Herein, we introduced a newly proposed mobile robot that uses three standing-wave type ultrasonic motors (USM) to realize holonomic movement on a surface. The USM is composed of two stacked-type piezoelectric actuators. Recently, with the miniaturization of electronic and MEMS devices and the progress of the bio-medical science, the demand for multifunctional manipulation of those chip parts and bio-medical cells has increased. Conventional multiaxial stages are too bulky for the multifunctional manipulation where multiple manipulators are required. Conventional precise mobile robots are feasible for miniaturization of the multifunctional manipulation, although their wires influence the positioning repeatability. USMs are feasible actuators for realizing wireless robots because its energy efficiency is high, although there is no article concerning the omnidirectional mobile robot using USMs thus far. The aim of this study is to develop a new type of the omnidirectional mobile robot driven by USMs. In experiments, we evaluated the feasibility by investigating velocity, positioning deviation, and achieving repeatability of translational movements under an open-loop control. Here, we determine the repeatability as a ratio of the standard deviation of the final points to the average path length. We confirmed that the proposed mobile robot achieves 31.5 mm/s of velocity and 3.2% of the repeatability with proper load.
In this paper, we describe development of the multi-axial micromanipulation organized by versatile micro robots using micro tweezers. To conduct microscopic operations, a unique locomotion mechanism composed of four piezoelectric actuators and two electromagnets is proposed. Here two legs arranged to cross each other are connected by four piezoelectric actuators so that the robot can move in any direction, i.e. in X and Y directions as well as rotate at the specified point precisely in the manner of an inchworm. To manipulate micro objects by these versatile micro robots, we have developed micro tweezers driven by 3 piezoelectric actuators. We have also developed an electromagnetic spherical micromanipulator to position the micro tweezers. The electromagnetic spherical micromanipulator rotates in yaw, roll and pitch directions independently. The electromagnetic spherical micromanipulator is a 1-inch cube size, so we can easily attach them on top of the versatile micro robots. We have developed the multi-axial micromanipulation organized by 3 versatile micro robots with the electromagnetic spherical micromanipulator and micro tweezers. The whole manipulation device is very small, 200 mm in diameter and 70 mm in height, so we can easily attach the device to micro processing instruments even if the working area is very small. This device has 21 DOF with less than 100 nm resolution. In experiments, we have demonstrated flexible handling of miniscule glass spheres with a diameter of 20 mum. We have also succeeded in fixing miniscule glass spheres on a sample table by an ultraviolet cure adhesive. The design procedure, basic performance and micro-assembling applications of this tiny robot are also discussed as part of the new field of micro robotics requiring especially high precision in certain regions.
5 April 2011 in IEEE/ASME Transactions on Mechatronics
In this paper, we describe the dynamical analysis and improvement of the maximum velocity within no slip of electromagnets for a 3-DOF inchworm mobile mechanism. The mechanism consists of four “Moonie” piezoelectric actuators and a pair of electromagnets and moves like an inchworm with less than 10-nm resolution. We calculate the dynamical relationship among 3-DOF motion, four piezoelectric displacements, drive frequency, magnetic force, mass of electromagnets, and spring constants of mechanical amplifiers. We also calculate the maximum velocity with no slip of electromagnets because the no-slip condition is significant for positioning repeatability. In several experiments, we have checked the theoretical validity and positioning repeatability. The design procedure, basic performance, and chip-mounting applications are also discussed for cultivating flexible, compact, low-inertia, and omnidirectional precise positioning technology.
Hydrogel actuators are ultrasoft and pliable but achieving high driving speeds with large deformation and fine local controllability is difficult because the driving force originates from the external air pressure or heat, and the base material is fragile. Herein, hydrogel actuators that allow high‐speed driving and large deformation with high‐frequency local controllability while maintaining softness are fabricated based on liquid metal gel fibers as electrodes by using microfluidic technology. The Lorentz force produced by an electric current and a magnet is used for actuation control. An ultrafast response of 260.5 mm s−1 with high‐frequency controllability (6 Hz) and a large deformation of 172% with hydrogel actuation are observed. As proof of concept, moving stages, micromixers, and grippers exhibiting high speeds with high mechanical deformability while maintaining the inherent characteristics of hydrogel phases are demonstrated. Different hydrogels can be used with the proposed actuator architecture and fabrication scheme, enabling different functionalities.