Attenuation of the laser beam in underwater transmission and detection due to absorption and scattering results in a rapid reduction in energy and blurring of the image. By combining the bidirectional reflectivity distribution function (BRDF) with the Monte Carlo (MC) method, a full-link underwater imaging process model was established which comprehensively investigated the influence of water quality, transmission distance and target characteristics on imaging performance. In order to describe the transmission process of the light more accurately, by adding particles with both absorption and scattering functions in the medium, the Mie scattering theory was employed to simulate the real channel. Moreover, while setting the gate width, the pre-calibrated detector response curve was employed to build a corresponding relationship between the image grayscale and the detector collection energy, aiming to simulate the working mode of the detector in the experiment. In various imaging scenarios, the maximum relative errors between the simulated images and experimental results were within 30%, which proved the correctness of the imaging simulation model and the feasibility of the imaging MC (IMC) method to evaluate the quality of whole imaging process.
The efficacy of underwater laser detection is considerably impacted by the intense attenuation of light resulting from the scattering and absorption effects of water. In this study, we present the simulation and design of the underwater Lidar system that integrates the paraxial multi-channel detection strategy to enhance the dynamic range in subsea environments. To evaluate the performance of the system with multiple detection channels, we introduce a multi-channel underwater Lidar simulation (MULS) method based on the radiative transfer Lidar equations. Experimental validations were conducted under varied water conditions to assess the performance of the prototype and validate the simulation results. The measured range accuracy of each channel in the prototype is better than 0.1085 m, and the simulated and measured waveforms exhibit strong correlations, verifying the reliability and validity of the simulation method. The effects of transceiver configuration and the maximum detectable range of different detection methods were also discussed. Preliminary results indicate that the paraxial multi-channel design effectively suppresses near-field backscattering and substantially enhances the maximum detectable range. The findings presented in this study may provide valuable insights for the design and optimization of future underwater laser detection systems.
Over the last two decades, Geiger-mode lidar (GML) systems have been developing rapidly in defense and commercial applications, demonstrating high point density and great collection efficiency. We presented a circular scanning GML system simulation model for performance prediction and developed a GML system for civilian mapping. The lidar system used an eye-safe fiber laser at 1545 nm coupled with a 64 × 64 pixels photon-counting detector array. A real-time data compression algorithm was implanted to reduce half of the data transmission rate and storage space compared to the uncompressing situation. The GML system can operate at aircraft above-ground levels (AGLs) between 0.35 km and 3 km, and at speeds in excess of 220 km/h. The initial flight tests indicate that the GML system can operate day and night with an area coverage of 366 km2/h. The standard deviations of the relative altimetric accuracy and the relative planimetric accuracy are 0.131 m and 0.152 m, respectively. The findings presented in this article guide the implementation of designing an airborne GML system and the data compression method.
As an active remote sensing technology, airborne LIDAR can work at all times while emitting specific wavelengths of laser light that can penetrate seawater. Airborne LIDAR bathymetry (ALB) records an object’s full return waveform, including the water surface, water column, seafloor, and the objects on it. Due to the seawater’s absorption and scattering and the seafloor’s reflectivity effect, the seafloor’s amplitude of seafloor echoes varies greatly. Seafloor echoes with low signal-to-noise ratios are not easily detected using waveform processing methods, which can lead to insufficient seafloor topography depth and incomplete seafloor topography coverage. To extract faint seafloor echoes, we proposed a depth extraction method based on the PointConv deep learning model, called FWConv. The method assumed that spatially adjacent echoes were correlated. We converted all the spatially adjacent multi-frame waveforms into a point cloud. Each point represented a bin value in the waveform, and the points’ properties contained spatial coordinates and the amplitude in the waveform. In the semantic segmentation of these point clouds using deep learning models, we considered not only each centroid’s amplitude, but also its neighboring points’ distance and amplitude. This enriched the centroids’ features and allowed the model to better discriminate between background noise and seafloor echoes. The results showed that FWConv could extract faint seafloor echoes in the experimental area and was not easily affected by noise, and that the correctness reached 99.82%. The number of point clouds increased by 158%, and the seafloor elevation accuracy reached 0.20 m concerning the multibeam echo sounder data.