By irradiation with 0.5 ns laser pulses at a wavelength λ = 1.064 µm, laser-induced periodic surface structures (LIPSS) were fabricated on a steel substrate. In addition to low-spatial-frequency LIPSS (LSFL), a high-spatial-frequency LIPSS (HSFL) of period Λ ~ 0.4λ with two-dimensional expansion was formed, although it is generally recognized that HSFL are formed only by ultrafast laser pulses. The wavevector of the observed HSFL was perpendicular to the electric field of the irradiated laser pulse (each ridge/groove of the HSFL was parallel to the electric field). We discuss the relationship between the formation of HSFL and the pulse duration.
We describe a novel microfabrication method based on interference of several coherent laser pulses in photosensitive media. The method allows to transform the periodic multidimensional interference patterns into periodic modulation of dielectric properties of the material, and is therefore potentially suitable for the photonic crystal fabrication in materials like photoresists, photosensitive glasses, and others. We have fabricated one, two, an three-dimensional photonic crystals with different lattices and sub-micrometer periods. The fabricated structures have high structural quality, as evidenced by confocal and scanning electron microscopes. Furthermore, using numerical simulations we explore the possibilities to obtain body-centered-cubic and diamond photonic crystal lattices by varying optical phases of the interfering beams. Numerical simulations are also used to reveal photonic bandgap properties of some 2D photonic crystals, fabricated using this technique.
Using focused subnanosecond laser pulses at $$1.064\,\upmu \hbox {m}$$ wavelength, modification of silicon into opaque state was induced. While silicon exhibits one-photon absorption at this wavelength, the modification was induced inside $$300\,\upmu \hbox {m}$$ -thick silicon substrate without damaging top or bottom surfaces. The depth range of the focus position was investigated where inside of the substrate can be modified without damaging the surfaces. Using this technique, diffraction gratings were inscribed inside silicon substrate. Diffraction from the gratings were observed, and the diffraction angle well agreed with the theoretical value. These results demonstrate that this technique could be used for fabricating infrared optical elements in silicon.
We report spontaneous formation of 10-μm-scale periodic patterns in transverse-scanning femtosecond (fs) laser processing inside a glass substrate. The formation of the periodic patterns was critically dependent on the distance of the focus from the back surface; they formed only when fs pulses were focused slightly inside (∼ a few micrometers) from the back surface. The periods ranged from 7 to 16 μm, which is much longer than the distance between neighboring irradiation spots (0.1–1 μm in the present experiments), the diameter of the individual modified spots (about 2 μm), and the wavelength (0.8 μm). The patterns formed without any intentional modulation; just by scanning the sample at a constant speed during irradiation of fs laser pulses. The dependence on scanning speed and repetition rate of the laser were also investigated, and a possible formation scenario for this “long” periodic pattern was described.
Miniature internal threads (tapped holes) of S0.5 were fabricated in a glass substrate. Water-assisted laser drilling was applied for fabrication of the threads of S0.5 standard using a subnanosecond laser as a light source. The landscape of the inner surface of the threads was measured by a laser microscope, and showed reasonable agreement with the desired standard. As a proof of concept, a commercial external screw was fitted to the fabricated internal thread.