Polariscopy is demonstrated using hyperspectral imaging with a focal plane array (FPA) detector in the infrared (IR) spectral region under illumination by thermal and synchrotron light sources. FPA Fourier-transform IR (FTIR) imaging microspectroscopy is useful for monitoring real time changes at specific absorption bands when combined with a high brightness synchrotron source. In this study, several types of samples with unique structural motifs were selected and used for assessing the capability of polariscopy under this FPA-FTIR imaging technique. It was shown that the time required for polariscopy at IR wavelengths can be substantially reduced by the FPA-FTIR imaging approach. By using natural and laser fabricated polymers with sub-wavelength features, alignment of absorbing molecular dipoles and higher order patterns (laser fabricated structures) were revealed. Spectral polariscopy at the absorption peaks can reveal the orientation of sub-wavelength patterns (even when they are not spatially resolved) or the orientation of the absorbing dipoles.
We report the design and fabrication of perfect absorber metasurfaces for infrared spectral range using the direct laser writing technique. The metasurface structures have a helix-based architecture, which has advantages in comparison to traditional planar architectures, but is difficult to fabricate due to complex shapes and the sub-micrometer size of 3D helices comprising them. This challenge was addressed by fabricating dielectric templates of structures using the femtosecond direct laser write technique, which provides spatial resolution close to 100~nm, and subsequently metalizes the templates using gold sputtering. Optical characterization of the fabricated samples reveals resonant absorption in excess of 80\% in the wavelength range of $6-11\,\mu$m in accordance with theoretical expectations. Similar structures may find applications in bolometers, narrow-band thermal detectors and emitters, and infrared energy harvesting devices.
We describe a novel microfabrication method based on interference of several coherent laser pulses in photosensitive media. The method allows to transform the periodic multidimensional interference patterns into periodic modulation of dielectric properties of the material, and is therefore potentially suitable for the photonic crystal fabrication in materials like photoresists, photosensitive glasses, and others. We have fabricated one, two, an three-dimensional photonic crystals with different lattices and sub-micrometer periods. The fabricated structures have high structural quality, as evidenced by confocal and scanning electron microscopes. Furthermore, using numerical simulations we explore the possibilities to obtain body-centered-cubic and diamond photonic crystal lattices by varying optical phases of the interfering beams. Numerical simulations are also used to reveal photonic bandgap properties of some 2D photonic crystals, fabricated using this technique.