Takashi Nagao

Prof. Takashi Nagao

orcid

Research Focus & Metrics

Academic Career Length

28Years (1999-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 January 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ARAfif Navir Refani
Afif Navir Refani
TNTakashi Nagao
Takashi Nagao
Prestressed concrete piles with closed-ended circular hollow sections (spun piles) are sometimes used as foundations for pile-supported wharves. Due to a reduction in the rebar area, concrete compressive strength, yield strength of PC-bar, and bond strength between PC-bar and concrete, corrosion attacks typically lower the performance of spun piles in the marine environment. A comprehensive analysis of the corrosion effect on the mechanical properties of the spun pile materials is crucial to assess the performance of corroded spun plies. Using a three-dimensional finite element analysis (FEA), this study aimed to evaluate the impact of corrosion on the mechanical properties of the material used in spun pile construction. We simulated the effect of nonuniformly distributed corrosion products using a volumetric strain expansion over 0–75 years. The FEA results provided the stress–strain relationship of the corroded spun pile materials and the bond–slip relationship between the corroded PC-bar and concrete. We proposed equations for predicting the deterioration degree of the mechanical properties of corroded spun pile materials and compared them to those presented in previous studies. It was shown that the compressive strength of the corroded cover concrete decreased significantly after the corrosion degree reached 12%, which the previous research had not expected. The bond strength reduction was inverse exponential against the elapsed years after the corrosion degree reached 1.3%. Moreover, the yield strength of PC-bars decreased linearly with the increase in the corrosion degree.

19 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CBChristino Boyke
Christino Boyke
TNTakashi Nagao
Takashi Nagao
Pile-supported wharf (PSW) is one of the primary port structures and is often damaged by earthquakes. To mitigate the risk of seismic damage to a PSW, its seismic performance should be thoroughly assessed. This study aimed to examine the impact of ground displacement on the seismic performance of PSW with a mild soil slope. We performed soil-structure system finite element analysis targeting a wide PSW. The analysis is divided into two scenarios. In the first scenario, the PSW was modeled without regard for the soil slope, whereas the second scenario considered the soil slope. Two waveforms that matched the target spectral acceleration were used to study the effects of the waveform duration on the seismic response of PSW. The analysis results revealed substantial influences of soil slope displacement as well as differences in waveforms on PSW’s seismic performance.

12 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
CBChristino Boyke
Christino Boyke
TNTakashi Nagao
Takashi Nagao
Frame analysis (FA) is known for its efficiency and low computer resource requirements. However, compared to finite element analysis (FEA), the applicability of FA for the seismic performance assessment of pile-supported wharves (PSWs) is limited, particularly in the ability to account for the kinematic force caused by ground displacement during an earthquake. This study aimed to develop a two-dimensional FA method for PSW seismic response analysis that considers a combination of inertial and kinematic forces. We performed FA and FEA and compared the results. First, we targeted the PSW model without considering the soil slope and discussed the spectral acceleration (SA) evaluation method for calculating inertial force. As a result, an equation for estimating a damping coefficient to evaluate the SA in accordance with the PSW width and natural period was proposed. Next, we targeted the PSW model by considering the soil slope and proposed a method to evaluate the kinematic force based on the amount of ground displacement and the soil spring characteristics. The results revealed that using the proposed method, FA, by considering kinematic and inertial forces, could reproduce the bending moments of the piles comparable to those calculated using FEA. Therefore, solely considering the inertial force for a PSW on a soil slope may cause the bending moment to be underestimated.

16 August 2020 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
TNTakashi Nagao
Takashi Nagao
YFY. Fukushima
Y. Fukushima
Seismic design is the preparation for earthquake ground motions considering the seismicity and seismic amplification properties of the ground at the target site. However, the effects of source, path, and site amplification characteristics are not sufficiently anticipated in seismic codes. Regarding the source and path characteristics, earthquakes that have the strongest influence on the target site should be considered specifically, and, concerning seismic amplification, the effects of not only a shallow subsurface but also a deep subsurface should be considered. This article takes the design spectra of Japanese highway bridges as an object and compares them with the spectra produced by a ground motion prediction equation and the source- and site-specific spectra evaluated using a state-of-the-art method. The results show that the spectra differ greatly. In this way, the necessity of the application of a state-of-the-art technique in the evaluation of source, path, and site amplification characteristics is demonstrated.

3 February 2020 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
PDF file
TNTakashi Nagao
Takashi Nagao
Codes of practice and ground motion prediction equations involve ground structure proxies to account for seismic amplification. Although the ground consists of both shallow and deep subsurface, proxies are mainly related to the shallow subsurface as it is shallow subsurface information that is mostly available. However, as deep subsurface seismic amplification is not negligible, it may not be appropriate to use shallow subsurface proxies. In this study, the relationship between shallow and deep subsurface seismic amplification factors is discussed on the basis of S-wave velocity profile data from Japanese KiK-net strong-motion observation system stations. The correlation between typical proxies such as the average S-wave velocity of the top 30m of the ground surface and the seismic amplification factor was examined. Although there was a negative correlation between the two, the degree of the correlation was weak. A new proxy showing stronger correlations with the seismic amplification factor is proposed and its effectiveness is demonstrated.

11 April 2021 in Engineering, Technology & Applied Science Research
Verified
Journal Article
Open access
TNTakashi Nagao
Takashi Nagao
Since an Earthquake Ground Motion (EGM) is amplified from the propagation through the ground, different models are required for each ground type in the seismic design of structures. While the shallow subsurface indicators are used for the classification of ground types, a deep subsurface has a significant impact on the amplification of the EGMs. This study discusses the maximum credible EGMs for seismic design reflecting seismic amplification due to deep subsurface. The design spectra, reflecting the site amplification factor of the target location, are presented by the calculation of the EGMs with the same source and path characteristics and different site amplification factors as recent major Japanese earthquake records have shown, from the perspective of establishing the maximum credible EGMs that may occur in the future at a target site. The present design spectra, which are based on the natural period of a shallow subsurface, are compared with those based on the site amplification factors, considering the effect of deep subsurfaces. Although there are almost no differences in the design spectra with the present design methods according to the surface ground type, the proposed method provides significantly different design spectra for each site amplification factor.