the morphologies and phase diagrams of self-assembled polymer-tethered nanoparticles (NPs) confined in nanotubes (NTs). Unlike ordinary NPs, polymer-tethered NPs have two distinct characteristic lengths, which are key factors that determine their self-assembly. Herein, two distinct types of NT walls and three types of polymer-tethered NPs were considered: hydrophilic and hydrophobic walls, and hydrophilic, hydrophobic, and Janus surfaces. First, the qualitative phase diagrams of the axial pressure, Pz, versus the ratio of the NT radius to the NP radius, L, were derived. The results revealed that diverse self-assembled morphologies, which are not formed in non-tethered NPs, were observed in the polymer-tethered NPs. For example, three types of ordered structures with different structural characteristic lengths, depending on Pz, were obtained. In addition, the effect of the chemical nature of the polymer-tethered NP surface on the self-assembled morphology confined in NTs was investigated. Clusters of water molecules were formed, particularly in the hydrophobic polymer-tethered NPs, and these clusters caused the structural distortion of the NP. Moreover, in the polymer-tethered NPs with the Janus amphiphilic surface, the hydrophobic and hydrophilic polymer tethered NPs assembled in the axial direction to form an ordered structure, and a double-helix structure was formed at L = 3.0 in the hydrophobic NT. The results of these simulations indicate that the self-assembly behaviours of polymer-tethered NPs can be qualitatively predicted based on the chemical nature of the NT walls and the surface design of the polymer-tethered NP.

9 July 2021 in Journal of Physics: Condensed Matter
Verified
Journal Article
Closed access
TSTakumi Sato
Takumi Sato
YKYusei Kobayashi
Yusei Kobayashi
NANoriyoshi Arai
Noriyoshi Arai
There is a clear relationship between the self-assembling architecture of nanoparticles (NPs) and their physical properties, and they are currently used in a variety of applications, including optical sensors. Polymer-tethered NPs, which are created by grafting polymers onto NPs to control the self-assembly of NPs, have attracted considerable attention. Recent synthetic techniques have made it possible to synthesize a wide variety of polymers and thereby create NPs with many types of surfaces. However, self-assembled structures have not been systematically classified because of the large number of tuning parameters such as the polymer length and graft density. In this study, by using coarse-grained molecular simulation, we investigated the changes in the self-assembled structure of polymer-tethered NP solutions confined in nanotubes due to the chemical properties of polymers. Three types of tethered polymer NP models were examined: homo hydrophilic, diblock hydrophilic–hydrophobic (HI–HO), and diblock hydrophobic–hydrophilic. Under strong confinement, the NPs were dispersed in single file at low axial pressure. As the pressure increased, multilayered lamellar was observed in the HI–HO model. In contrast, under weak confinement, the difference in the pressure at which the phases emerge, depending on the model, was significant. By changing the chemical properties of the grafted polymer, the thermodynamic conditions (the axial pressure in this study) under which the phases appear is altered, although the coordination of NPs remains almost unchanged. Our simulation offers a theoretical guide for controlling the morphologies of self-assembled polymer-tethered NPs, a novel system that may find applications in nanooptical devices or for nanopatterning.

Verified
Journal Article
Open access
PDF file
TSTakumi Sato
Takumi Sato
KEKeiko Esashika
Keiko Esashika
EYEiji Yamamoto
Eiji Yamamoto
TSToshiharu Saiki
Toshiharu Saiki
NANoriyoshi Arai
Noriyoshi Arai
Nanoparticles exhibit diverse self-assembly attributes and are expected to be applicable under unique settings. For instance, biomolecules can be sandwiched between dimer nanoparticles and detected by surface-enhanced Raman scattering. Controlling the gap between extremely close dimers and stably capturing the target molecule in the gap are crucial aspects of this strategy. Therefore, polymer-tethered nanoparticles (PTNPs), which show promise as high-performance materials that exhibit the attractive features of both NPs and polymers, were targeted in this study to achieve stable biomolecule sensing. Using coarse-grained molecular dynamics simulations, the dependence of the PTNP interactions on the length of the grafted polymer, graft density, and coverage ratio of a hydrophobic tether were examined. The results indicated that the smaller the tether length and graft density, the smaller was the distance between the PTNP surfaces (Rsurf). In contrast, Rsurf decreased as the coverage ratio of the hydrophobic surface (ϕ) increased. The sandwiching probability of the sensing target increased in proportion to the coverage ratio. At high ϕ values, the PTNPs aggregated into three or more particles, which hindered their sensing attributes. These results provide fundamental insight into the sensing applications of NPs and demonstrate the usefulness of PTNPs in sensing biomolecules.

