Mi Zhang

Mrs. Mi Zhang


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 September 2018 in Materials
Verified
Journal Article
Open access
PDF file
MZMi Zhang
Mi Zhang
YGYu Gao
Yu Gao
YZYixing Zhan
Yixing Zhan
XDXiaoqing Ding
Xiaoqing Ding
MWMing Wang
Ming Wang
XWXinlong Wang
Xinlong Wang
Degradable, flame retardant, and flexible nanocomposite films with low dielectric constant were prepared with poly (lactic acid) (PLA), nano ZIF-8@GO, and degradable flame-retardant resorcinol di(phenyl phosphate) (RDP). The SEM results of the fractured surfaces indicated that ZIF-8@GO and RDP were dispersed uniformly in the PLA matrix. The prepared films had good mechanical properties and the tensile strength of the film with 1.5 wt% of ZIF-8@GO was increased to 48.2 MPa, compared with 38.5 MPa of pure PLA. Meanwhile, the nanocomposite films were flexible due to the toughing effect of RDP. Moreover, above 27.0% of limited oxygen index (LOI) and a VTM-0 rating were achieved for the nanocomposite films. The effects of nano ZIF-8@GO hybrids and RDP on the dielectric properties were investigated, and the results showed that ZIF-8@GO and RDP were beneficial in reducing the dielectric constant and dielectric loss of the nanocomposites.

13 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
SMShuangdan Mao
Shuangdan Mao
MZMi Zhang
Mi Zhang
FLFu-hua Lin
Fu-hua Lin
XLXiangyang Li
Xiangyang Li
YZYu-Ying Zhao
Yu-Ying Zhao
Bo WangBo Wang
Bo Wang
Isotactic polybutene (iPB) has a wide application in the water pipe field. However, the most valuable form I, needs 7 days to complete the transformation. In this study, the attapulgite (ATP), which produces lattice matching of the iPB form I, was selected to prepare an iPB/ATP composite. The Fischer–Tropsch wax (FTW) was grafted with maleic anhydride to obtain MAFT, and the ATP structure was reset by reactions with MAFT to the prepared FATP, which improved the interface compatibility of the ATP and iPB. The Fourier transform infrared spectroscopy (FT-IR) and the water contact angle test confirmed the successful synthesis of FATP. X-ray diffraction (XRD) verified that the graft of MAFT did not affect the crystal structure of ATP. The iPB + 5% FATP had the maximum flexural strength, which was 12.45 Mpa, and the flexural strength of the iPB + 5% FATP annealing for 1 day was much higher than others. Scanning electron microscope (SEM) photographs verified that FATP and iPB had good interface compatibility. The crystal transformation behavior indicated that the iPB + 5% FATP had the fastest crystal transformation rate, which proved that the reset structure, ATP, greatly accelerated the crystal transformation of iPB. This was a detailed study on the effect of lattice matching, interfacial compatibility and internal lubrication of the reset structure, ATP, in the nucleation and growth stages of iPB form I. The result was verified by XRD, differential scanning calorimetry (DSC), Avrami kinetics and polarizing microscope (POM) analysis.

19 May 2021 in Polymers
Verified
Journal Article
Open access
PDF file
Bo WangBo Wang
Bo Wang
SMShuangdan Mao
Shuangdan Mao
FLFu-hua Lin
Fu-hua Lin
MZMi Zhang
Mi Zhang
YZYuying Zhao
Yuying Zhao
JLJun Luo
Jun Luo
Isotactic poly (1-butene) (iPB) has excellent properties which are recognized as a green and energy saving product. However, the most stable and valuable crystal form I had a spontaneous transformation that took as long as seven days to complete. As a special solid waste, the herb residue (HR) is rich in cellulose which has great potential to accelerate the crystal transformation of the iPB. However, the polarity of HR results in the interface compatibility with non-polar iPB. In this study, the HR was modified by silane coupling agent (KH570) to obtain KHR and the iPB/HR composite was prepared. The FTIR spectrum was indicated that the organic functional groups of KH570 successfully graft onto the surface of HR and the water contact angle test was indicated that the hydrophilicity of the KHR was greatly decreased. The complete crystal transformation time is 7 days for iPB, 6 days for iPB+5% HR but only 3 days for iPB+5% KHR. The addition of the HR and KHR improve the thermal stability of the composite and this beneficial effect is more obvious for KHR. After annealing for 5 days, the physical properties value include tensile strength, flexural strength, and HDT of iPB+5% HR reach that of pure iPB after annealing for 7 days, but only 3 days for iPB+5% KHR. The TG analysis and SEM photographs give clear evidence that the beneficial effect of KH570 modified HR on improving the interface compatibility with iPB.

