Recent intensive and extensive development of the fifth-generation (5G) of cellular networks has led to their deployment throughout much of the world. As part of this implementation, one of the challenges that must be addressed is the skip-zone problem, which occurs when objects such as trees, people, animals, and vehicles obstruct the transmission of signals. In free-space optical (FSO) and radio frequency (RF) systems, dead zones are most often caused by buildings and trees, while in visible light communications (VLC), obstructions are caused by individuals moving around a room or objects placed in the room. A signal obstruction can significantly reduce the signal-to-noise ratio in RF and indoor VLC systems, whereas in FSO systems, where the transmitted signals are directional, the obstruction can completely disrupt data transmission. Therefore, the skip-zone dilemma must be resolved to ensure the smooth and efficient operation of 5G and beyond networks. By placing a relay between a transmitter and a receiver, the effects of obstacles can be mitigated. As a result, the signal from the transmitter will reach the receiver. In recent years, reconfigurable intelligent surfaces (RISs) that are more efficient than relays have become widely accepted as a method of mitigating skip-zones and providing reconfigurable radio environments. However, there have been limited studies on RISs for optical wireless communication (OWC) systems. Through the RIS technology, OWC and RF communication channels can be reconfigured. This paper aims to provide a comprehensive tutorial on indoor VLC systems utilizing RIS technology. The article discusses the basics of VLC and RISs and reintroduces RISs for OWC systems, focusing on RIS-assisted indoor VLC systems. We also provide a comprehensive overview of optical RISs and examine the differences between optical RISs, RF-RISs, and optical relays. Furthermore, we discuss in detail how RISs can be used to overcome line-of-sight blockages and the device orientation issue in VLC systems while revealing key challenges such as RIS element orientation design, RIS elements to access point/user assignment design, and RIS array positioning design problems that need to be studied. Moreover, we discuss and propose several research problems on integrating optical RISs with other emerging technologies, including non-orthogonal multiple access, multiple-input multiple-output systems, physical layer security, and simultaneous lightwave and power transfer in VLC systems. Finally, we highlight other important research directions that can further improve the performance of RIS-assisted VLC systems.

In this letter, we investigate the use of active elements in reconfigurable intelligent surfaces (RIS) to overcome the double-fading problem introduced in the RIS-aided link in a wireless communications system. Towards this end, each active RIS element amplifies the reflected incident signal rather than only reflecting it has done in passive RIS modules. As revealed in our analysis and simulation, the use of active elements leads to a drastic reduction in the size of RIS to achieve a given performance level. Furthermore, a practical design for active RIS is proposed.

This letter explores the use of intelligent reflecting surfaces (IRSs) to address the line-of-sight (LoS) blockage issue in an indoor visible light communication (VLC) system. This is done while considering practical user behaviors such as random receiver orientation and the presence of obstructions in the direct link between the transmitter and the receiver. Specifically, a system model for an IRS-aided VLC system is proposed and a rate maximization problem is considered to determine the optimal orientation of the IRS mirror array to establish robust non-LoS links. A low-complexity iterative solution based on the sine-cosine algorithm is proposed for this non-convex optimization problem. Simulation results are used to verify the effectiveness of the proposed IRS-aided VLC system design and optimization algorithm in overcoming the LoS blockage issue.

Security and latency are crucial aspects in the design of future wireless networks. Physical layer security (PLS) has received a growing interest from the research community in recent years for its ability to safeguard data confidentiality without relying on key distribution or encryption/decryption, and for its latency advantage over bit-level cryptographic techniques. However, the evolution towards the fifth generation (5G) technology and beyond poses new security challenges that must be addressed in order to fulfill the unprecedented performance requirements of future wireless communication networks. Among the potential key-enabling technologies, reconfigurable intelligent surface (RIS) has attracted extensive attention due to its ability to proactively and intelligently reconfigure the wireless propagation environment to combat dynamic wireless channel impairments. Consequently, the RIS technology can be adopted to improve the information-theoretic security of both radio frequency (RF) and optical wireless communications (OWC) systems. It is worth noting that the configuration of RIS in RF communications is different from the one in optical systems at many levels (e.g., RIS materials, signal characteristics, and functionalities). This survey paper provides a comprehensive overview of the information-theoretic security of RIS-based RF and optical systems. The article first discusses the fundamental concepts of PLS and RIS technologies, followed by their combination in both RF and OWC systems. Subsequently, some optimization techniques are presented in the context of the underlying system model, followed by an assessment of the impact of RIS-assisted PLS through a comprehensive performance analysis. Given that the computational complexity of future communication systems that adopt RIS-assisted PLS is likely to increase rapidly as the number of interactions between the users and infrastructure grows, machine learning (ML) is seen as a promising approach to address this complexity issue while sustaining or improving the network performance. A discussion of recent research studies on RIS-assisted PLS-based systems embedded with ML is presented. Furthermore, some important open research challenges are proposed and discussed to provide insightful future research directions, with the aim of moving a step closer towards the development and implementation of the forthcoming sixth-generation (6G) wireless technology.

This letter investigates a reconfigurable intelligent surfaces (RIS)-aided wireless communication system in an inband underlay Device-to-Device (D2D) communication, where the direct link between D2D users is unavailable. An RIS is used to adjust its reflecting elements to enhance the D2D communication data transmission while improving the cellular network's secrecy performance concurrently. Specifically, analytical results for the secrecy outage probability and the probability of non-zero secrecy capacity are derived for the cellular network. Moreover, the D2D outage probability is also provided. Simulation and analytical results are presented to verify the derived expressions' correctness and the effectiveness of the proposed scenario. Moreover, the asymptotic results are presented.

Visible light communication (VLC) enables access to huge unlicensed bandwidth, a higher security level, and no radio frequency interference. With these advantages, VLC emerges as a complementary solution to radio frequency communications. VLC systems have primarily been designed for indoor scenarios with typical transmission distances between 2 and 5 m. Different designs would be required for larger distances. This article proposes for the first time, the use of a liquid crystal (LC)-based re-configurable intelligent surface (RIS) for improving the VLC signal detection and transmission range. An LC-based RIS presents multiple advantages, including the tunability of its photo-refractive parameters. Another advantage is its light amplification capabilities when under the influence of an externally applied field. In this article, we analyze an LC-based RIS structure to amplify the detected light and improve the VLC signal detection and transmission range. Results show that mixing LC with 4 to 8 wt% concentration of a dye such as the terthiophene (3T-2 MB) improves the VLC transmission range of about 0.20 to 1.08 m. This improvement can reach 6.56 m if we combine 8 wt% concentration of 3T-2 MB and 0.1 wt% concentration of trinitrofluorenone.