Tien Trung Vũ

Prof. Dr. Tien Trung Vũ


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 March 2023 in Mining of Mineral Deposits
Verified
Journal Article
Open access
TVTien Trung Vũ
Tien Trung Vũ
SDSon Anh Do
Son Anh Do
Purpose. It is important to conduct a study to identify the displacement zone caused by mining operations. By numerical modeling the process of mining the longwall 31104 in Seam 11 at the Nui Beo Coal Mine, Vietnam, the authors have deter-mined the total height of the rock mass displacement zone and the boundary of the affected area on the topographic surface. Methods. In this study, the authors use a numerical modeling method. The models are developed based on the UDEC (Universal Distinct Element Code) software. In addition, field survey methods and statistical analysis methods are used. Findings. Based on the analysis of the numerical modeling results, it has been determined that the total height of the displacement zone, when exploiting the longwall 31104 in Seam 11, is about 63 m. The analysis of the numerical modeling results also shows that the roof collapse angle is 52°, which determines the area of influence on the topographic surface in the range of 160 m. Originality. Based on the UDEC software, the authors have developed a simulation model for the mining process of the longwall 31104 in Seam 11. Analysis of the model results has shown the state of the displacement zone of the surrounding rock mass. In this study, the numerical modeling method is applied to simulate the longwall displacement zone, which is consistent with the actual production of the underground mine. Practical implications. Based on the analysis of the surrounding rock mass displacements zone, when exploiting the longwall 31104 in Seam 11 at the Nui Beo Coal Mine, the affected boundary on the topographic surface has been determined. At the same time, the height of the rock mass displacement zone has also been calculated. Thus, the research results can be used as a basis for implementation in actual production at the Nui Beo Coal Mine.

30 June 2025 in Engineering Journal of Satbayev University
Verified
Journal Article
Open access
PDF file
CNC.H. Nguyen
C.H. Nguyen
TVTien Trung Vũ
Tien Trung Vũ
DLD.T. Le
D.T. Le
SDS.A. Do
S.A. Do
CDC.V. Dao
C.V. Dao
PLP.Q. Le
P.Q. Le
Ventilation for underground mines plays an essential role in production activities by ensuring labor safety and maintaining environmental conditions. Mine ventilation is also one of the most effective methods for preventing methane gas and coal dust explosions. Therefore, it is necessary to investigate the ventilation network annually and calculate the overall ventilation requirements for underground mines in the Quang Ninh coalfield. Based on the production plan and ventilation needs of the Khe Cham Coal Mine, the authors surveyed and evaluated the mine ventilation network, thereby proposing solutions to improve the ventilation system and calculating the ventilation parameters for 2025. To achieve the research results presented in this article, the authors used methods such as data collection, analysis and synthesis, field surveys, result analysis and evaluation, combined with numerical modeling using ventilation software to verify calculation results. To ensure ventilation for Khe Cham Coal Mine in 2025, two main fan stations – №1 at level +35 and №2 at level +112 should be operated jointly, with the following calculated working modes: fan station №1 at level +35: airflow of 193.72 m³/s, air pressure of 448 mmH₂O, impeller angle of 40°; fan station №2 at level +112: airflow of 155.8 m³/s, air pressure of 419.5 mmH₂O, impeller angle of 35°. Based on the analysis of data collected at the Khe Cham Coal Mine, the paper assesses the overall ventilation status of the mine. It proposes solutions to improve the ventilation network, ensuring safety during production activities. Additionally, it determines the combined working mode of the two main fan stations, providing a foundation for developing the general ventilation plan for Khe Cham Coal Mine in 2025.

30 December 2025 in Mining of Mineral Deposits
Verified
Journal Article
Closed access
PLPhuc Le
Phuc Le
TVTien Trung Vũ
Tien Trung Vũ
Purpose. The stability of the lower coal seam roadway under the condition of close coal seams is a key issue in underground mining, mainly when the roadway is located under the coal pillar of the upper seam. This paper analyzes the stress distribution rule under the coal pillar to determine the reasonable location of the roadway in the lower seam at Thong Nhat Coal Mine, Vietnam. Methods. Numerical simulation model using FLAC3D software was conducted to investigate the distribution and redistribution of stress under the coal pillar and the goaf area, considering vertical-horizontal stress, physical parameters of rock and actual boundary conditions. Findings. Four different roadway layout locations were assumed for comparison: Under the center of the pillar (A), under the edge of the pillar (B, C) and in the floor area under the goaf (D). The results showed that the highest stress concentration was at location A, with a concentration coefficient of 2.4-2.7 times the initial stress, creating a high risk of instability. Locations B and C had lower stresses but were still strongly affected by the pillar load. In contrast, location D showed a significantly lower and uniform stress distribution, and a small plastic zone development range, which was favorable for maintaining roadway stability. Originality. The choice of roadway location is decisive for the safety and longevity of the project. In the geological conditions at Thong Nhat Coal Mine, arranging the roadway in the floor area under the goaf outside the coal pillar with a horizontal distance of 5m (location D) is the most reasonable and safest. At the same time, it is necessary to avoid arranging the roadway directly under the coal pillar. Practical implications. The research results provide a scientific and practical basis for design work, improving stability, reducing maintenance costs and ensuring safety in underground mines with close coal seams.

