The stability of riverbank slopes is crucial in watershed ecology. The morphology and tensile strength properties of plant roots play a significant role in slope stability, which is of great importance for the ecological stability of riverbanks. The Jinsha and Yalong River basins are the largest hydropower bases in China and are in the ecologically fragile areas of the dry and hot river valleys, yet fewer studies are available on these basins. Further studies on the growth morphology and root mechanical properties of plant roots in the riparian zone at different elevations have not been reported. Therefore, we selected the dominant species of Cynodon dactylon root as the research subject, analyzed the root morphology, and conducted indoor single-root tensile tests to study its root structure and mechanical properties at various elevations. The results showed that the root morphology of Cynodon dactylon was positively correlated with elevation. Compared to low elevations (L and M), the root length increased by 57.3% and 21.47%, the root diameter increased by 24.85% and 13.92%, the root surface area increased by 93.5% and 67.37%, and the total root volume increased by 119.91% and 107.36%. As the elevation gradient increased, the flooding time decreased, leading to more developed plant roots for Cynodon dactylon. The Young’s modulus ranged from 148.43 to 454.18 MPa for Ertan Cynodon dactylon roots and 131.31 to 355.53 MPa for Guanyingyan Cynodon dactylon roots. The maximum tensile strength, ultimate tensile strength, ultimate elongation, and Young’s modulus of the plant root of the Cynodon dactylon showed a power function relationship with the diameter. The maximum tensile strength increased as the diameter increased, while the remaining properties decreased following a power function relationship. The maximum tensile strength, ultimate tensile strength, and Young’s modulus of Cynodon dactylon were positively correlated with elevation, while the ultimate elongation was negatively correlated with elevation. The results elucidate the influence of elevation on the root morphology and mechanical properties of dominant riparian species. This provides a theoretical basis for managing and protecting riparian slopes in ecologically fragile areas.
The utilization of dredged sludge can reduce environmental pollution and save land resources. To explore using sludge resources in ecological slope-protection projects, dredged sludge was incorporated into ecological slope-protection soil. Cynodon dactylon was planted to analyze the effect of sludge content on its growth. Direct-shear tests on the slope-protection soil with and without Cynodon dactylon were conducted to elaborate on the effect of sludge content, water content, and roots on the mechanical properties of the sludge-clay mixture. When the sludge content was 50%, the sludge content’s effect was meagre. As the sludge content increased, the cohesion and internal friction angle of the sludge-clay mixture without roots decreased, lowering the shear strength. The soil’s cohesive force and internal friction angle follows the sequence: natural state with roots > natural state without roots > saturated state with roots > saturated state without roots. The cohesion and shear strength of the sludge-clay mixture with roots increased at first before decreasing with an increase in sludge content, optimized at 50% sludge content. Here, the ecological slope stability was the best, meaning that the optimum sludge proportion was 50%. GRAPHICAL ABSTRACT
This study aimed to investigate the relationships between the mechanical properties of plant roots and the soil reinforcement characteristics of the dominant species in the dominant riparian plants under various flooding durations. The objective was to comprehensively evaluate the optimal flooding duration for each plant under various flooding durations. This research was conducted to provide a scientific basis for plant restoration efforts. The primary focus of the study was on common species found in the middle and lower reaches of the Yangtze River, including Carex, Cynodon, and Eleusine. These species were cultivated in a local field setting and subsequently subjected to flooding tests of varying durations. The diameter of the root system gradually increases with prolonged flooding duration, while other root morphologies exhibit a trend of initially increasing and then decreasing. The flooding environment significantly influences the relationship between root diameter and the mechanical properties of the roots. This condition adversely affects Carex, whereas it has a beneficial impact on Cynodon and Eleusine. During the early stages of flooding, the shear strength of the plant root–soil complex increases; Carex is optimally applied in the restoration and protection of areas subjected to three to four months of flooding, with its ornamental value being particularly pronounced. Cynodon performs best in areas with up to six months of flooding, Eleusine is especially effective in regions with less than two months of flooding.
