Montassar Aidi Sharif

Dr. Montassar Aidi Sharif

orcid

Research Focus & Metrics

Academic Career Length

15Years (2012-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2015 in IEEE/ASME Transactions on Mechatronics
Verified
Journal Article
Open access
HLHong Lei
Hong Lei
MSMontassar Aidi Sharif
Montassar Aidi Sharif
XTXiaobo Tan
Xiaobo Tan
Typical ionic polymer-metal composite (IPMC) sensors are in the shape of beams, and only respond to stimuli acting perpendicular to the beam plane. In this paper, we present a novel, omnidirectional, tubular IPMC sensor that responds to all stimuli perpendicular to the tube axis. With one common inner electrode and four outer electrodes, the tubular IPMC sensor provides four routes of common-ground current outputs. With a custom-made setup, the response of each sensor route is characterized under tip deflection in different orientations at frequencies 1-20 Hz, which verifies the sensor's omnidirectional sensing capability and shows little mechanoelectrical coupling between neighboring sensor routes. An analytical dynamic model, in the form of an infinite-dimensional transfer function, is developed for the sensor, which captures the internal ion-transport physics and the effect of contact resistance. Experimental results show that the proposed model is able to capture the tubular sensor dynamics. Finally, the original model is reduced to a finite-dimensional one, based on which an inversion algorithm is used to reconstruct the mechanical stimulus given the sensor output. The effectiveness of the reconstruction approach is demonstrated experimentally.

19 April 2017 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
PDF file
AAAli Ahrari
Ali Ahrari
HLHong Lei
Hong Lei
MSMontassar Aidi Sharif
Montassar Aidi Sharif
Kalyanmoy DebKalyanmoy Deb
Kalyanmoy Deb
XTXiaobo Tan
Xiaobo Tan
Inspired by the lateral line of aquatic vertebrates, an artificial lateral line (ALL) system can localize and track an underwater moving object by analyzing the ambient flow caused by its motion. There are several studies on object detection, localization and tracking by ALL systems, but only a few have investigated the optimal design of the ALL system, the one that on average provides the highest characterization accuracy. Design optimization is particularly important because the uncertainties in the employed flow model and in sensor measurements deteriorate the reliability of sensing. This study investigates the optimal design of the ALL system in three-dimensional (3D) space for dipole source characterization. It highlights some challenges specific to the 3D setting and demonstrates the shortcomings of the designs in which all sensors and their sensing directions are in the same plane. As an alternative, it proposes two design concepts, called 'Offset Strategy' and 'Angle Strategy' to overcome these shortcomings. It investigates potentials of having a swarm of cooperative ALLs as well. It performs design optimization in the presence of sensor and model uncertainties and analyzes the trade-off between the number of sensors and characterization accuracy. The obtained solutions are analyzed to reveal their strategies in solving the problem efficiently. The dependency of the optimized solutions on the uncertainties is also demonstrated.

29 July 2019 in Bioinspiration & Biomimetics
Verified
Journal Article
Closed access
PDF file
MSMontassar Aidi Sharif
Montassar Aidi Sharif
XTXiaobo Tan
Xiaobo Tan
It is of interest to exploit the insight from the lateral line system of fish for flow sensing applications. In this paper, a novel fish canal lateral line-inspired pressure difference sensor is proposed by embedding an ionic polymer-metal composite (IPMC) sensor within a canal filled with viscous fluid. Such a sensor could be used by underwater robots and vehicles for object detection, angle of attack measurement, and source localization. Unlike the biological counterpart that has open ends on the surface of the body, the proposed sensor has two pores covered with a latex membrane, which prevents the canal fluid from mixing with the ambient fluid. The design and fabrication of the sensor are presented, where the sensor is integrated with a fish-like body. The sensor output is experimentally characterized as the fish-like body is rotated with respect to a dipole source, which confirms that the sensor is capable of capturing the pressure difference between the two pores. Finite element modeling and simulation that capture fluid-structure interactions and IPMC physics are conducted to shed light on the sensor behavior. Finally, the utility of the sensor in underwater robotics is illustrated via orienting the fish-like body towards the dipole source using feedback from the proposed sensor.

13 April 2016 in Engineering Optimization
Verified
Journal Article
Closed access
AAAli Ahrari
Ali Ahrari
HLHong Lei
Hong Lei
MSMontassar Aidi Sharif
Montassar Aidi Sharif
KDKalyanmoy Deb
Kalyanmoy Deb
XTXiaobo Tan
Xiaobo Tan
An artificial lateral line (ALL) system consists of a set of flow sensors around a fish-like body. An ALL system aims to identify surrounding moving objects, a common example of which is a vibrating sphere, called a dipole. Accurate identification of a vibrating dipole is a challenging task because of the presence of different types of uncertainty in measurements or in the underlying flow model. Proper selection of design parameters of the ALL system, including the shape, size, number and location of the sensors, can highly influence the identification accuracy. This study aims to find such an optimum design by developing a specialized bi-level optimization methodology. It identifies and simulates different sources of uncertainty in the problem formulation. A parametric fitness function addresses computational and practical goals and encompasses the effect of different sources of uncertainty. It can also analyse the trade-off between localization accuracy and the number of sensors. Comparison of the results for different extents of uncertainty reveals that the optimized design strongly depends on the amount of uncertainty as well as the number of sensors. Consequently, these factors must be considered in the design of an ALL system. Another highlight of the proposed bi-level optimization methodology is that it is generic and can be readily extended to solve other noisy and nested optimization problems.

12 June 2018 in Smart Materials and Structures
Verified
Journal Article
Closed access
PDF file
MSMontassar Aidi Sharif
Montassar Aidi Sharif
HLHong Lei
Hong Lei
MAMohammed Khalid Al-Rubaiai
Mohammed Khalid Al-Rubaiai
XTXiaobo Tan
Xiaobo Tan
Ionic polymer-metal composites (IPMCs) have intrinsic sensing and actuation properties. Typical IPMC sensors are in the shape of beams and only respond to stimuli acting along beam-bending directions. Rod or tube-shaped IPMCs have been explored as omnidirectional bending actuators or sensors. In this paper, physics-based modeling is studied for a tubular IPMC sensor under pure torsional stimulus. The Poisson–Nernst–Planck model is used to describe the fundamental physics within the IPMC, where it is hypothesized that the anion concentration is coupled to the sum of shear strains induced by the torsional stimulus. Finite element simulation is conducted to solve for the torsional sensing response, where some of the key parameters are identified based on experimental measurements using an artificial neural network. Additional experimental results suggest that the proposed model is able to capture the torsional sensing dynamics for different amplitudes and rates of the torsional stimulus.

18 April 2016
Verified
Conference Paper
Closed access
PDF file
HLHong Lei
Hong Lei
MSMontassar Aidi Sharif
Montassar Aidi Sharif
DPDerek A. Paley
Derek A. Paley
MMMatthew J. McHenry
Matthew J. McHenry
XTXiaobo Tan
Xiaobo Tan