1 October 2023 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
SPS Pysmennyi
S Pysmennyi
SCS Chukharev
S Chukharev
APA Peremetchyk
A Peremetchyk
NSN Shvaher
N Shvaher
SFS Fedorenko
S Fedorenko
TVTien Trung Vũ
Tien Trung Vũ
In mining iron ore, over 60% of underground mines at Kryvyi Rih iron ore basin apply a system with the bulk caving of ore and overlying rocks. However, when the deposit dip is 45-60 degrees, application of this mining system leads to losses of about 30-40% of the footwall ore. Available methods of the loss reduction result in an increase in production costs or a decrease in the iron content in the mined ore mass. After analyzing the mechanism of forming the figure of drawing, it is proposed to change its parameters without significant costs due to the use of an inclined plane and an overcompacted ore layer. The presented study enables stating that with an increase in the inclined plane angle from 45 to 75 degrees the draw crater radius increases from 2 to 7.5 m, and a decrease in the factor of first loosening of ore leads to an increase in the radius of the crater to 10 m. Thus, for the first time it is proved that a decrease in the first loosening factor leads to the increased semi-minor axis of the ellipsoid of drawing and the width of the active drawing area, which will reduce losses of caved ore when drawing it from the stoping block in the footwall area. It is established that in order to minimize losses and dilution of ore when using level mining systems, the drawpoint should be located in the block sill at a distance ensuring formation of the 20 to 25 m high ellipsoid of drawing. In case of an overcompacted 22 m thick ore layer, it is possible to significantly reduce ore losses from 14 to 10% and ore dilution from 16 to 9%, thereby enhancing ore mass extraction indices without additional costs.

30 April 2023 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Verified
Journal Article
Closed access
TVTien Trung Vũ
Tien Trung Vũ
HPHung Duc Pham
Hung Duc Pham
Purpose. Coal mining activities by underground mining method will disrupt the equilibrium of the surrounding rock mass. In underground mining, determining the influence zone of exploiting the longwall on the topographic surface is extremely important.Through analyzing the displacement and deformation of the rock mass when exploiting the longwall 21103 in Seam 11 at Nui Beo Coal Mine, the influence is to be determined of exploiting this longwall on the topographic surface in order to forecast the boundary of the influence zone that may affect the surface works, ensuring the safety of such works. Methodology. To achieve the research results, actual field survey methods, data analysis and numerical modeling methods are used in this article. Findings. Analysis of the results from the numerical model determined that the total height of the collapsed and cracked area when exploiting the longwall 21103 in Seam 11 is about 85 m. The subsidence to the ground is about 10 cm from the center of the subsidence area. The analysis results from the numerical model also show that the roof collapse angle is 69°, thereby determining the area of influence on the topographic surface in the range of 55 m. Results on the cross-sections show that the boundary of the influence of mining on the topographic surface is the closest section 6–6, which is about 12 m. The stability time of the collapsed rock mass is determined to be about 5 months. Originality. On the basis of UDEC (Universal Distinct Element Code) software, the authors have developed a simulation model for the mining process of the longwall 21103 in Seam 11. Analysis of the results from the model has shown the state of displacement and deformation of the surrounding rock mass. In this study, the numerical modeling method is applied to simulate the displacement of the longwall, which is consistent with the actual production of the underground mine. This enabled the authors to assess and identify the affected area with the required degree of reliability. Practical value. The research results of the paper are used as a basis for implementation in actual production at Nui Beo Coal Mine. On the basis of the analysis of the surrounding rock mass displacements and deformations, when exploiting the longwall 21103 in Seam 11 at Nui Beo Coal Mine, the affected boundary of the topographic surface has been determined. At the same time, the stability time of the collapsed rock mass is also calculated. So, this is also the basis for Nui Beo Coal Mine to plan construction works on the site outside the determined affected areas to ensure the safety of such works.

22 June 2023 in Journal of Sustainable Mining
Verified
Journal Article
Open access
PDF file
TVTien Trung Vũ
Tien Trung Vũ
DDDoan Viet Dao
Doan Viet Dao
The re-exploitation of coal seams located near the ground is one of the solutions to increase output, reduce mining investment costs, and avoid wasting coal resources. The re-exploitation of coal seams will also cause instability of the surrounding rock mass and may affect surface construction works. Through the process of re-exploiting the longwall in seam H10 at Mong Duong Coal Mine, the authors have studied and evaluated the stability of the rock mass and +30 level surface works (including fan station and gateroad). To achieve the results in this study, the numerical simulation model method and the analytical method were applied. The model analysis results have determined that the displacement and deformation areas of the rock mass around the mining area correspond to the length of the cut in the strike direction of the longwall H10. The analysis and calculation results from the model show that the longwall in seam H10 can be re-exploited when leaving a protective coal pillar about 50 m from the center of the +30 fan station at the east side; this distance ensures the stability of the rock mass that located near the ground and the surface works at +30.