Oil spills in the Arctic are becoming more likely as shipping traffic increases in response to climate-related sea ice loss. To improve oil spill detection capability, we used a controlled mesocosm to analyze the multipolarized C-band backscatter response of oil in newly formed sea ice (NI). Artificial sea ice was grown in two cylindrical tubs at the Sea-ice Environmental Research Facility, University of Manitoba. The sea ice physical characteristics, including surface roughness, thickness, temperature, and salinity, were measured before and after oil injection below the ice sheet. Time-series C-band radar backscatter measurements detected the differences in the sea ice evolution and oil migration to the sea ice surface in the oil-contaminated tub, which was compared to uncontaminated ice in a control tub. Immediately prior to the presence of oil on the ice surface, the copolarized backscatter is increased by 13-dB local maximum, while the cross-polarized backscatter is decreased by 9-dB. Ice physical properties suggest that the local backscatter maximum and minimum, which occurred immediately before oil migrated onto the surface, were related to a combination of brine and oil upward migration. The findings of this work provide a baseline data interpretation for oil detection in the Arctic Ocean using current and future C-band multipolarization radar satellites.
Climate-driven sea ice loss has exposed the Arctic to increased human activity, which comes along with a higher risk of oil spills. As a result, we investigated the ability of C-band polarimetric parameters in a controlled mesocosm to accurately identify and discriminate between oil-contaminated and uncontaminated newly-formed sea ice (NI). Parameters such as total power, copolarization ratio, copolarization correlation coefficient, and others were derived from the normalized radar cross-section and covariance matrix to characterize the temporal evolution of NI before and after oil spill events. For separation purposes, entropy ( H ) and mean-alpha (α) were extracted from eigen decomposition of the coherency matrix. The H versus α scatterplot revealed that a threshold classifier of 0.3- H and 18°-α could distinguish oil-contaminated NI from its oil-free surroundings. From the temporal evolution of the polarimetric parameters, the results demonstrate that the copolarization correlation coefficient is the most reliable polarimetric parameter for oil spill detection, as it provides information on a variety of oil spill scenarios, including oil-encapsulated within ice, and oil spreading on top of ice. Overall, these findings will be used to support existing and future C-band polarimetric radar satellites for resolving ambiguities associated with Arctic oil spill events, particularly during freeze-up seasons.
The risk of oil spills in the Arctic is growing rapidly as anthropogenic activities increase due to climate-driven sea ice loss. Detecting and monitoring fuel spills in the marine environment is imperative for enacting an efficient response to mitigate the risk. Microwave radar systems can be used to address this issue; therefore, we examined the potential of C-band polarimetric radar for detecting diesel fuel in freezing seawater under windy environmental conditions. We present results from a mesocosm experiment, where we introduced diesel fuel to a seawater-filled cylindrical tub at the Sea-ice Environmental Research Facility (SERF), University of Manitoba. We characterized the temporal evolution of the diesel-contaminated seawater and sea ice by monitoring the normalized radar cross section (NRCS) and polarimetric parameters (i.e., copolarization ratio (Rco), cross-polarization ratio (Rxo), entropy (H), mean-alpha (α), conformity coefficient (μ), and copolarization correlation coefficient (ρco)) at 20° and 25° incidence angles. Three stages were identified, with notably different NRCS and polarimetric results, related to the thermophysical conditions. The transition from calm conditions to windy conditions was detected by the 25° incidence angle, whereas the transition from open water to sea ice was more apparent at 20°. The polarimetric analysis demonstrated that the conformity coefficient can have distinctive sensitivities to the presence of wind and sea ice at different incidence angles. The H versus α scatterplot showed that the range of distribution is dependent upon wind speed, incidence angle, and oil product. The findings of this study can be used to further improve the capability of existing and future C-band dual-polarization radar satellites or drone systems to detect and monitor potential diesel spills in the Arctic, particularly during the freeze-up season.
8 January 2024 in IEEE Transactions on Geoscience and Remote Sensing
Oil thickness in oil spills involving sea ice is a key parameter required for an effective oil spill response; however, quantifying it from radar backscatter data remains a difficult task. We investigated a possible solution for estimating oil slick thickness by using electromagnetic (EM) forward and inverse scattering models of oil-covered newly formed sea ice (NI). Our forward model employs a first-order approximation of a multilayered small perturbation method (SPM) to predict two copolarization C-band radar backscatters of NI covered by an oil slick with thicknesses ranging from 0 to 7 mm. The results showed that the backscatter decreases as slick thickness increases, which we attributed to signal attenuation within the saline-oil layer. Our inverse model relies on the particle swarm optimization (PSO) algorithm to determine the slick thickness on NI using synthetic backscatter data, and it requires the input of several important ice and oil physical parameters (thickness, dielectrics, and roughness). Moreover, the estimated slick thickness was validated using scatterometer data from an oil-on-ice experiment at the University of Manitoba’s Sea-ice Environmental Research Facility (SERF). With synthetic data, the 5 mm oil slick thickness was overestimated by 25%, while with experimental data, it was overestimated by 8%. Overall, our findings have laid the groundwork for future inversion studies to identify the thickest oil spill zone from current and future C-band radar satellites for immediate response.
There is a heightened risk of an oil spill occurring in the Arctic, as climate change driven sea ice loss permits an increase in Arctic marine transportation. The ability to detect an oil spill and monitor its progression is key to enacting an effective response. Microwave scatterometer systems may be used detect changes in sea ice thermodynamic and physical properties, so we examined the potential of C-band polarimetric radar for detecting diesel fuel beneath a thin sea ice layer. Sea ice physical properties, including thickness, temperature, and salinity, were measured before and after diesel addition beneath the ice. Time-series polarimetric C-band scatterometer measurements monitored the sea ice evolution and diesel migration to the sea ice surface. We characterized the temporal evolution of the diesel-contaminated seawater and sea ice by monitoring the normalized radar cross section (NRCS) and polarimetric parameters (conformity coefficient (μ), copolarization correlation coefficient (ρco)) at 20° and 25° incidence angles. We delineated three stages, with distinct NRCS and polarimetric results, which could be connected to the thermophysical state and the presence of diesel on the surface. Stage 1 described the initial formation of sea ice, while in Stage 2, we injected 20L of diesel beneath the sea ice. No immediate response was noted in the radar measurements. With the emergence of diesel on the sea ice surface, denoted by Stage 3, the NRCS dropped substantially. The largest response was for VV and HH polarizations at 20° incidence angle. Physical sampling indicated that diesel emerged to the surface of the sea ice and trended towards the tub edge and the polarimetric scatterometer was sensitive to these physical changes. This study contributes to a greater understanding of how C-band frequencies can be used to monitor oil products in the Arctic and act as a baseline for the interpretation of satellite data. Additionally, these findings will assist in the development of standards for oil and diesel fuel detection in the Canadian Arctic in association with the Canadian Standards Association Group.