The use of renewable energy resources has created some problems for power systems. One of the most important of these is load frequency control (LFC). In this study, in order to solve the LFC problem, modern control methods were applied to a two area multi source interconnected power system. A photovoltaic solar power plant (PV-SPP) was also connected, in order to identify the harmful effects on the frequency of the system. A new Genetic-based Fuzzy Logic (GA-FL) controller was designed to control the frequency of the system. For comparison, conventional proportional-integral-derivative (PID), fuzzy logic (FL), and Genetic Algorithm (GA)-PID controllers were also designed. The new control method exhibited a better performance than the conventional and other modern control methods, because of the low overshoot and short settling time. All simulations were realized with the Matlab-Simulink program.

Background: Future sustainable energy industrialization is a green energy source that has a lower circumstantial impact than traditional energy technologies. The advancement of new energy generation is important to expand the share of renewable energy sources. Objective: Worldwide, for the next generation, future energy demand may be fulfilled by using one of the renewable energy sources such as thermo electricity. Methods: The bismuth telluride–based (Bi₂Te₃-based) nanostructure material in thermo electricity still has a major part of applications. It is known as the most prospective TE device manufactured from a research arena towards successful commercialization. Results: The Bi₂Te₃-based nanostructure material is now on commercialization stages that it has some limitations. In order to find out the future direction of research and development of this material, the material will face a challenging way. Conclusion: The review paper provides an effective approach to overcome the limitation of Bi₂Te₃- based nanostructure. Moreover, in this review paper, the performance evaluation with existing Bi₂Te₃-based nanostructure and some other TE materials will be discussed in detail.

Today, with the increase of industrialization, the waste heat emitted by the industrial machines used has started to increase. Therefore, the energy efficiency of these devices also decreases. In addition, this waste heat remains a bad factor that plays a role in the world's climate change. Governments are implementing incentive policies to increase energy efficiency and reduce greenhouse gas emissions. Therefore, both scientists and engineers strive for a cleaner environment and energy. Thermoelectric generators (TEGs) are one of the devices that contribute to energy efficiency and sustainable energy production by ensuring the recovery of a certain part of the waste heat emitted by these machines to the environment. The TEGs have found traditional uses from the waste heat of microprocessors to the waste heat of stoves. However, their proliferation is limited by their efficiency less than 10% and their high purchasing costs. Academicians and engineers continue to work without slowing down to overcome these. The semiconductors with low thermal conductivity and high electrical conductivity are the main subjects studied in this field. With overcoming these difficulties, it is aimed to use thermoelectric generators in the future to convert the waste heat of almost all devices into electrical energy. Therefore, the main purpose of this study is to investigate the current innovations of TEGs and to determine the future trend. Among the main findings of this study, it is predicted that TEGs will be widely used in areas where there is a need for silent and maintenance-free energy in the future.