Recent intensive and extensive development of the fifth-generation (5G) of cellular networks has led to their deployment throughout much of the world. As part of this implementation, one of the challenges that must be addressed is the skip-zone problem, which occurs when objects such as trees, people, animals, and vehicles obstruct the transmission of signals. In free-space optical (FSO) and radio frequency (RF) systems, dead zones are most often caused by buildings and trees, while in visible light communications (VLC), obstructions are caused by individuals moving around a room or objects placed in the room. A signal obstruction can significantly reduce the signal-to-noise ratio in RF and indoor VLC systems, whereas in FSO systems, where the transmitted signals are directional, the obstruction can completely disrupt data transmission. Therefore, the skip-zone dilemma must be resolved to ensure the smooth and efficient operation of 5G and beyond networks. By placing a relay between a transmitter and a receiver, the effects of obstacles can be mitigated. As a result, the signal from the transmitter will reach the receiver. In recent years, reconfigurable intelligent surfaces (RISs) that are more efficient than relays have become widely accepted as a method of mitigating skip-zones and providing reconfigurable radio environments. However, there have been limited studies on RISs for optical wireless communication (OWC) systems. Through the RIS technology, OWC and RF communication channels can be reconfigured. This paper aims to provide a comprehensive tutorial on indoor VLC systems utilizing RIS technology. The article discusses the basics of VLC and RISs and reintroduces RISs for OWC systems, focusing on RIS-assisted indoor VLC systems. We also provide a comprehensive overview of optical RISs and examine the differences between optical RISs, RF-RISs, and optical relays. Furthermore, we discuss in detail how RISs can be used to overcome line-of-sight blockages and the device orientation issue in VLC systems while revealing key challenges such as RIS element orientation design, RIS elements to access point/user assignment design, and RIS array positioning design problems that need to be studied. Moreover, we discuss and propose several research problems on integrating optical RISs with other emerging technologies, including non-orthogonal multiple access, multiple-input multiple-output systems, physical layer security, and simultaneous lightwave and power transfer in VLC systems. Finally, we highlight other important research directions that can further improve the performance of RIS-assisted VLC systems.

This letter explores the use of intelligent reflecting surfaces (IRSs) to address the line-of-sight (LoS) blockage issue in an indoor visible light communication (VLC) system. This is done while considering practical user behaviors such as random receiver orientation and the presence of obstructions in the direct link between the transmitter and the receiver. Specifically, a system model for an IRS-aided VLC system is proposed and a rate maximization problem is considered to determine the optimal orientation of the IRS mirror array to establish robust non-LoS links. A low-complexity iterative solution based on the sine-cosine algorithm is proposed for this non-convex optimization problem. Simulation results are used to verify the effectiveness of the proposed IRS-aided VLC system design and optimization algorithm in overcoming the LoS blockage issue.

In this letter, we investigate the use of active elements in reconfigurable intelligent surfaces (RIS) to overcome the double-fading problem introduced in the RIS-aided link in a wireless communications system. Towards this end, each active RIS element amplifies the reflected incident signal rather than only reflecting it has done in passive RIS modules. As revealed in our analysis and simulation, the use of active elements leads to a drastic reduction in the size of RIS to achieve a given performance level. Furthermore, a practical design for active RIS is proposed.

Visible light communication (VLC) enables access to huge unlicensed bandwidth, a higher security level, and no radio frequency interference. With these advantages, VLC emerges as a complementary solution to radio frequency communications. VLC systems have primarily been designed for indoor scenarios with typical transmission distances between 2 and 5 m. Different designs would be required for larger distances. This article proposes for the first time, the use of a liquid crystal (LC)-based re-configurable intelligent surface (RIS) for improving the VLC signal detection and transmission range. An LC-based RIS presents multiple advantages, including the tunability of its photo-refractive parameters. Another advantage is its light amplification capabilities when under the influence of an externally applied field. In this article, we analyze an LC-based RIS structure to amplify the detected light and improve the VLC signal detection and transmission range. Results show that mixing LC with 4 to 8 wt% concentration of a dye such as the terthiophene (3T-2 MB) improves the VLC transmission range of about 0.20 to 1.08 m. This improvement can reach 6.56 m if we combine 8 wt% concentration of 3T-2 MB and 0.1 wt% concentration of trinitrofluorenone.

One of the main problems faced by communication systems is the presence of skip-zones in the targeted areas. With the deployment of the fifth-generation mobile network, solutions are proposed to solve the signal loss due to obstruction by buildings, mountains, and atmospheric or weather conditions. Among these solutions, reconfigurable intelligent surfaces (RIS), which are newly proposed modules, may be exploited to reflect the incident signal in the direction of dead zones, increase communication coverage, and make the channel smarter and controllable. This paper tackles the skip-zone problem in terrestrial free-space optical (T-FSO) systems using a single-element RIS. Considering link distances and jitter ratios at the RIS position, we carry out a performance analysis of RIS-aided T-FSO links affected by turbulence and pointing errors, for both heterodyne detection and intensity modulation-direct detection techniques. Turbulence is modeled using the Gamma-Gamma distribution. We analyze the model and provide exact closed-form expressions of the probability density function, cumulative distribution function, and moment generating function of the end-to-end signal-to-noise ratio. Capitalizing on these statistics, we evaluate the system performance through the outage probability, ergodic channel capacity, and average bit error rate for selected binary modulation schemes. Numerical results, validated through simulations, obtained for different RIS positions and link distances ratio values, reveal that RIS-based T-FSO performs better when the RIS module is located near the transmitter.

In the design of reconfigurable intelligent surfaces (RISs)-aided visible light communication (VLC) systems, most studies have focused on the deployment of mirror arrays and metasurfaces on walls to influence signal propagation and enhance communication performance. This paper provides a new research direction in the design and performance optimization of RIS-aided VLC systems whereby voltage-controlled tunable liquid crystals (LCs) are deployed as part of the VLC receiver. The purpose of the LC RIS is to provide incident light steering and intensity amplification in order to improve the received signal strength and the corresponding achievable data rate. More specifically, an LC RIS-based VLC receiver design is proposed and its operating principles and the channel model for a VLC system with such a receiver are provided. Since the refractive index of the LC RIS plays a critical role in the wave-guiding and light amplification capabilities of this novel receiver, a rate maximization problem is considered to achieve the optimal refractive index and the required voltage to obtain the best light amplification and data rate performances. This communication design problem is a non-convex optimization problem for which a metaheuristic approach is developed based on the sine-cosine algorithm. Simulation results are used to confirm the considerable data rate improvement by the proposed LC RIS-based VLC receiver and optimization algorithm when compared to a VLC receiver without the LC RIS and a baseline scheme, respectively.