Airborne LiDAR bathymetry (ALB) has proven to be an effective technology for shallow water mapping. To collect data with a high point density, a lightweight dual-wavelength LiDAR system mounted on unmanned aerial vehicles (UAVs) was developed. This study presents and evaluates the system using the field data acquired from a flight test in Dazhou Island, China. In the precision and accuracy assessment, the local fitted planes extracted from the water surface points and the multibeam echosounder data are used as a reference for water surface and bottom measurements, respectively. For the bathymetric performance comparison, the study area is also measured with an ALB system installed on the manned aerial platform. The object detection capability of the system is examined with placed small cubes. Results show that the fitting precision of the water surface is 0.1227 m, and the absolute accuracy of the water bottom is 0.1268 m, both of which reach a decimeter level. Compared to the manned ALB system, the UAV-borne system provides higher resolution data with an average point density of 42 points/m² and maximum detectable depth of 1.7–1.9 Secchi depths. In the point cloud of the water bottom, the existence of a 1-m target cube and the rough shape of a 2-m target cube are clearly observed at a depth of 12 m. The system shows great potential for flexible shallow water mapping and underwater object detection with promising results.

Ocean water column information profiles are essential for ocean research. Currently, water column profiles are typically obtained by ocean lidar instruments, including spaceborne, airborne and shipborne lidar, most of which are equipped with a 532 nm laser; however, blue wavelength penetrates more for open ocean detection. In this paper, we present a novel airborne dual-wavelength ocean lidar (DWOL), equipped with a 532 and 486 nm laser that can operate simultaneously. This instrument was designed to compare the performance of 486 and 532 nm lasers in a single detection area and to provide a reference for future spaceborne oceanic lidar (SBOL) design. Airborne and shipborne experiments were conducted in the South China Sea. Results show that—for a 500-frame accumulation—the 486 nm channel obtained volume profiles from a depth of approximately 100 m. In contrast, the vertical profiles obtained by the 532 nm channel only reached in a depth of 75 m, which was approximately 25% less than that of 486 m channel in the same detection area. Results from the inverse lidar attenuation coefficient $\alpha (z)$ for the DWOL show that the maximum value of $\alpha (z)$ ranged from 40 to 80 m, which was consistent with the chlorophyll-scattering layer (CSL) distribution measured by the shipborne instrument. Additionally, ${\alpha }_{486}(z)$ decreased for depth beyond 80 m, indicating that the 486 nm laser can potentially penetrate the entire CSL.

Based on the homodyne detection, a compact and cost-effective all-fiber laser Doppler vibrometer (LDV) with high resolution is presented. For the signal processing, the discrimination algorithm combined with the nonorthogonal correction is applied. The algorithm corrects the quadrature imbalance and other nonlinearity. In the calibration experiment, with the glass pasted on a piezoceramic transducer (PZT), the velocity resolution of 62 nm/s at 4 kHz and displacement resolution of 2.468 pm are achieved. For the LDV-based acousto-optic communication, the minimum detectable sound pressure level (SPL) reached 0.12 Pa under the hydrostatic air-water surface. The results demonstrate that the designed homodyne LDV has a low system background noise and can offer high precision in the vibration measurement.

A short-range, compact, real-time pulsed laser rangefinder is constructed based on pulsed time-of-flight (ToF) method. In order to reduce timing discrimination error and achieve high ranging accuracy, gray-value distance correction and temperature correction are proposed, and are realized with a field programmable gate array (FPGA) in a real-time application. The ranging performances—such as the maximum ranging distance, the range standard deviation, and the ranging accuracy—are theoretically calculated and experimentally studied. By means of these proposed correction methods, the verification experimental results show that the achievable effective ranging distance can be up to 8.08 m with a ranging accuracy of less than ±11 mm. The improved performance shows that the designed laser rangefinder can satisfy on-line ranging applications with high precision, fast ranging speed, small size, and low implementation cost, and thus has potential in the areas of robotics, manufacturing, and autonomous navigation.

Attenuation of the laser beam in underwater transmission and detection due to absorption and scattering results in a rapid reduction in energy and blurring of the image. By combining the bidirectional reflectivity distribution function (BRDF) with the Monte Carlo (MC) method, a full-link underwater imaging process model was established which comprehensively investigated the influence of water quality, transmission distance and target characteristics on imaging performance. In order to describe the transmission process of the light more accurately, by adding particles with both absorption and scattering functions in the medium, the Mie scattering theory was employed to simulate the real channel. Moreover, while setting the gate width, the pre-calibrated detector response curve was employed to build a corresponding relationship between the image grayscale and the detector collection energy, aiming to simulate the working mode of the detector in the experiment. In various imaging scenarios, the maximum relative errors between the simulated images and experimental results were within 30%, which proved the correctness of the imaging simulation model and the feasibility of the imaging MC (IMC) method to evaluate the quality of whole imaging process.

The efficacy of underwater laser detection is considerably impacted by the intense attenuation of light resulting from the scattering and absorption effects of water. In this study, we present the simulation and design of the underwater Lidar system that integrates the paraxial multi-channel detection strategy to enhance the dynamic range in subsea environments. To evaluate the performance of the system with multiple detection channels, we introduce a multi-channel underwater Lidar simulation (MULS) method based on the radiative transfer Lidar equations. Experimental validations were conducted under varied water conditions to assess the performance of the prototype and validate the simulation results. The measured range accuracy of each channel in the prototype is better than 0.1085 m, and the simulated and measured waveforms exhibit strong correlations, verifying the reliability and validity of the simulation method. The effects of transceiver configuration and the maximum detectable range of different detection methods were also discussed. Preliminary results indicate that the paraxial multi-channel design effectively suppresses near-field backscattering and substantially enhances the maximum detectable range. The findings presented in this study may provide valuable insights for the design and optimization of future underwater laser detection systems.