Orthotropic steel deck (OSD) bridges are lightweight constructions which are convenient, especially for the achievement of long spans. Conversely, due to the stress concentration in correspondence to the numerous and unavoidable welded construction details, this bridge typology is prone to fatigue cracking under the effect of cyclic loading with high-stress amplitudes. Existing OSD bridges are particularly vulnerable to fatigue damage accumulation because of the dated standards adopted at the time of their design and the fact that heavy lorries have increased in travel frequency and weight. In the present paper, a case study of a northern Italian existing highway viaduct, built in the 1990s, is presented and analyzed. The fatigue damage accumulation was carried out according to the fatigue load models for road bridges reported in Eurocode EN 1991-2 and the assessment criteria indicated in EN 1993-1-9. The stress amplitude, in correspondence to the critical details of the bridge, is assessed by means of detailed finite-element calculations carried out with the software MIDAS GEN®. The amplitude and frequency of the travelling weights are assessed based on real traffic monitoring from the highway. Moreover, an automatic “rain-flow” algorithm is implemented, which is able to detect each nominal stress variation above the fatigue limit. In general, the bridge is not fully compliant with today’s standards when considering the entire duration of the prescribed life of the design. Countermeasures, like lane number reductions and lane reshaping, are critically analyzed since their effectiveness is questionable as far as the reduction in heavy traffic is concerned. Other interventions, like the replacement of the pavement in order to improve the stress redistribution upon the connection details below the wheel footprint, and continuous bridge inspections or monitoring, look more promising.
In professional practice, the design and verification of Reinforced Concrete (RC) and Prestressed Reinforced Concrete (PRC) structures are performed using a simplified calculation provided by the Eurocodes that limits resistance but that also includes a certain level of structural safety. Some aspects that directly affect the simplified methods involve the use of linear constitutive laws of materials. The use of non-linear laws is evident in the exploitation of reservoirs of strength and deformations of plastic materials in the Ultimate Limit State. The purpose of this research is to evaluate the increase in resistance to bending actions during the plasticization of the beam of existing bridges to support the decision-making process of the engineer in the assessment of existing structures. To achieve this, two codes (MEG Ductility, MEG Fiber Sections) were developed to provide the moment–curvature diagram of RC and PRC sections using non-linear bonds, and in this paper, the study of RC sections is reported. Furthermore, through a push-down analysis, two RC and PRC viaducts have been analyzed using the moment–curvature characteristics obtained from the realized codes and by varying the non-linear constitutive bonds. The results of this study provide valuable insights into the behavior of RC structures under bending actions and demonstrate the importance of considering non-linear material laws for accurate structural assessments. The findings contribute to the enhancement of the decision-making process of engineers when dealing with existing infrastructures.
Glass-Fiber-Reinforced Polymer (GFRP) bars are emerging as an alternative to steel reinforcement in concrete structures thanks to their high mechanical performance and intrinsic resistance to corrosion. Nevertheless, their actual sustainability must be verified through an assessment that considers long-term durability, life cycle environmental impacts, and economic feasibility. The replacement of steel reinforcement with GFRP in concrete bridge decks is herein evaluated through an integrated methodology. First, a comprehensive literature review examines the degradation processes observed experimentally and the associated long-term evolution of mechanical properties, providing the basis for defining realistic durability scenarios. Subsequently, a comparative Life Cycle Assessment is conducted adopting a cradle-to-grave system boundary and using Environmental Product Declarations to build the Life Cycle Inventory and perform the Impact Assessment. Normalization and weighting phases are included for a better understanding of the overall impacts of the two alternatives. In parallel, a Cost Analysis is performed consistently with the system boundaries and scenarios considered in the Life Cycle Assessment. Finally, the Envision protocol, a framework to evaluate sustainability and resilience of infrastructures, is applied to identify credits directly influenced by the adoption of GFRP reinforcement. The results show that steel reinforcement exhibits lower initial environmental impacts and remains more economical over short service life horizons. However, if the extended durability of GFRP is considered, the reduction in heavy maintenance activities allows this solution to achieve superior environmental performance and improved economic balance. The Envision-based evaluation further confirms the potential contribution of GFRP reinforcement to higher sustainability ratings in infrastructure projects.
Hybrid reinforced concrete (HRC) sections combining steel and fiber-reinforced polymer (FRP) bars provide a structural solution that balances durability, load-bearing capacity and energy dissipation. However, the absence of unified design provisions and the coexistence of distinct safety formats in European and American codes complicate the consistent assessment of ultimate limit state behavior under combined axial force and bending moment. In this study, a strain-based sectional model founded on compatibility and internal force equilibrium is implemented through a layer-by-layer numerical integration procedure to generate axial force–bending moment (N–M) interaction domains and moment–curvature (M–) relationships. The formulation is extended to a dimensionless framework in terms of normalized axial load, bending moment, total hybrid mechanical reinforcement ratio and hybridization parameter R. The analysis is conducted within two regulatory formats: the European framework based on Eurocode 2 and CNR-DT 203 R1/2026 and the American framework based on ACI 318-25 and ACI 440.11-22. The results show that increasing leads to a progressive expansion of the interaction domain and modifies the transition between FRP rupture-controlled and steel-yielding-controlled limit states. Increasing R shifts balanced conditions towards higher axial compression and bending levels. Differences between the two regulatory approaches are observed in terms of predicted curvature capacity and design resistance within the N–M domain, reflecting the distinct safety formats adopted. The proposed dimensionless parametric formulation enables consistent comparison of hybrid configurations and provides basis for interpreting failure-mode transitions and deformation capacity of HRC sections under combined axial and flexural actions.