Nanocomposites based on iron oxide/titanium oxide nanoparticles were prepared by employing green synthesis, which involved phytochemical-mediated reduction using ginger extract. XRD confirmed the composite formation, while scanning electron microscopy (SEM), dynamic light scattering (DLS), and energy-dispersive X-ray spectroscopy (EDX) was employed to investigate the particle size, particle morphology, and elemental analysis. SEM indicated the formation of particles with non-uniform shape and size distribution, while EDX confirmed the presence of Fe, Ti and oxygen in their elemental state. The surface effects were investigated by Fourier transform infrared radiation (FTIR) and impedance spectroscopy (IS) at room temperature. IS confirmed the co-existence of grains and grain boundaries. Thus, FTIR and IS analysis helped establish a correlation between enhanced surface activity and the synthesis route adopted. It was established that the surface activity was sensitive to the synthesis route adopted. The sample density, variation in grain size, and electrical resistivity were linked with surface defects, and these defects were related to temperature. The disorder and defects created trap centers at the sample’s surface, leading to adsorption of CO2 from the environment.
22 December 1998 in The Journal of Chemical Physics
The kinetics of CO chemisorption on both the and surfaces of Ir{100}, including the CO-induced surface restructuring process, have been studied by measuring the sticking probability as a function of the surface temperature and beam flux. Due to competition between desorption from the phase and growth of islands, the sticking probability on the initial surface is strongly flux-dependent at surface temperatures in the range It is shown that this is due to a strongly nonlinear dependence of the growth rate on the local CO coverage on the substrate, with an apparent reaction order of around 5. Desorption energies and pre-exponentials of desorption for CO from both the and surfaces have been determined by means of a modified lifetime measurement technique. Equilibrium coverages as well as isothermal desorption rates of CO were determined for both surface phases. The zero coverage desorption energy of CO from the substrate is and from the surface it is around 150 kJ/mol. This difference in adsorption energies is the driving force for the CO-induced to phase transition. TEAS data show that the local CO coverage on the growing islands during the phase transformation is 0.5 ML.
Bi-functional materials provide an opportunity for the development of high-performance devices. Up till now, bi-functional performance of NiCo2O4@SnS2 nanosheets is rarely investigated. In this work, NiCo2O4@SnS2 nanosheets were synthesized on carbon cloth by utilizing a simple hydrothermal technique. The developed electrode (NiCo2O4@SnS2/CC) was investigated for the detection of L-Cysteine and supercapacitors applications. As a non-enzymatic sensor, the electrode proved to be highly sensitive for the detection of L-cysteine. The electrode exhibits a reproducible sensitivity of 4645.82 μA mM−1 cm−2 in a wide linear range from 0.5 to 5 mM with a low limit of detection (0.005 μM). Moreover, the electrode shows an excellent selectivity and long-time stability. The high specific surface area, enhanced kinetics, good synergy and distinct architecture of NiCo2O4@SnS2 nanosheets produce a large number of active sites with substantial energy storage potential. As a supercapacitor, the electrode exhibits improve capacitance of 655.7 F g−1 at a current density of 2 A g−1 as compare to NiCo2O4/CC (560 F g−1). Moreover, the electrode achieves 95.3% of its preliminary capacitance after 10 000 cycles at 2 A g−1. Our results show that NiCo2O4@SnS2/CC nanosheets possess binary features could be attractive electrode material for the development of non-enzymatic biosensors as well as supercapacitors.
1 April 2020 in Materials Science in Semiconductor Processing
Multiferroics with strong magnetoelectric coupling can be created by improving the magnetostriction of the ferrite phase and combining it with the best-known piezoelectric. Herein, the ferromagnetic CoFe2O4 was modified with Al incorporation further improve the resistivity, magnetic, and magnetostrictive properties and then combined with (0.5)Ba(Zr0.2Ti0.8)O3−(0.5)(Ba0.7Ca0.3)TiO3 (BCZT) with different weight percentages. XRD results revealed the presence of a mixed spinel cubic phase for CAF (Fd-3m), whereas BCZT crystallized in a tetragonal structure (Amm2) in composite systems. The dielectric response of the materials was studied using impedance spectroscopy and it displayed a typical Maxwell–Wagner polarization of two-phase composites. The magnetic response of the CAF sample improved significantly which is attributed to the preference of Al3+ ions on tetrahedral sites. The magnetization of composites increased as the nonmagnetic BCZT component increased and the (0.75)CAF-(0.25)BCZT system had the highest saturation magnetization. We anticipate that these systems will have significantly improved magnetoelectric characteristics than unmodified CFO-BCZT systems.