Background: Little is known on accuracy comparisons among 3D-printing trueness and precision to produce dental models. The purpose of this study was to investigate the accuracy of different 3D-printing technologies (SLA; DLP; LCD poly and monochromatic; and Polyjet). Methods: Fifteen models were manufactured by the five different 3D printers used in this study. The manufactured models were physically measured in the corresponding lengths for trueness and reproducibility. Means and standard deviations were obtained for the five computer-aided manufacturing (CAM) methods and compared. Results: No significant difference was found in the comparison between observers in all measurements performed with the different model algorithms. Pairwise Wilcoxon non-parametric test comparisons of trueness between 3D-printers revealed statistically significant differences between Stratasys versus Anycubic (p = 0.025) and Anycubic versus Form 2 (p = 0.048). Conclusion: The present findings suggest that the 3D-printing methods may have small significant discrepancies when compared to the original digital files, which may not be clinically relevant. In addition, there were no significant discrepancies among median measurements of each printing method (within 3D-printer analysis), which suggests that, for dental casts, all of the studied devices performed similarly.
Despite the advent of stereolithography in craniofacial surgery for creating surgical guides and custom synthetic scaffolds, little is known about the feasibility of computer-aided design/computer-aided manufacturing (CAD/CAM) milling of freeze-dried allogeneic bone blocks following previously designed volumetric graft plans. The aim of this technical report is to present a methodology for CAD/CAM milling to achieve the volume and shape of allogeneic bone blocks as estimated by using a virtual planning software. To perform the current methodology, an ex vivo simulation was performed. The milled allogeneic block presented satisfactory dimensional accuracy as compared with the respective three-dimensional virtual model.
14 April 2022 in The Journal of Prosthetic Dentistry