17 December 2023 in Polymers
Verified
Journal Article
Open access
PDF file
FLFu-hua Lin
Fu-hua Lin
MZMi Zhang
Mi Zhang
TZTian-Jiao Zhao
Tian-Jiao Zhao
YZYan-Li Zhang
Yan-Li Zhang
DNDing-Yi Ning
Ding-Yi Ning
JLJun Luo
Jun Luo
In this work, a novel α-nucleating agent (NA) for polypropylene (PP) termed APAl-3C-12Li was prepared and evaluated compared with the commercially available type NA-21. For the synthesis of the organophosphate-type NA (APAl-3C), the -OH group of the acid part of NA-21 was substituted by the isopropoxy group. The structure of APAl-3C was analyzed by spectroscopy and element analysis, the results of which were consistent with the theoretical molecular formula. APAl-3C’s thermal stability was studied by differential scanning calorimetry (DSC) and thermogravimetry (TG), which showed only weak mass loss below 230 °C, meaning that it would not decompose during the processing of PP. The APAl-3C-12Li was used as a novel nucleating agent, studying its effects on crystallization, microstructure, mechanical and optical properties. Tests were performed in a PP random copolymer at different contents, in comparison to the commercial NA-21. The composite with 0.5 wt% APAl-3C-12Li has a similar crystallization temperature of 118.8 °C as with the addition of 0.5 wt% NA-21. An advantage is that the composite with the APAl-3C-12Li has a lower haze value of 9.3% than the counterpart with NA-21. This is due to the weaker polarity of APAl-3C-12Li after the introduction of methyl and better uniform dispersion in the PP matrix, resulting in stronger improvement of optical and mechanical properties.

21 October 2022 in Polymers
Verified
Journal Article
Open access
PDF file
FLFuhua Lin
Fuhua Lin
MZMi Zhang
Mi Zhang
XLXiangyang Li
Xiangyang Li
SMShuangdan Mao
Shuangdan Mao
YWYinghui Wei
Yinghui Wei
In this work, aiming to improve the flame retardancy performance of high impact polystyrene (HIPS), HIPS compounds were synthesized with the addition of intumescent flame retardant (IFR: mass ratio of APP and PER was 3:1) and diatoms into HIPS matrix by melt blending method. It was found the IFR/diatoms system exhibited high flame retardant efficiency and catalytic carbonization effect to HIPS matrix in the burning process. The LOI value of HIPS-2 compound with the addition of 28 wt% IFR and 2 wt% diatoms was increased to 29.0% and passed V-0 rating. The value of PHRR for HIPS-2 compound is about 460.58 kW/m2 compared with 937.22 kW/m2 of pure HIPS and the value of THR for HIPS-2 compound is about 32.9 MJ/m2 compared with 62.7 MJ/m2 of pure HIPS, suggesting that the addition of IFR/diatoms system can decrease the values of PHRR and THR, which shows the synergistic effect between IFR and diatoms on reducing heat release. The 21.9% reduction in Av-EHC and 41.4% reduction in TSP seen on introducing an IFR/diatoms system indicates effective smoke suppression, which potentially would significantly reduce the death rate in real fire accidents. The TG-IR results indicated that the IFR/diatoms flame retardant system functioned in the gas phase to suppress the flame. The SEM images showed the char residue produced was more compact and continuous, which suggests that the IFR/diatoms flame retardant system exhibits barrier and catalytic effects to block heat transferring and promote char forming. The tensile strength and impact strength of HIPS-2 compound were 22.95 MPa and 2.63 KJ/m2, respectively. The tensile strength and impact strength were increased by 34.13% and 19.55% compared with that of pure HIPS.

2 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
FLFu-hua Lin
Fu-hua Lin
MZMi Zhang
Mi Zhang
SMShuangdan Mao
Shuangdan Mao
JZJianjun Zhang
Jianjun Zhang
KWKezhi Wang
Kezhi Wang
YWYinghui Wei
Yinghui Wei
In this work, a kind of aryl phosphate salt nucleating agent (APAl-12C) was synthesized, which was replaced in the hydroxyl group on the aluminum hydroxy bis [2,2′-methylene-bis(4,6-di-tert-butylphenyl) phosphate] (APAl-OH) by lauroyloxy, which could improve the dispersion between the nucleating agent and the iPP matrix and reduce the migration potential of the nucleating agent in the iPP matrix by increasing the molecular weight. The structure of the nucleating agent APAl-12C was analyzed by fourier infrared spectroscopy (FT-IR ) and 1H NMR. The differential scanning calorimeter (DSC) results indicated that the addition of APAl-OH or APAl-12C alone was inferior to the commercial nucleating agent NA-21 (compounds of APAl-OH and Lithium laurate) in terms of the crystallization behavior, which may be due to the importance of metal Li in the crystallization property. Thus, the iPP/A12C-Li composites were prepared with APAl-12C, lithium laurate (lilaurate) and the iPP matrix. The crystallization behavior, morphology, optical and mechanical properties for the iPP/A12C-Li composites were systematically studied and compared with that of the iPP/NA-21 composite. Among the iPP/A12C-Li composites with the addition of 0.5 wt%, APAl-12C/Lilaurate had the fastest crystallization rate and reduced the haze value of the neat iPP from 36.03% to 9.89% without changing the clarity, which was better than that of the iPP/NA-21 composite. This was due to the weakening of the polarity of the APAl-12C after lauroyloxy substitution and better dispersion in the iPP matrix, resulting in a significant improvement in the optical properties.