One of the key enablers of future wireless communications is constituted by massive multiple-input multiple-output (MIMO) systems, which can improve the spectral efficiency by orders of magnitude. In existing massive MIMO systems, however, conventional phased arrays are used for beamforming. This method results in excessive power consumption and high hardware costs. Recently, reconfigurable intelligent surface (RIS) has been considered as one of the revolutionary technologies to enable energy-efficient and smart wireless communications, which is a two-dimensional structure with a large number of passive elements. In this paper, we develop a new type of high-gain yet low-cost RIS that bears 256 elements. The proposed RIS combines the functions of phase shift and radiation together on an electromagnetic surface, where positive intrinsic-negative (PIN) diodes are used to realize 2-bit phase shifting for beamforming. This radical design forms the basis for the world's first wireless communication prototype using RIS having 256 two-bit elements. The prototype consists of modular hardware and flexible software that encompass the following: the hosts for parameter setting and data exchange, the universal software radio peripherals (USRPs) for baseband and radio frequency (RF) signal processing, as well as the RIS for signal transmission and reception. Our performance evaluation confirms the feasibility and efficiency of RISs in wireless communications. We show that, at 2.3 GHz, the proposed RIS can achieve a 21.7 dBi antenna gain. At the millimeter wave (mmWave) frequency, that is, 28.5 GHz, it attains a 19.1 dBi antenna gain. Furthermore, it has been shown that the RIS-based wireless communication prototype developed is capable of significantly reducing the power consumption.

Millimeter wave (MmWave) communications is capable of supporting multi-gigabit wireless access thanks to its abundant spectrum resource. However, severe path loss and high directivity make it vulnerable to blockage events, which can be frequent in indoor and dense urban environments. To address this issue, in this paper, we introduce intelligent reflecting surface (IRS) as a new technology to provide effective reflected paths to enhance the coverage of mmWave signals. In this framework, we study joint active and passive precoding design for IRS-assisted mmWave systems, where multiple IRSs are deployed to assist the data transmission from a base station (BS) to a single-antenna receiver. Our objective is to maximize the received signal power by jointly optimizing the transmit precoding vector at the BS and the phase shift parameters used by IRSs for passive beamforming. Although such an optimization problem is generally non-convex, we show that, by exploiting some important characteristics of mmWave channels, an optimal closed- orm solution can be derived for the single IRS case and a near-optimal analytical solution can be obtained for the multi-IRS case. Our analysis reveals that the received signal power increases quadratically with the number of reflecting elements for both the single IRS and multi-IRS cases. Simulation results are included to verify the optimality and near-optimality of our proposed solutions. Results also show that IRSs can help create effective virtual LOS paths and thus substantially improve robustness against blockages in mmWave communications.

Benefiting from tens of GHz of bandwidth, terahertz (THz) communication has become a promising technology for future 6G network. To deal with the serious propagation loss of THz signals, massive multiple-input multiple-output (MIMO) with hybrid precoding is utilized to generate directional beams with high array gains. However, the standard hybrid precoding architecture based on frequency-independent phase-shifters cannot cope with the beam split effect in THz massive MIMO caused by the large bandwidth and the large number of antennas, where the beams split into different physical directions at different frequencies. The beam split effect will result in a serious array gain loss across the entire bandwidth, which has not been well investigated in THz massive MIMO. In this paper, we first quantify the seriousness of the beam split effect in THz massive MIMO by analyzing the array gain loss it causes. Then, we propose a new precoding architecture called delay-phase precoding (DPP) to mitigate this effect. Specifically, the proposed DPP introduces a time delay network composed of a small number of time delay elements between radio-frequency chains and phase-shifters in the standard hybrid precoding architecture. Unlike frequency-independent phase shifts, the time delay network introduced in the DPP can realize frequency-dependent phase shifts, which can be designed to generate frequency-dependent beams towards the target physical direction across the entire bandwidth. Due to the joint control of delay and phase, the proposed DPP can alleviate the array gain loss caused by the beam split effect. Furthermore, we propose a hardware structure by using true-time-delayers to realize frequency-dependent phase shifts for realizing the concept of DPP. A corresponding precoding algorithm is proposed to realize the precoding design. Theoretical analysis and simulations show that the proposed DPP can mitigate the beam split effect and achieve near-optimal rate with higher energy efficiency.