8 July 2024 in Physical Review E
Verified
Journal Article
Closed access
PDF file
TSTakumi Sato
Takumi Sato
HTHiroaki Tsujinoue
Hiroaki Tsujinoue
NANoriyoshi Arai
Noriyoshi Arai
KTKazuaki Takahashi
Kazuaki Takahashi
Blue phases (BPs) consist of three-dimensional self-assembled structures formed by a double-twisted columnar arrangement of liquid crystal molecules. Although their unique optical and structural properties render BPs particularly useful for applications such as liquid crystal displays, BPs typically appear in a narrow temperature range between the isotropic and nematic phases. This thermodynamic instability impedes their practical applicability. However, the simulations we present here showed that, in a quasi-one-dimensional system confined to nanospace, a phase equivalent to the BP appears and persists between the nematic and smectic phases. Confinement to a nanotube (NT) with a relatively small radius enables the BP to be maintained over a wide temperature range, whereas for an NT with a relatively larger radius, the BP appears only in a very narrow temperature range between the aforementioned phases. We additionally showed that the pitch of the BP is dependent on and can be controlled by adjusting the radius of the NTs. This finding has significant implications for the potential application of these materials in fields such as photonics and chiral separation technologies.

1 January 2020 in Journal of Structural and Construction Engineering (Transactions of AIJ)
Verified
Journal Article
Open access
PDF file
YIYutaro Ishida
Yutaro Ishida
HSHiroyasu Sakata
Hiroyasu Sakata
YTYuya Takase
Yuya Takase
YMYusuke Maida
Yusuke Maida
TSTakumi Sato
Takumi Sato
MKMasaharu Kubota
Masaharu Kubota
The disk shear-key is a composite shear resistance system composed of a steel disk and an anchor bolt. The disk shear-key has high stiffness and shear strength as compared with a general post-installed anchor. In the previous study, it is suggested that the expected shear strength can not be demonstrate when tensile force acts on the disk shear-key. Therefore, in the current design and construction method for the external seismic retrofitting, the disk shear-keys are placed in the center of the span and it is assumed that the shear force is to be borne on average. Then, for the tensile force due to the eccentric moment, post-installed anchors are placed at both ends of span. In order to make effective use of the disk shear-key, it is necessary to grasp the mechanical behavior under combined stress and arrange it efficiently. Therefore, in this study, the disk shear-key was tested under cyclic shear force along with constant tensile force. In Chapter 2, the outline of the experiment is indicated. The eight specimens were built with various parameters, which is, diameter of the steel disk Rd, embedded length of the anchor bolt le, and tensile force ratio η’. Here, the tensile force ratio is the ratio of the tensile axial force to the tensile strength of the disk shear-key. The experiment results are described in Chapter 3. The shear strength of the specimens in this experiment was less than the ultimate shear strength according to the current evaluation formula. This is considered to be caused by the different loading condition in the vertical direction from the previous experiment. When the vertical stress generated at the joint surface is zero (η’=0), the shear strength of the disk shear-key can be roughly estimated by the design shear strength according to the current design evaluation formula. However, in the range of η’=0 to 0.5 conducted in this experiment, the relative horizontal displacement of joint at maximum shear strength was within 2mm, which is the allowable value of the external seismic retrofitting joints. Also, the relative vertical displacement of joint increases as the tensile force is applied. Furthermore, in the case of application to external seismic retrofitting, the relative vertical displacement becomes large even when no tensile force is applied. It is suggested that the steel disk slips out, and it is believed that the shear resistance decreases due to the strength reduction in the bearing stress area of the concrete. In addition, the curvature of the anchor bolt is maximized at the position near 2da away from the joint surface on the existing side, and the value reaches the yielding region. However, curvatures within the elastic range occur at the other measurement points, and bending deformation hardly occurs at the retrofitting part. In Chapter 4, the shear strength evaluation formula under constant tensile force was constructed. The evaluation formula was modified in consideration of slipping out of the steel disk and the reduction of restraint effect by anchor bolt due to the tensile force. It was evaluated almost accurately with the experimental results.

13 July 2026 in The Journal of Physical Chemistry B
Verified
Journal Article
Closed access
YOYusuke Ono
Yusuke Ono
TSTakumi Sato
Takumi Sato
KYKenji Yasuoka
Kenji Yasuoka
Linyu PengLinyu Peng
Linyu Peng