Ming Zhang

Dr. Ming Zhang

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2017 in Optics Communications
Verified
Journal Article
Closed access
MZMing Zhang
Ming Zhang
JFJiawen Fang
Jiawen Fang
FZFei Zhang
Fei Zhang
JCJunyan Chen
Junyan Chen
HYHonglin Yu
Honglin Yu

17 March 2016 in Optics Express
Verified
Journal Article
Open access
PDF file
FZFei Zhang
Fei Zhang
HYHonglin Yu
Honglin Yu
JFJiawen Fang
Jiawen Fang
MZMing Zhang
Ming Zhang
SCSicheng Chen
Sicheng Chen
JCJunyan Chen
Junyan Chen
We propose a single layer all-dielectric metasurface lens to simultaneously convert and focus an incident linear polarization into a radial beam with high efficiency and high numerical aperture (NA). It shows a better focusing property compared with the linearly polarized metasurface lens for high NA. A tight spot size (0.502λ) is achieved for the NA = 0.94. Additionally, the emergent polarization can in principle be switched flexibly between radially and azimuthally polarized beams by the adjustment of incident polarization direction. It is expected that our scheme may have potential value in microscopy, material processing, medicine, particles accelerating and trapping, and so on.

1 June 2018 in Nanophotonics
Verified
Journal Article
Open access
PDF file
MZMing Zhang
Ming Zhang
FZFei Zhang
Fei Zhang
YOYi Ou
Yi Ou
JCJixiang Cai
Jixiang Cai
HYHonglin Yu
Honglin Yu
Terahertz (THz) absorbers have attracted considerable attention due to their potential applications in high‐resolution imaging systems, sensing, and imaging. However, the limited bandwidth of THz absorbers limits their further applications. Recently, the dispersion management of metasurfaces has become a simple strategy for the bandwidth extension of THz devices. In this paper, we used the capability of dispersion management to extend the bandwidth of THz absorbers. As a proof‐of‐concept, a dual metasurface‐based reflective device was proposed for broadband near‐unity THz absorber, which was composed of two polarization‐independent metasurfaces separated from a metallic ground by dielectric layers with different thickness. Benefiting from the fully released dispersion management ability in adjusting the dimensions of the metasurfaces, we obtained an absorbance above 90% in the frequency range from 0.52 to 4.4 THz and the total thickness for the bandwidth approaching the theoretical Rozanov limit. The experimental results verified the ability of dispersion management in designing broadband absorbers and the performance of the designed absorber. The underlying physical mechanism of dispersion management was interpreted in the general equivalent circuit theory and transmission line model. In addition, the catenary optical model was used to further interpret the physics behind this dual metasurface. Moreover, we found that the alignment deviations between the dual metasurface had little impact on the performance of the designed absorber, which indicates that the dual‐metasurface does not require center alignment and is easy to be fabricated. The results of this work could broaden the application areas of THz absorbers.

1 July 2018 in AIP Advances
Verified
Journal Article
Open access
PDF file
GSGuoqing Shen
Guoqing Shen
MZMing Zhang
Ming Zhang
YJYanping Ji
Yanping Ji
WHWanxia Huang
Wanxia Huang
HYHonglin Yu
Honglin Yu
JSJianping Shi
Jianping Shi
Single-layer metallic rings are the effective structure cell which are widely used to design single-band and multiband perfect metamaterial absorbers owning to their electromagnetic resonance. However, the absorbers based on the single-layer metallic rings have a common shortcoming, that is the narrow absorption bandwidth. To overcome the limitations, here we proposed a single-layer, flexible and broadband terahertz metamaterial absorber, which consists of four sub-cells with multiple metal rings and a metal ground plane separated by a dielectric layer. By enhancing the coupling response between adjacent metallic rings and merging the adjacent resonant peaks of multi-resonators, we experimentally observed broadband characteristics at the terahertz band. The average absorption of 88% from 0.63 to 1.34 THz and the relative absorption bandwidth of 95% at the incident angle of 15o for TE polarization. Correspondingly, for TM polarization the absorption of more than 80% from 0.61 to 1.1 THz with the relative absorption bandwidth of 80% were also observed. The results went far beyond the previous single-layer absorbers based on metal rings and were much better than the fractal-cross structure reported recently [Kenney et al., ACS Photonics 4, 2604 (2017)]. We had reason to believe that the presented terahertz metamaterial absorber with broad absorption bandwidth and simple structure can find important applications in communication, stealth, energy harvesting systems and so on.

13 October 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
MZMing Zhang
Ming Zhang
PDPeng Dong
Peng Dong
YWYu Wang
Yu Wang
BWBaozhu Wang
Baozhu Wang
LYLin Yang
Lin Yang
JZJunyao Zhang
Junyao Zhang
In the past decades, metasurfaces have shown their extraordinary abilities on manipulating the wavefront of electromagnetic wave. Based on the ability, various kinds of metasurfaces are designed to realize new functional metadevices based on wavefront manipulations, such as anomalous beam steering, focus metalens, vortex beams generator, and holographic imaging. However, most of the previously proposed designs based on metasurfaces are fixed once design, which is limited for applications where light modulation needs to be tunable. In this paper, we proposed a design for THz tunable wavefront manipulation achieved by the combination of plasmonic metasurface and phase change materials (PCMs) in THz region. Here, we designed a metal-insulator-metal (MIM) metasurface with the typical C-shape split ring resonator (CSRR), whose polarization conversion efficiency is nearly 90% for circular polarized light (CPL) in the range of 0.95~1.15 THz when PCM is in the amorphous state, but the conversion efficiency turns to less than 10% in the same frequency range when PCM switches into the crystalline state. Then, benefiting from the high polarization conversion contrast of unit cell, we can achieve tunable wavefront manipulation by utilizing the Pancharatnam–Berry (PB) phase between the amorphous and crystalline states. As a proof-of-concept, the reflective tunable anomalous beam deflector and focusing metalens are designed and characterized, and the results further verify their capability for tunable wavefront manipulation in THz range. It is believed that the design in our work may pave the way toward the tunable wavefront manipulation of THz waves and is potential for dynamic tunable THz devices.

19 November 2018 in IEEE Photonics Journal
Verified
Journal Article
Open access
JYJing Yuan
Jing Yuan
JLJun Luo
Jun Luo
MZMing Zhang
Ming Zhang
MPMingbo Pu
Mingbo Pu
XLXiong Li
Xiong Li
XLXiangang Luo
Xiangang Luo
Broadband absorbers in the terahertz region (0.1-10THz) have attracted considerable attentions due to its important applications in detecting, imaging and electromagnetic stealth. Recently, terahertz absorbers with broadband features have been widely investigated, however the achievement of ultra-broad bandwidth is still challenging due to the limitations of complex structural design and fabrication processes. In this letter, an ultra-broadband terahertz absorber covering the entire terahertz regime (0.1-10THz) based on the heavily doped silicon has been designed and fabricated, which is composed of double-layered binary gratings filled with the SU-8 photoresist. Antireflection techniques (SU-8 layer) was utilized to further promote the performance of the terahertz absorber at high frequencies through matching the impedance between free space and doped-silicon substrate. The measured absorption exceeding 87% within the frequency range of 0.3-10THz has verified the proposed approach in designing the ultra-broadband terahertz absorber. Furthermore, the designed absorber remains high performance in the case of wide-angle incidence even up to 60°. Benefiting from the simple structure, the absorber is easy to be fabricated by common optical lithography. We believe the results of this work could broaden the application areas of terahertz absorbers.