Background: Little is known on accuracy comparisons among 3D-printing trueness and precision to produce dental models. The purpose of this study was to investigate the accuracy of different 3D-printing technologies (SLA; DLP; LCD poly and monochromatic; and Polyjet). Methods: Fifteen models were manufactured by the five different 3D printers used in this study. The manufactured models were physically measured in the corresponding lengths for trueness and reproducibility. Means and standard deviations were obtained for the five computer-aided manufacturing (CAM) methods and compared. Results: No significant difference was found in the comparison between observers in all measurements performed with the different model algorithms. Pairwise Wilcoxon non-parametric test comparisons of trueness between 3D-printers revealed statistically significant differences between Stratasys versus Anycubic (p = 0.025) and Anycubic versus Form 2 (p = 0.048). Conclusion: The present findings suggest that the 3D-printing methods may have small significant discrepancies when compared to the original digital files, which may not be clinically relevant. In addition, there were no significant discrepancies among median measurements of each printing method (within 3D-printer analysis), which suggests that, for dental casts, all of the studied devices performed similarly.
The success of temporary restorations depends on their marginal and internal adaptation, which are influenced by the manufacturing method. This study evaluated the intaglio surface accuracy, internal fit, and marginal fit of provisional crowns fabricated via subtractive (milling) and additive (3D printing) CAD/CAM technologies. Three milling systems—CEREC Primemill (4-axis), PrograMill Dry (5-axis), and Zirkonzahn M1 (5-axis)—and three 3D printers—Phrozen Mini 4K (LCD), SprintRay Pro95S (DLP), and Stratasys Objet30 (PolyJet)—were evaluated. For 3D printing, five build orientations (0°, 30°, 45°, 60°, and 90°) were tested. A total of 360 crowns were fabricated. Accuracy was quantified by Root Mean Square (RMS) deviation, and fit was assessed using the triple-scan method. Results indicated that build angles of 0° and 30° yielded the best performance for printed crowns (p < 0.05). While milling systems showed significantly superior intaglio accuracy and marginal fit compared to 3D printing (p < 0.05), no significant differences were found in internal fit between the two methods (p > 0.05). Milling offers higher dimensional predictability, but both approaches are clinically viable when optimized parameters are utilized.