Dragan Slobodan Mihic

Dr. Dragan Slobodan Mihic

University of Belgrade, School of Electrical Engineering, Belgrade, Beograd, Serbia
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 June 2017 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic
Normal operation of switched reluctance motor (SRM) includes periods of simultaneous conduction of more than one phase. During these periods, currents of consecutive phases overlap, thereby producing mutual coupling between them that affects motor performance. For accurate performance prediction it is necessary to take mutual coupling into account. This is done through the new nonlinear analytical model presented in this paper. It can be used for fast design and optimization of any SRM configuration and with different converter topologies and control algorithms. Starting from the simple nonlinear model, based on single phase considerations, a new model comprising multiphase excitation is introduced. The model development is illustrated through the examples of 6/4 and 8/6 SRM. Using developed model, main motor characteristics are obtained and then compared to the simple model in order to envisage the differences. The new model is then validated through finite element method simulations. Additionally, experimental verification is provided for 6/4 SRM.

1 March 2014 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic
The subject of this paper is high-speed induction motor (IM) with drag-cup rotor with low inertia, designed for use in high-speed automotive applications such as kinetic energy recovery system (KERS). The aim of this paper is to present the optimization procedure of the air-gap length and the rotor thickness of this kind of motor in order to achieve the highest efficiency in the speed and torque range of interest. Simple procedure for stator dimensioning was conducted in order to get main dimensions of the motor. Based upon reasonable approximations, analytical considerations are performed in order to envisage and demonstrate the effects of changes in the rotor thickness and the two air-gap lengths on the motor performance. Starting with these raw results, finite element method (FEM) tools are used to obtain more precise performance prediction, and to perform the optimization of the air-gap lengths and the rotor thickness. Finally, simulation results were consolidated, presented, and used to draw conclusions and propose design guidelines.

23 December 2015 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic
The aim of this paper is to investigate the impact of material properties on performance and optimal geometry of high-speed drag-cup induction motor (IM). Preliminary analytical considerations are performed in order to envisage and demonstrate the effects of changes of material specific conductivity on the motor performance. Based on these conclusions, 2-D finite element method (FEM) motor model is used to obtain performance prediction, and to perform the optimization of rotor geometry and air gaps for three different rotor materials in order to find a solution with the best possible efficiency in defined operation region. Simulation results are then verified and corrected through 3-D FEM simulations. After this, thermal and mechanical properties of all the three optimal solutions are investigated using some analytical formulas and 3-D FEM simulations. Based on the performed analysis and the evaluation of electromagnetic, thermal, and mechanical properties, the best solution is selected. Finally, the prototype of machine which is electromagnetically similar to drag-cup IM is built and tested. Results are compared with the FEM simulations in order to verify the given optimization procedure.

2 August 2022 in Machines
Verified
Journal Article
Open access
PDF file
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
The popularity of electric bicycles (e-bikes) among urban commuters and cyclists is constantly increasing because e-bikes provide an efficient, more powerful, and a low-cost mode of transportation. Since the main issue is to increase the power density of the drive system, a permanent magnet (PM) machine is the preferred choice. In mid-drive systems, higher speed motors are commonly used, which provides the opportunity to use switched reluctance machines (SRM), because they can provide better performance when designed for higher speeds. Moreover, the simple, robust, and low-cost structure of SRM makes it a favorable option for e-bike drive systems. In this paper, an SRM design for an e-bike mid-drive system is investigated. Several 3-phase configurations with higher number of rotor poles than the stator poles are considered: 6/10, 6/14, and 12/16, as well as the conventional 12/8 SRM, for the sake of comparison. Main dimensions and requirements are defined from Shimano Steps mid-drive PM machine, whose characteristics are taken as the design goal. According to the results, the best configuration is selected and further optimized, leading to the final design for which a prototype is built and tested.

1 January 2013 in Advances in Electrical and Computer Engineering
Verified
Journal Article
Open access
PDF file
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
SVS. N. Vukosavic
S. N. Vukosavic
A huge number of modern applications nowadays require the use of high speed electrical machines which need to be highly optimized in order to achieve the best efficiency and the lowest ...

25 January 2020 in Electrical Engineering
Verified
Journal Article
Closed access
PDF file
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
MTMladen V. Terzic
Mladen V. Terzic
BBBogdan M. Brkovic
Bogdan M. Brkovic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic