Tm3+ doped barium gallo-germanate (BGG) glass has emerged as a promising 2.0 μm laser material offering excellent optical property. Unfortunately, low anti-crystallization ability and high OH- content of the glass have hindered the fabrication of high-quality optical fibers. In this paper, La2O3 and Y2O3 were added into BGG glass to enhance the glass anti-crystallization ability. Additionally, the optimized Reaction Atmosphere Procedure (RAP) was utilized to minimize OH- content. Continuous Tm3+ doped BGG glass single-mode (SM) fibers were successfully obtained by the rod-in-tube technique for the first time to our best knowledge. A 140 mW all-fiber laser at 1.95 μm was demonstrated using a 9.7-cm-long as-drawn Tm3+ doped BGG glass SM fiber upon excitation of a home-made 1568 nm fiber laser.
Highly Tm3+doped optical fibers are urgently desirable for 2.0 μm compact single-frequency fiber laser and high-repetition-rate mode-locked fiber laser. Here, we systematically investigated the optical parameters, energy transfer processes and thermal properties of Tm3+doped barium gallo-germanate (BGG) glasses. Highly Tm3+doped BGG glass single mode (SM) fibers were fabricated by the rod-in-tube technique. The Tm3+doping concentration reaches 7.6 × 1020ions/cm3, being the reported highest level in Tm3+doped BGG SM fibers. Using ultra short (1.6 cm) as-drawn highly Tm3+doped BGG SM fiber, a single-frequency fiber laser at 1.95 μm has been demonstrated with a maximum output power of 35 mW when in-band pumped by a home-made 1568 nm fiber laser. Additionally, a multilongitudinal-mode fiber laser at 1.95 μm has also been achieved in a 10 cm long as-drawn active fiber, yielding a maximum laser output power of 165 mW and a slope efficiency of 17%. The results confirm that the as-drawn highly Tm3+doped BGG SM fibers are promising in applications that require high gain and high power from a short piece of active optical fiber.
Tm3+ doped lead silicate glasses with good thermal stability were prepared by the melt-quenching method. Based on the absorption and emission spectra, Judd-Ofelt intensity parameters, absorption and emission cross sections, gain spectra, and σe × FWHM were calculated and analyzed. These results suggest that Tm3+ doped lead silicate glasses are promising as mid-infrared laser materials. Tm3+ doped lead silicate glass single mode (SM) fibers with cladding diameter of 125 μm and core diameter of 8.5 μm were then fabricated by the rod-in-tube technique. The Tm3+ doping concentration reached as high as 4.545 × 1020 ions/cm3. ~2.0 μm amplified spontaneous emission (ASE) was realized in a 3.5-cm-long as-drawn SM fiber when pumped by a homemade single mode 1560 nm fiber laser. The results indicate that these Tm3+ doped lead silicate glass single mode fibers are promising fiber material for 2.0 μm fiber laser applications.
Bi2Te3-based materials have been reported to be one of the best room-temperature thermoelectric materials, and it is a challenge to substantially improve their thermoelectric properties. Here novel Bi2Te3 core fibers with borosilicate glass cladding were fabricated utilizing a modified molten core drawing method. The Bi2Te3 core of the fiber was found to consist of hexagonal polycrystalline nanosheets, and polycrystalline nanosheets had a preferential orientation; in other words, the hexagonal Bi2Te3 lamellar cleavage more tended to be parallel to the symmetry axis of the fibers. Compared with a homemade 3-mm-diameter Bi2Te3 rod, the polycrystalline nanosheets’ preferential orientation in the 89- m-diameter Bi2Te3 core increased its electrical conductivity, but deduced its Seebeck coefficient. The Bi2Te3 core exhibits an ultrahigh ZT of 0.73 at 300 K, which is 232% higher than that of the Bi2Te3 rod. The demonstration of fibers with oriented nano-polycrystalline core and the integration with an efficient fabrication technique will pave the way for the fabrication of high-performance thermoelectric fibers.
Broadband amplified spontaneous emissions with a full width at half-maximum (FWHM) varying from to were obtained from the Ho/Cr/Tm:yttrium aluminum garnet (YAG) crystal derived fibers, which were drawn using a molten core method. The core-cladding structure of the as-drawn fibers was preserved completely, and the core was found to be amorphous. What is more, an all-fiber-integrated passively mode-locked laser based on an 8 cm long Ho/Cr/Tm:YAG crystal derived all-glass fiber was built which, to the best of our knowledge, is the first demonstration of a mode-locked fiber laser in a similar YAG derived fiber. The mode-locked pulses operate at 1.95 μm with duration of , and the repetition rate is . Limited by the bandwidth of the fiber grating used in the laser cavity, the mode-locking spectrum has a relatively narrow FWHM of . These results suggest that the broadband YAG crystal derived all-glass fibers are promising for ultrafast fiber lasers applications.