The textile industry uses the electrochemical techniques both in textile processes (such as manufacturing fibers, dyeing processes, and decolorizing fabrics) and in wastewaters treatments (color removal). Electrochemical reduction reactions are mostly used in sulfur and vat dyeing, but in some cases, they are applied to effluents discoloration. However, the main applications of electrochemical treatments in the textile sector are based on oxidation reactions. Most of electrochemical oxidation processes involve indirect reactions which imply the generation of hypochlorite or hydroxyl radical in situ. These electrogenerated species are able to bleach indigo-dyed denim fabrics and to degrade dyes in wastewater in order to achieve the effluent color removal. The aim of this paper is to review the electrochemical techniques applied to textile industry. In particular, they are an efficient method to remove color of textile effluents. The reuse of the discolored effluent is possible, which implies an important saving of salt and water (i.e., by means of the “UVEC Cell”).
The textile industry is one of the largest consumers of water in the world and its wastewater is a serious problem when it is discharged without the proper treatment. In this work, wastewater generated by textile industry was treated coupling a homogenization–decantation treatment with polyvinylidene difluoride (PVDF) ultrafiltration membranes. Initially, the wastewater was aerated in a homogenization–decantation tank where 17% colour and 10% chemical oxygen demand (COD) were removed. The aerated effluent was treated with an ultrafiltration membrane in order to reuse the permeate in new dyeing processes. Firstly, the ultrafiltration treatment was performed in a laboratory plant. The permeate analysis showed 20% colour removal and 60% COD decrease. On the basis of these results, a semi-industrial system was built. With this plant, the permeate characterization showed similar results. The system was found to be scalable and suitable for the treatment of this kind of effluents. Finally, new dyeings were performed with both permeates. Monochromatic dyeings were carried out with 100% permeate whereas 50% permeate was reused for dyeings with a mixture of three dyes. The colour differences were found to be lower than 1.5, which was the acceptance value establishedPostprint (author's final draft
The reactive dye Cibacron Yellow S-3R was selected to evaluate the feasibility of combining nanofiltration membranes with electrochemical processes to treat textile wastewater. Synthetic dyeing effluents were treated by means of two nanofiltration membranes, Hydracore10 and Hydracore50. Up to 98% of dye removal was achieved. The influence of salt concentration and pH on membrane treatment was studied. The best dye removal yield was achieved at pH 3 in the presence of 60 g/L of NaCl. After the membrane filtration, the concentrate containing high dye concentration was treated by means of an electrochemical process at three different current densities: 33, 83, and 166 mA/cm2. Results showed a lineal relationship between treatment time and applied current density. Both permeates and electrochemically-decoloured effluents were reused in new dyeing processes (100% of permeate and 70% of decoloured concentrates). Dyed fabrics were evaluated with respect to original dyeing. Colour differences were found to be into the acceptance range.