The use of traditional Dye-sensitized solar cells (DSSCs) is limited due to the use of toxic and non-environmentally safe solvents. In this review, water is proposed as a viable alternative to developing green chemistry and sustainable materials for DSSCs. However, water-based DSSCs (WBDSSCs) require improvement in their photovoltaic parameters. The detachment of dye molecules from the semiconductor and the poor solubility of iodine in water are the primary reasons for their low efficiency. This review analyzes the best results achieved by 100% aqueous electrolytes containing synthetic, organic, and natural dyes to identify the best conditions to overcome these limitations. Developing a suitable photoanode/electrolyte interface and finding a compromise in the choice of dye are the main research goals in the coming years. WBDSSCs can contribute significantly to producing clean energy using sustainable and environmentally friendly materials. Furthermore, here we report the state of the art of the emerging technology of underwater dye-sensitized solar cells, which are a promising technology for generating renewable energy in aquatic environments. Recent advancements in material science and device engineering have shown promising results in enhancing their efficiency and durability. Further research and development can make these devices a viable alternative for sustainable energy generation in a wide range of underwater applications.

The identification of more efficient, clean, secure, and competitive energy supply is necessary to align with the needs of sustainable devices. For this reason, a study for developing innovative dye-sensitized solar cells (DSSCs) based on microbial pigments is reported starting from Talaromyces atroroseus GH2. The fungus was cultivated by fermentation and the extracellular pigment extract was characterized by HPLC-DAD-ESI-MS analyses. The most abundant compound among the 22 azaphilone-type pigments identified was represented by PP-O. The device’s behavior was investigated in relation to electrolyte and pH for verifying the stability on time and the photovoltaic performance. Devices obtained were characterized by UV–vis measurements to verify the absorbance intensity and transmittance percentage. Moreover, photovoltaic parameters through photo-electrochemical measurements (I–V curves) and impedance characteristics by Electrochemical Impedance Spectroscopy (EIS) were determined. The best microbial device showed a short-circuit current density (Jsc) of 0.69 mA/cm², an open-circuit photo-voltage (Voc) of 0.27 V and a Fill Factor (FF) of 0.60. Furthermore, the power conversion efficiency (PCE) of the device was 0.11%. Thus, the present study demonstrated the potential of microbial origin pigments for developing DSSCs. Graphical abstract

A gold nanoparticles transparent electrode was realized by chemical reduction. This work aims to compare the transparent gold nanoparticles electrode with a more commonly utilized gold-film-coated electrode in order to investigate its potential use as counter-electrode (CE) in dye-sensitized solar cells (DSSCs). A series of DSSC devices, utilizing I⁻/I³⁻ and Co(III)/(II) polypyridine redox mediators [Co(dtb)3]³⁺/²⁺; dtb = 4,4′ditert-butyl-2,2′-bipyridine)], were evaluated. The investigation focused firstly on the structural characterization of the deposited gold layers and then on the electrochemical study. The novelty of the work is the realization of a gold nanoparticles CE that reached 80% of average visible transmittance. We finally examined the performance of the transparent gold nanoparticles CE in DSSC devices. A maximum power conversion efficiency (PCE) of 4.56% was obtained with a commercial I⁻/I³⁻-based electrolyte, while a maximum 3.1% of PCE was obtained with the homemade Co-based electrolyte.

Electrospinning technologies for the realization of active polymeric nanomaterials can be easily up-scaled, opening perspectives to industrial exploitation, and due to their versatility they can be employed to finely tailor the size, morphology and macroscopic assembly of fibers as well as their functional properties. Light-emitting or other active polymer nanofibers, made of conjugated polymers or of blends embedding chromophores or other functional dopants, are suitable for various applications in advanced photonics and sensing technologies. In particular, their almost one-dimensional geometry and finely tunable composition make them interesting materials for developing novel lasing devices. However, electrospinning techniques rely on a large variety of parameters and possible experimental geometries, and they need to be carefully optimized in order to obtain suitable topographical and photonic properties in the resulting nanostructures. Targeted features include smooth and uniform fiber surface, dimensional control, as well as filament alignment, enhanced light emission, and stimulated emission. We here present various optimization strategies for electrospinning methods which have been implemented and developed by us for the realization of lasing architectures based on polymer nanofibers. The geometry of the resulting nanowires leads to peculiar light-scattering from spun filaments, and to controllable lasing characteristics