Fixation screws and other temporary magnesium alloy fixation devices are used in orthopedic practice because of their biodegradability, biocompatibility and acceptable biodegradation rates. The substitution of dissolving implant by tissues during the healing process is one of the main requirements for biodegradable implants. Previously, clinical tests showed the effectiveness of Ga ions on bone tissue regeneration. This work is the first systematic study on the corrosion rate and biocompatibility of Mg–Zn–Ga–(Y) alloys prepared by hot extrusion, where Ga is an additional major alloying element, efficient as a bone-resorption inhibitor. Most investigated alloys have a low corrosion rate in Hanks’ solution close to ~0.2 mm/year. No cytotoxic effects of Mg–2Zn–2Ga (wt.%) alloy on MG63 cells were observed. Thus, considering the high corrosion resistance and good biocompatibility, the Mg–2Zn–2Ga alloy is possible for applications in osteosynthesis implants with improved bone tissue regeneration ability.
In the present study, pins made from the novel Mg-2Zn-2Ga alloy were installed within the femoral bones of six Wistar rats. The level of bioresorption was assessed after 1, 3, and 6 months by radiography, histology, SEM, and EDX. Significant bioresorption was evident after 3 months, and complete dissolution of the pins occurred at 6 months after the installation. No pronounced gas cavities could be found at the pin installation sites throughout the postoperative period. The animals’ blood parameters showed no signs of inflammation or toxication. These findings are sufficiently encouraging to motivate further research to broaden the experimental coverage to increase the number of observed animals and to conduct tests involving other, larger animals.
The development direction of bioresorbable fixing structures is currently very relevant because it corresponds to the priority areas in worldwide biotechnology development. Magnesium (Mg)-based alloys are gaining high levels of attention due to their promising potential use as the basis for fixating structures. These alloys can be an alternative to non-degradable metal implants in orthopedics, maxillofacial surgery, neurosurgery, and veterinary medicine. In our study, we formulated a Mg-2Zn-2Ga alloy, prepared pins, and analyzed their biodegradation level based on SEM (scanning electron microscopy) and EDX (energy-dispersive X-ray analysis) after carrying out an experimental study on rats. We assessed the resorption parameters 1, 3, and 6 months after surgery. In general, the biodegradation process was characterized by the systematic development of newly formed bone tissue. Our results showed that Mg-2Zn-2Ga magnesium alloys are suitable for clinical applications.
An urgent issue is the preservation or reconstruction of the volume of bone tissue in planning and surgical treatment in the fields of medicine, such as traumatology, orthopedics, maxillofacial surgery and dentistry. After tooth extraction, resorption of the bone tissue of the alveolar crest of the jaws occurs, which must either be further eliminated by performing additional operations or using osteoplastic material for socket preservation at the extraction stage. Background and Objectives: The aim of the study was a comparative analysis of various osteoplastic materials used to preserve the volume of bone tissue in the preimplantation period. Materials and Methods: As part of the study, 80 patients were treated, who underwent socket preservation using xenografts, plasma enriched with growth factors, an autologous dentin matrix (ADM) and hydroxyapatite. Results: The results of the treatment 16 weeks after removal were comprehensively analyzed using a morphometric analysis of the bone’s volume, cone beam tomography and morphological examination of burr biopsy specimens, as well as by determining the stability of the installed implant at different stages of treatment. Conclusions: The lowest level of bone tissue resorption according to the CBCT data was noted in the ADM and xenograft groups. It should be noted that the use of osteoplastic material in jaw surgery when reconstructing alveolar defects is an essential procedure for preventing the atrophy of bone tissue.
2 April 2021 in Traumatology and Orthopedics of Russia
Background. Currently, using of osteointegrated titanium implants has become a key component for restoring lost function in various areas of clinical medicine. The actual issue remains preservation or reconstruction of bone tissue for optimal use of titanium implants in traumatology and orthopedics, as well as in maxillofacial surgery. One of the most common grafts are hydroxyapatite-based material with various inclusions, for example, an antibiotic.The aim of the study is to characterize the regeneration of bone tissue of the jaws alveolar ridge using the hydroxyapatite-based material “Collapan-L” in clinical practice.Material and Methods. The study of the material “Collapan-L” (Intermedapatit, Russia) using involved 30 patients with a diagnosis “chronic periodontitis of the tooth”. Patients underwent complex surgical and orthopedic treatment to restore masticatory function. At the first stage, teeth were removed with the “Collapan-L” material used to preserve the alveolus. 4 months after extraction, dental implantation was performed with simultaneous trephine biopsy from the augmentation zone for histomorphometric analysis. At the stage of implant placement and before prosthetics the stability dynamics was measured.Results. The study involved 42 tissue samples obtained at periods from 9 to 32 weeks after removal. The morphological assessment of bone tissue from the implantation zone determined that after 4 months trabeculae from the newly formed bone, including small fragments of biomaterial, were revealed; at the same time, there were signs of biodegradation of the implanted material fragments, there was no inflammatory infiltrate. After 6 months in a significant part of cases the granules of bone material were not found, which indicates a pronounced osseointegration of the material. In its structure, the formed bone tissue differences barely noticeable from the native one, which allows us to conclude that by the time of 24 weeks, the processes of reparative osteogenesis in the alveolus are completed.Conclusion. Histological examination and assessment of changes in the stability showed that using of bone replacement material after tooth extraction can increase the regenerative potential of bone tissue, avoid additional surgical interventions to increase the volume of bone tissue in the area of future implantation, and the formed bone tissue is close in its structure to the native one.
Dental implantation in the area of previously lost teeth is a modern way to rehabilitate edentulous patients. The search for osteoplastic materials and methods of preimplantation osteoplasty remains topical. One of these materials is an autogenous dentin matrix (ADM), which is based on a crushed extracted tooth. ADM production and application technologies are different and insufficiently tested. Nevertheless, the application of this technique may open up new clinical possibilities. The study on the use of ADM involved 20 patients from 18 to 65 years old. The patients underwent complex surgical and orthopedic treatment to restore chewing function. At the first stage, the extraction of teeth was performed with the simultaneous preservation of the socket of the extracted tooth ADM. The second stage was carried out 3-4 months later, which included the collection of bone biopsy specimen and subsequent dental implantation in the area of the previously extracted tooth. 42 specimens obtained 12-17 weeks after removal were subjected to histological examination. According to its structure, the bone tissue formed in the hole is reticulofibrous bone. Which allows us to conclude that by the time of 15-17 weeks, the processes of active reparative bone formation in the hole are completed, and the necessary local conditions for dental implantation have been created.