Mladen Vlajko Terzic

Dr. Mladen Vlajko Terzic

University of Belgrade, School of Electrical Engineering, Belgrade, Beograd, Serbia
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 July 2019 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
BBBerker Bilgin
Berker Bilgin
JLJianbin Liang
Jianbin Liang
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
JDJianning Dong
Jianning Dong
RRRomina Rodriguez
Romina Rodriguez
AEAli Emadi
Ali Emadi
This paper presents a comprehensive state-of-the-art review of the modeling and analysis methods for the multidisciplinary design of electric motors for various applications including vehicular power and propulsion systems and electrified powertrains. It covers the important aspects of different engineering domains, such as dynamic modeling, loss calculations, demagnetization analysis, thermal modeling, acoustic noise and vibration analysis, and mechanical stress modeling. This paper intends to guide the electric motor designers through examples and results on how to apply different analysis techniques on electric motors.

5 June 2017 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic
Normal operation of switched reluctance motor (SRM) includes periods of simultaneous conduction of more than one phase. During these periods, currents of consecutive phases overlap, thereby producing mutual coupling between them that affects motor performance. For accurate performance prediction it is necessary to take mutual coupling into account. This is done through the new nonlinear analytical model presented in this paper. It can be used for fast design and optimization of any SRM configuration and with different converter topologies and control algorithms. Starting from the simple nonlinear model, based on single phase considerations, a new model comprising multiphase excitation is introduced. The model development is illustrated through the examples of 6/4 and 8/6 SRM. Using developed model, main motor characteristics are obtained and then compared to the simple model in order to envisage the differences. The new model is then validated through finite element method simulations. Additionally, experimental verification is provided for 6/4 SRM.

1 March 2014 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic
The subject of this paper is high-speed induction motor (IM) with drag-cup rotor with low inertia, designed for use in high-speed automotive applications such as kinetic energy recovery system (KERS). The aim of this paper is to present the optimization procedure of the air-gap length and the rotor thickness of this kind of motor in order to achieve the highest efficiency in the speed and torque range of interest. Simple procedure for stator dimensioning was conducted in order to get main dimensions of the motor. Based upon reasonable approximations, analytical considerations are performed in order to envisage and demonstrate the effects of changes in the rotor thickness and the two air-gap lengths on the motor performance. Starting with these raw results, finite element method (FEM) tools are used to obtain more precise performance prediction, and to perform the optimization of the air-gap lengths and the rotor thickness. Finally, simulation results were consolidated, presented, and used to draw conclusions and propose design guidelines.

23 December 2015 in IEEE Transactions on Energy Conversion
Verified
Journal Article
Closed access
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
DMDragan Slobodan Mihic
Dragan Slobodan Mihic
SVSlobodan N. Vukosavic
Slobodan N. Vukosavic
The aim of this paper is to investigate the impact of material properties on performance and optimal geometry of high-speed drag-cup induction motor (IM). Preliminary analytical considerations are performed in order to envisage and demonstrate the effects of changes of material specific conductivity on the motor performance. Based on these conclusions, 2-D finite element method (FEM) motor model is used to obtain performance prediction, and to perform the optimization of rotor geometry and air gaps for three different rotor materials in order to find a solution with the best possible efficiency in defined operation region. Simulation results are then verified and corrected through 3-D FEM simulations. After this, thermal and mechanical properties of all the three optimal solutions are investigated using some analytical formulas and 3-D FEM simulations. Based on the performed analysis and the evaluation of electromagnetic, thermal, and mechanical properties, the best solution is selected. Finally, the prototype of machine which is electromagnetically similar to drag-cup IM is built and tested. Results are compared with the FEM simulations in order to verify the given optimization procedure.

1 September 2018
Verified
Conference Paper
Closed access
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
HLHaoding Li
Haoding Li
BBBerker Bilgin
Berker Bilgin
AEAli Emadi
Ali Emadi
Normal operation of switched reluctance motors is highly nonlinear, and in order to predict its performance, it is of great importance to know precisely its flux linkage or inductance profiles as a function of the current and rotor position. In the design stage, these profiles are usually obtained by batch of FEA simulations. On the real machine, they can be obtained by different types of tests. The aim of this paper is to give a detailed overview of existing methods through comparison, and classification of these methods. Some methods are selected as more preferable based on their simplicity, implementation speed, or accuracy. These methods are then compared experimentally on an SRM drive.

1 September 2018
Verified
Conference Paper
Closed access
Mladen Vlajko TerzicMladen Vlajko Terzic
Mladen Vlajko Terzic
BBBerker Bilgin
Berker Bilgin
AEAli Emadi
Ali Emadi
This paper presents the design of a switched reluctance motor (SRM) for the traction motor of a forklift application. Design constraints and input parameters are defined according to the specifications of a forklift traction motor. Three-phase induction machines are commonly used for forklift propulsion systems. Several SRM configurations with higher number of rotor than stator poles are designed in order to compare their characteristics and capabilities. These configurations are 12/16, 12/20 and 18/24, and they are compared in terms of average torque, weight, RMS torque ripple, efficiency and temperature rise. Initial designs are obtained by basic analytical sizing equations. Optimization of initial designs is performed using combined analytical-FEA approach and genetic algorithm control optimization. Optimization goal is to achieve the design with the lowest volume and mass to increase torque density (torque/volume) and specific torque (torque/mass). The results show that 12/16 SRM is a suitable configuration for the forklift propulsion application due to its higher torque density.