Yttrium aluminum garnet (YAG)-based optical fiber is one of the research hotspots in the field of fiber lasers due to its combined advantages of a wide doping range of rare earth ions and the high mechanical strength of YAG material, as well as the flexibility and small size of the fiber structure. YAG-based optical fibers and related laser devices can be used in communication, sensing, medicine, etc. A comprehensive review of YAG-based optical fibers is provided in this paper. Firstly, the fabrication processes of YAG-based optical fibers are summarized and the structure and properties of fibers are classified and compared. Secondly, according to the optical wavelength regions, rare earth-doped YAG-based optical fibers for the applications of single-frequency and mode-locked fiber lasers are summarized. Lastly, the development challenges in both the fabrication and applications of YAG-based optical fibers are discussed.
Compared to the universal photochemical mechanism in photoactivation, the photophysical-dominant behavior is rarely reported. In this study, a luminogen with aggregation-induced emission characteristic named TIOdB with a double-ionized framework was prepared, and it exhibited an obvious photoactivation phenomenon with continuous light irradiation. Employing a series of spectral and electro experiments, the morphology and crystal analyses, and theoretical simulation, the potential mechanism of photo-induced crystallization with emission enhancement (PICEE) is presented to illuminate this photoactivation process, which offered a novel strategy for the IN SITU formation of nanocrystals. Particularly, the linear relationship between the illumination intensity and fluorescence enhancement of TIOdB was revealed, which has the potential to optimize plant growth conditions. Besides, TIOdB could be used as a high-quality mitochondrion imaging probe with the light-activated property and cancer cell killing performance.
High-performance thermoelectric fibers with n-type bismuth telluride (Bi2Te3) core were prepared by thermal drawing. The nanosheet microstructures of the Bi2Te3 core were tailored by the whole annealing and Bridgman annealing processes, respectively. The influence of the annealing processes on the microstructure and thermoelectric performance was investigated. As a result of the enhanced crystalline orientation of Bi2Te3 core caused by the above two kinds of annealing processes, both the electrical conductivity and thermal conductivity could be improved. Hence, the thermoelectric performance was enhanced, that is, the optimized dimensionless figure of merit (ZT) after the Bridgman annealing processes increased from 0.48 to about 1 at room temperature.