Soil structural instability in reservoir riparian zones, induced by water level fluctuations, threatens sustainable land use by accelerating land degradation. This study examined the impact of water-level variations on soil aggregate composition and stability based on key indicators, including water-stable aggregate content (WSAC), mean weight diameter (MWD), and geometric mean diameter (GMD). The Savinov dry sieving, Yoder wet sieving, and Le Bissonnais (LB) methods were employed for analysis. Results indicated that, with decreasing water levels and increasing soil layer, aggregates larger than 5 mm decreased, while aggregates smaller than 0.25 mm increased. Rising water levels and increasing soil layer corresponded to reductions in soil stability indicators (MWD, GMD, and WSAC), highlighting a trend toward soil structural instability. The LB method revealed the lowest aggregate stability under rapid wetting and the highest under slow wetting conditions. Correlation analysis showed that soil organic matter positively correlated with the relative mechanical breakdown index (RMI) (p < 0.05) and negatively correlated with the relative slaking index (RSI), whereas soil pH was negatively correlated with both RMI and RSI (p < 0.05). Comparative analysis of aggregate stability methods demonstrated that results from the dry sieving method closely resembled those from the SW treatment of the LB method, whereas the wet sieving method closely aligned with the FW (Fast Wetting) treatment of the LB method. The Le Bissonnais method not only reflected the outcomes of dry and wet sieving methods but also effectively distinguished the mechanisms of aggregate breakdown. The study concluded that prolonged flooding intensified aggregate dispersion, with mechanical breakdown influenced by water levels and soil layer. Dispersion and mechanical breakdown represent primary mechanisms of soil aggregate instability, further exacerbated by fluctuating water levels. By elucidating degradation mechanisms, this research provides actionable insights for preserving soil health, safeguarding water resources, and promoting sustainable agricultural in ecologically vulnerable reservoir regions of the Yangtze River Basin.
Replacing conventional chemical binders with natural polymers in geotechnically treated soil allows for the creation of more sustainable materials with both valuable ecological and mechanical properties. Xanthan gum and sodium alginate are natural polymers with excellent binding properties and water retention, which can help reduce carbon emissions. However, there is a lack of research on how to achieve optimal performance through the rational formulation of different biopolymers. This study investigates the use of these two natural biopolymers as binders (xanthan gum and sodium alginate) in slope-protection habitats treated with soil optimised using response surface methodology (RSM) within Design-Expert analysis software. The effects of xanthan gum concentration, sodium alginate concentration, and time, as well as their interactions on the properties of treated soil, ryegrass growth, and soil greenhouse gas emissions were evaluated, resulting in an optimized substrate formulation that balances good geotechnical properties with low environmental impact. Pot cultivation trials indicated that cohesion (c) and internal friction angle (φ) increased linearly with rising xanthan gum and sodium alginate concentrations, while the number of ryegrass plants (Np) and root area ratio (RAR) decreased linearly with increasing binder concentration. Both CO2 and CH4 fluxes increased with rising binder concentrations. An analysis of variance (ANOVA) revealed that xanthan gum concentration had a stronger promoting effect on c and φ and a stronger inhibiting effect on Np and RAR than sodium alginate. In contrast, sodium alginate concentration exhibited a stronger inhibitory effect on CO2 and CH4 fluxes. Through comprehensive optimization of geotechnical properties, vegetation growth, and greenhouse gas emissions, the optimal formulation was determined to be 0.885% for xanthan gum and 0.791% for alginate. The optimized composition resulted in increases of 38.6% and 19.1% for c and φ, respectively, while Np and RAR increased by 7.7% and 15.0%, respectively. CO2 and CH4 fluxes decreased by 61.6% and 65.2%, respectively. This study contributes to advancing the sustainability of geotechnical treatments to favour vegetation regrowth. However, these materials will need to be further tested under field conditions to verify their effectiveness and duration.