Terahertz (THz) communications with a frequency band 0.1-10 THz are envisioned as a promising solution to future high-speed wireless communication. Although with tens of gigahertz available bandwidth, THz signals suffer from severe free-spreading loss and molecular-absorption loss, which limit the wireless transmission distance. To compensate for the propagation loss, the ultra-massive multiple-input-multiple-output (UM-MIMO) can be applied to generate a high-gain directional beam by beamforming technologies. In this paper, a review of beamforming technologies for THz UM-MIMO systems is provided. Specifically, we first present the system model of THz UM-MIMO and identify its channel parameters and architecture types. Then, we illustrate the basic principles of beamforming via UM-MIMO and discuss the far-field and near-field assumptions in THz UM-MIMO. Moreover, an important beamforming strategy in THz band, i.e., beam training, is introduced wherein the beam training protocol and codebook design approaches are summarized. The intelligent-reflecting-surface (IRS)-assisted joint beamforming and multi-user beamforming in THz UM-MIMO systems are studied, respectively. The spatial-wideband effect and frequency-wideband effect in the THz beamforming are analyzed and the corresponding solutions are provided. Further, we present the corresponding fabrication techniques and illuminate the emerging applications benefiting from THz beamforming. Open challenges and future research directions on THz UM-MIMO systems are finally highlighted.

Terahertz (THz) communications open a new frontier for the wireless network thanks to their dramatically wider available bandwidth compared to the current micro-wave and forthcoming millimeter-wave communications. However, due to the short length of THz waves, they also suffer from severe path attenuation and poor diffraction. To compensate for the THz-induced propagation loss, this paper proposes to combine two promising techniques, viz., massive multiple input multiple output (MIMO) and intelligent reflecting surface (IRS), in THz multi-user communications, considering their significant beamforming and aperture gains. Nonetheless, channel estimation and low-cost beamforming turn out to be two main obstacles to realizing this combination, due to the passivity of IRS for sending/receiving pilot signals and the large-scale use of expensive RF chains in massive MIMO. In view of these limitations, this paper first develops a cooperative beam training scheme to facilitate the channel estimation with IRS. In particular, we design two different hierarchical codebooks for the proposed training procedure, which are able to balance between the robustness against noise and searching complexity. Based on the training results, we further propose two cost-efficient hybrid beamforming (HB) designs for both single-user and multi-user scenarios, respectively. Simulation results demonstrate that the proposed joint beam training and HB scheme is able to achieve close performance to the optimal fully digital beamforming which is implemented even under perfect channel state information (CSI).

Fluid antennas (FAs) and movable antennas (MAs) have emerged as promising technologies in wireless communications, which offer the flexibility to improve channel conditions by adjusting transmit/receive antenna positions within a spatial region. In this letter, we focus on an MA-enhanced multiple-input single-output (MISO) communication system, aiming to optimize the positions of multiple transmit MAs to maximize the received signal power. Unlike the prior works on continuously searching for the optimal MA positions, we propose to sample the transmit region into discrete points, such that the continuous antenna position optimization problem is transformed to a discrete sampling point selection problem based on the point-wise channel information. However, such a point selection problem is combinatory and challenging to be optimally solved. To tackle this challenge, we ingeniously recast it as an equivalent fixed-hop shortest path problem in graph theory and propose a customized algorithm to solve it optimally in polynomial time. To further reduce the complexity, a linear-time sequential update algorithm is also proposed to obtain a high-quality suboptimal solution. Numerical results demonstrate that the proposed algorithms can yield considerable performance gains over the conventional fixed-position antennas with/without antenna selection.