This paper proposes a novel Fuzzy-MPDTC control applied to a fuel cell battery electric vehicle whose traction is ensured using a permanent magnet synchronous motor (PMSM). On the traction side, model predictive direct torque control (MPDTC) is used to control PMSM torque, and guarantee minimum torque and current ripples while ensuring satisfactory speed tracking. On the sources side, an energy management strategy (EMS) based on fuzzy logic is proposed, it aims to distribute power over energy sources rationally and satisfy the load power demand. To assess these techniques, a driving cycle under different operating modes, namely cruising, acceleration, idling and regenerative braking is proposed. Real-time simulation is developed using the RT LAB platform and the obtained results match those obtained in numerical simulation using MATLAB/Simulink. The results show a good performance of the whole system, where the proposed MPDTC minimized the torque and flux ripples with 54.54% and 77%, respectively, compared to the conventional DTC and reduced the THD of the PMSM current with 53.37%. Furthermore, the proposed EMS based on fuzzy logic shows good performance and keeps the battery SOC within safe limits under the proposed speed profile and international NYCC driving cycle. These aforementioned results confirm the robustness and effectiveness of the proposed control techniques.

This paper presents a detailed analysis and comparative study of three torque control methodologies with fuzzy logic, namely direct torque control (DTC), fuzzy direct torque control (FDTC), and model predictive direct torque control (MPDTC), for PMSM control applied to an electric vehicle. The three control strategies are designed and developed to control torque in order to achieve vehicle requirements, such as minimum torque and flux ripples, fast dynamic response, and maximum efficiency. To enhance the performance and efficiency of the overall drive, a bidirectional DC/DC buck-boost converter is connected to the Li-ion battery. In addition, a fuzzy logic controller (FLC) is used in the outer loop to control the speed of the PMSM. As a result, the tuning difficulty of the conventional proportional-integral (PI) controller is avoided and the dynamic speed response is improved. Simulation results obtained from the three control techniques establish that the proposed system via the MPDTC technique reduces the torque ripples, flux ripples, reduces the THD of the PMSM current, and achieves a faster transient response. Additionally, the MPTDC technique enabled the electric vehicle to cover the longest distance, with approximately 110.72 km in a charging cycle. The real-time simulation is developed using the RT LAB simulator, and the obtained results confirm the superiority of the MPDTC technique over conventional DTC and FDTC techniques.

The paper addresses the ongoing and continuous interest in photovoltaic energy systems (PESs). In this context, the study focuses on an isolated photovoltaic system with hybrid battery-supercapacitor storage (HBSS). The integration of supercapacitors (SCs) in this system is particularly important because of their high specific power density. In photovoltaic (PV) systems, multi-storage systems use two or more energy storage technologies to enhance system performance and flexibility. When batteries and supercapacitors are combined in a PV system, their benefits are maximized and offer a more reliable, efficient, cost-effective energy storage option. In addition, effective multi-storage power management in a PV system needs a solid grasp of the energy storage technologies, load power demand profiles, and the whole system architecture. This work establishes a battery-supercapacitor storage system (HBSS) by combining batteries and supercapacitors. The primary objective is to devise a novel management algorithm that effectively controls the different power sources. The algorithm is designed to manage the charge and discharge cycles of the hybrid battery-supercapacitor energy storage system (HBSS), thereby guaranteeing that the state of charge (SOC) for both batteries and supercapacitors is maintained within the specified range. The proposed management algorithm is designed to be simple, efficient, and light on computational resources. It efficiently handles the energy flow within the HBSS, optimizing the usage of both batteries and supercapacitors based on real-time conditions and energy demands. The proposed method ensures their longevity and maximizes their performance by maintaining the SOC of these energy storage components within the specified limits. Simulation results obtained from applying the management strategy are found to be satisfactory. These results show that the proposed algorithm maintains the SOC of batteries and supercapacitors within the desired range, leading to improved energy management and enhanced system efficiency.

The paper addresses the ongoing and continuous interest in photovoltaic energy systems (PESs). In this context, the study focuses on an isolated photovoltaic system with hybrid bat-tery-supercapacitor storage (HBSS). The integration of supercapacitors (SCs) in this system is of particular importance because of their high specific power density. In photovoltaic (PV) systems, multi-storage systems use two or more energy storage technologies to enhance system perfor-mance and flexibility. When batteries and supercapacitors are combined in a PV system, their benefits are maximized and offer a more reliable, efficient, and cost-effective energy storage op-tion. In addition, effective multi-storage power management in a PV system needs a solid grasp of the energy storage technologies, load power demand profiles, and the whole system architecture. In this work, battery-supercapacitor storage system (HBSS) is established by combining batteries and supercapacitors. The primary objective is to devise a novel management algorithm that ef-fectively controls the different power sources. The algorithm's purpose is to regulate the charge and discharge cycles of the HBSS, ensuring that the state of charge (SOC) of both batteries and supercapacitors remains within the desired range. The proposed management algorithm is de-signed to be simple, efficient, and light on computational resources. It efficiently handles the energy flow within the HBSS, optimizing the usage of both batteries and supercapacitors based on real-time conditions and energy demands. By maintaining the SOC of these energy storage components within the specified limits, the proposed method ensures their longevity and max-imizes their performance. Simulation results obtained from applying the management strategy are found to be satisfactory. These results show that the proposed algorithm maintains the SOC of batteries and supercapacitors within the desired range, leading to improved energy management and enhanced system efficiency.

This paper presents the application of fuzzy logic torque and speed control of a permanent magnet synchronous machine (PMSM) using direct torque control (DTC). In this approach, the classical controllers are replaced by two fuzzy controllers to minimize torque, flux and current ripples. A comparative study between the classical DTC and fuzzy logic DTC shows that flux, torque and stator currents have been minimized without any effective change of the inverter switching frequency.